All of lore.kernel.org
 help / color / mirror / Atom feed
From: mdew <mdew@mdew.dyndns.org>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Fwd: Stv0680-usb-general] USB error?
Date: 03 Mar 2003 17:22:56 +1300	[thread overview]
Message-ID: <1046665376.15584.29.camel@nirvana.flat> (raw)

[-- Attachment #1: Type: text/plain, Size: 33 bytes --]


-- 
mdew <mdew@mdew.dyndns.org>

[-- Attachment #2: Forwarded message - [Stv0680-usb-general] USB error? --]
[-- Type: message/rfc822, Size: 10872 bytes --]

From: mdew <mdew@mdew.dyndns.org>
To: stv0680-usb <stv0680-usb-general@lists.sourceforge.net>
Subject: [Stv0680-usb-general] USB error?
Date: 03 Mar 2003 15:09:52 +1300
Message-ID: <1046657391.16334.26.camel@nirvana.flat>

nirvana:~/pencam2-0.65# ./pencam2
 usb_claim_interface error
 usb_claim_interface error

 *  *  *  *  *   PENCAM2 ver 0.65 for STV0680 usb cameras   *  *  *  * 
*

 STV Camera @     Camera Pictures     Firmware     ASIC rev     Sensor
ID
   001:063               2              3.00         7.60         410.10
 *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  * 
*
 Supported formats: CIF (352x288)    QCIF (176x144)
 *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  * 
*


stv680.c: [stv680_probe:1519] STV(i): STV0680 camera found.
stv680.c: [stv680_probe:1547] STV(i): registered new video device:
video1
usbdevfs: process 16500 (pencam2) did not claim interface 0 before use
usb-uhci.c: interrupt, status 3, frame# 1933
usbdevfs: USBDEVFS_CONTROL failed dev 63 rqt 192 rq 4 len 0 ret -32
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 63 rqt 192 rq 134 len 16 ret -110
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 63 rqt 192 rq 134 len 16 ret -110
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 63 rqt 192 rq 134 len 16 ret -110



x = Start/stop autosnap

Enter your choice: x
 usb_bulk_read error
 usb_control_msg error: 9,  command = 0x21
 Re-initializing camera
 usb_control_msg error: 16,  command = 0x86
 Couldn't get image info
 usb_control_msg error: 16,  command = 0x86
 Couldn't get image info
 usb_control_msg error: 16,  command = 0x86
 Couldn't get image info
 Couldn't get picture after 3 tries, giving up!

nirvana:~# cat /proc/video/stv680/video1
driver_version  : v0.25
model           : STV0680
in use          : no
streaming       : no
num_frames      : 2
Current size    : 0x0
swapRGB         : (auto) off
Palette         : 0
Frames total    : 0
Frames read     : 0
Packets dropped : 0
Decoding Errors : 0

nirvana:~# cat /proc/video/dev/video1
name            : STV0680 USB camera
type            : VID_TYPE_CAPTURE
hardware        : 0x1e

nirvana:~# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
4000-403f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
5000-501f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
9000-9fff : PCI Bus #01
a000-a01f : Intel Corp. 82371AB/EB/MB PIIX4 USB
  a000-a01f : usb-uhci
a400-a43f : Yamaha Corporation YMF-744B [DS-1S Audio Controller]
  a400-a401 : OPL2/3 (left)
  a402-a403 : OPL2/3 (right)
  a420-a421 : MPU401 UART
a800-a803 : Yamaha Corporation YMF-744B [DS-1S Audio Controller]
ac00-acff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
  ac00-acff : 8139too
b000-b007 : Promise Technology, Inc. 20262
  b000-b007 : ide2
b400-b403 : Promise Technology, Inc. 20262
  b402-b402 : ide2
b800-b807 : Promise Technology, Inc. 20262
bc00-bc03 : Promise Technology, Inc. 20262
c000-c03f : Promise Technology, Inc. 20262
  c000-c007 : ide2
  c008-c00f : ide3
  c010-c03f : PDC20262
f000-f00f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
  f000-f007 : ide0
  f008-f00f : ide1

