From: Dumitru Ciobarcianu <Dumitru.Ciobarcianu@iNES.RO>
To: jt@hpl.hp.com
Cc: Marcelo Tosatti <marcelo@conectiva.com.br>,
Linux kernel mailing list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2.4] : donauboe IrDA driver (resend)
Date: 19 Dec 2002 17:05:16 +0200 [thread overview]
Message-ID: <1040310314.1225.9.camel@localhost.localdomain> (raw)
In-Reply-To: <20021219024632.GB1746@bougret.hpl.hp.com>
[-- Attachment #1: Type: text/plain, Size: 4912 bytes --]
Hello,
This module does not load all the time for me.
If I do an "modprobe donauboe" it gives something like:
TX: (144,80) (144,84) (144,80) (144,84) (0,00) (0,00) (0,00) (0,00)
[9600]
RRTSRRT 4181
RX: (130,00) (130,00) (130,00) (130,00) (0,80) (0,80) (0,80) (0,80)
TX: (144,80) (144,84) (144,80) (144,84) (0,00) (0,00) (0,00) (0,00)
[115200]
RRTSRRT 4117
RX: (130,00) (130,00) (130,00) (130,00) (0,80) (0,80) (0,80) (0,80)
TX: (128,84) (128,90) (128,84) (128,b4) (0,00) (0,00) (0,00) (0,00)
[4000000]
TSRTSTR 3861
RX: (264,00) (264,20) (0,80) (0,80) (0,80) (0,80) (0,80) (0,80)
TX: (128,84) (128,90) (128,84) (128,b4) (0,00) (0,00) (0,00) (0,00)
[1152000]
TSTST<3>toshoboeprobe(1152000) failed filter test
toshoboe: Register dump:
Interrupts: Tx:203 Rx:0 TxUnder:0 RxOver:0 Sip:0
RX 00 TX 44 RingBase 0f355c00
RING_SIZE 11 IER ff ISR 07
CONFIG1 08 STATUS 00
CONFIG0 4ea0 ENABLE 937c
NEW_PCONFIG 0101 CURR_PCONFIG 0101
MAXLEN 0c04 RXCOUNT 0100
Ring at 0f355c00:
RX: (0,80) (0,80) (0,80) (0,80) (0,80) (0,80) (0,80) (0,80)
TX: (128,00) (128,00) (128,00) (128,00) (0,00) (0,00) (0,00) (0,00)
If I try a few more times it will finally load...
The kernel is 2.4.20.0.pp.9 (RH rawhide kernel - 2.4.20-ac1 based) +
acpi20021205 . I don't know why lspci shows "Toshiba Tecra 8100". The
machine is an Toshiba Satellite Pro 4320.
Output of lspci:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
Subsystem: Toshiba America Info Systems Toshiba Tecra 8100 Laptop
System Chipset
Flags: bus master, medium devsel, latency 64
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f0000000-f7ffffff
00:05.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:05.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at fff0 [size=16]
00:05.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at ff80 [size=32]
00:05.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
00:07.0 Communication controller: Lucent Microelectronics 56k WinModem
(rev 01)
Subsystem: Toshiba America Info Systems Internal V.90 Modem
Flags: bus master, medium devsel, latency 0, IRQ 3
Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
I/O ports at 02f8 [size=8]
I/O ports at 1c00 [size=256]
Capabilities: <available only to root>
00:09.0 IRDA controller: Toshiba America Info Systems FIR Port Type-DO
Subsystem: Toshiba America Info Systems FIR Port Type-DO
Flags: slow devsel, IRQ 11
I/O ports at ff60 [size=32]
Capabilities: <available only to root>
00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 168, IRQ 11
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S
Audio Controller] (rev 02)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at efff8000 (32-bit, non-prefetchable) [size=32K]
I/O ports at ff00 [size=64]
I/O ports at fefc [size=4]
Capabilities: <available only to root>
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev
11) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: <available only to root>
--
Cioby
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2002-12-19 14:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-19 2:46 [PATCH 2.4] : donauboe IrDA driver (resend) Jean Tourrilhes
2002-12-19 15:05 ` Dumitru Ciobarcianu [this message]
2002-12-19 18:56 ` Jean Tourrilhes
2002-12-20 10:55 ` Dumitru Ciobarcianu
2002-12-20 18:05 ` Christian Gennerat
2002-12-21 9:16 ` Dumitru Ciobarcianu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1040310314.1225.9.camel@localhost.localdomain \
--to=dumitru.ciobarcianu@ines.ro \
--cc=jt@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo@conectiva.com.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.