Re: Using an device alias?

[Raymond Leach <raymondl@knowledgefactory.co.za>]

[-- Attachment #1: Type: text/plain, Size: 1660 bytes --]

Hi

It doesn't make sense to attach rules to alias interfaces, since the
packets are coming in the same physical interface whether it is eth0:1
or eth0.

So if you use just eth0 your rules should work as expected as long as
you qualify them further with the correct (alias)ip.

Ray

On Fri, 2003-01-03 at 21:28, Steve M Bibayoff wrote:
> Sorry if everyone gets this twice, this one is a
> second posting when I realized this was a closed list.
> 
> Original question:
> Is it possible to use iptables with a device alias
> (ex.. eth0:1)? I tries to add a filter rule and got
> an error:
> % iptables -t filter -I INPUT -i eth0:1 -j ACCEPT
> Warning: wierd character in interface `eth0:1' (No
> aliases, :, ! or *).
> 
> If i list the rules, it's listed, but it doesn't
> appear to be working. I was wondering if someone had
> a definite answer.
> 
> TIA
> 
> Steve
> 
-- 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(  Raymond Leach                       )
 ) Knowledge Factory                  (
(                                      )
 ) Tel: +27 11 445 8100               (
(  Fax: +27 11 445 8101                )
 )                                    (
(  http://www.knowledgefactory.co.za/  )
 ) http://www.saptg.co.za/            (
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   o                                o
    o                              o
        .--.                  .--.
       | o_o|                |o_o |
       | \_:|                |:_/ |
      / /   \\              //   \ \
     ( |     |)            (|     | )
     /`\_   _/'\          /'\_   _/`\
     \___)=(___/          \___)=(___/

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]