nirvana:~# cat /proc/bus/usb/drivers
         usbdevfs
         hub
         hid
 48- 63: usbscanner
         usb_mouse
         stv680
         usb-storage

nirvana:# cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=126/900 us (14%), #Int=  4, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=a000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=055f ProdID=0006 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=496mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbscanner
E:  Ad=01(O) Atr=02(Bulk) MxPS=   2 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=1ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 4
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0e01 Rev= 0.04
S:  Product=USB HUB
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 59 Spd=12  MxCh= 4
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03eb ProdID=3301 Rev= 3.00
S:  Product=Standard USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 64mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=03 Prnt=59 Port=00 Cnt=01 Dev#= 63 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0553 ProdID=0202 Rev= 0.00
S:  Manufacturer=STMicroelectronics
S:  Product=USB Dual-mode Camera
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 70mA
I:  If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=stv680
I:  If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=stv680
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
T:  Bus=01 Lev=03 Prnt=59 Port=01 Cnt=02 Dev#= 60 Spd=1.5 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=09da ProdID=0006 Rev= 1.00
S:  Manufacturer=A4Tech
S:  Product=USB Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms
T:  Bus=01 Lev=03 Prnt=59 Port=03 Cnt=03 Dev#= 61 Spd=1.5 MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0663 ProdID=0103 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   7 Ivl=10ms

nirvana:# lsmod
Module                  Size  Used by    Tainted: P
vfat                   10860   0  (autoclean)
fat                    32760   0  (autoclean) [vfat]
usb-storage            24016   0  (unused)
sd_mod                 10892   0  (autoclean) (unused)
stv680                 24696   0
parport_pc             23752   1  (autoclean)
lp                      6912   0  (autoclean)
snd-pcm-oss            37700   0  (autoclean)
snd-mixer-oss          10936   1  (autoclean) [snd-pcm-oss]
NVdriver             1061664   0  (unused)
joydev                  5920   0  (unused)
usbmouse                2296   0  (unused)
scanner                 9336   0
mousedev                4340   1
keybdev                 2144   0  (unused)
snd-ymfpci             41776   1
snd-pcm                53472   0  [snd-pcm-oss snd-ymfpci]
snd-opl3-lib            6404   0  [snd-ymfpci]
snd-timer              11080   0  [snd-pcm snd-opl3-lib]
snd-hwdep               4256   0  [snd-opl3-lib]
snd-mpu401-uart         3168   0  [snd-ymfpci]
snd-rawmidi            13696   0  [snd-mpu401-uart]
snd-seq-device          4156   0  [snd-opl3-lib snd-rawmidi]
snd-ac97-codec         26948   0  [snd-ymfpci]
snd                    26308   0  [snd-pcm-oss snd-mixer-oss snd-ymfpci
snd-pcm snd-opl3-lib snd-timer snd-hwdep snd-mpu401-uart snd-rawmidi
snd-seq-device snd-ac97-codec]
usb-uhci               23340   0  (unused)
hid                    14216   0  (unused)
input                   3520   0  [joydev usbmouse mousedev keybdev hid]
ide-cd                 30532   0
loop                    9528   0  (unused)
sg                     28364   0
sr_mod                 15960   0
ide-scsi                8848   0
cdrom                  29248   0  [ide-cd sr_mod]
scsi_mod               56916   4  [usb-storage sd_mod sg sr_mod
ide-scsi]
tuner                  10240   1  (autoclean)
tvaudio                12796   0  (autoclean) (unused)
bttv                   69504   0
soundcore               3812   7  [snd bttv]
i2c-algo-bit            7656   1  [bttv]
8139too                14888   1

nirvana:# uname -a
Linux nirvana 2.4.20-xfs-rmap15d #1 Thu Feb 6 01:06:41 NZDT 2003 i686
unknown unknown GNU/Linux

-- 
mdew <mdew@mdew.dyndns.org>



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Stv0680-usb-general mailing list
Stv0680-usb-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/stv0680-usb-general


             reply	other threads:[~2003-03-03  4:12 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-03-03  4:22 mdew [this message]
2003-03-03  4:55 ` Fwd: Stv0680-usb-general] USB error? Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1046665376.15584.29.camel@nirvana.flat \
    --to=mdew@mdew.dyndns.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.