From mboxrd@z Thu Jan 1 00:00:00 1970 From: Petter Larsen Date: 25 Feb 2003 20:59:59 +0100 Subject: [U-Boot-Users] Simple bootloader in the kernel and PPCBoot In-Reply-To: <20030225172107.AFF84C6E0C@atlas.denx.de> References: <20030225172107.AFF84C6E0C@atlas.denx.de> Message-ID: <1046203198.1168.21.camel@pla> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi > The BDM4GDB parallel port adapter is 49.95 Euro, which includes > cables (BDM, parallel port) and software on CDROM. > > The list price for the bundle BDI2000 plus interface software > "bdiGDB" for GDB debugger is 2430 Euro. > I think that I shall buy one of these. If a am going to debug the Linux kernel and modules on a 8xx processor, is it good enough with the BDM4GDB? What is the difference on these two? With the BDM4GDB, can I use frontends for the gdb sw, like ddd or the debugger embedded inside the kdevelop ide? > > That's right. If I load it into RAM on location 100000 and say "go > > 110000" it boots... > > But it does only work if I say "go" from RAM, not from flash. But if I > > This means that the "simple" bootstrap loader is not even capable of > doing this right :-( > > > encapsulate the image with an header with "mkimage" I can boot it from > > flash using the "bootm " command. > > Because then bootm will copy the code to the load address first. But > the "simple" bootstrap loader is really overkill then: everything it > does is already included with U-Boot, just better. You said earlier that i must have missed something in my port. Did you mean the port of PPCBoot or the Linux kernel? After PPCBoot sends the control over to Linux, which file in the source tree is first executed? Is it the assembler file arch/ppc/kernel/head_8xx.S? Best regards Petter Larsen