From mboxrd@z Thu Jan 1 00:00:00 1970 From: Justin Cormack Subject: Re: NEW hdsp 9652 problems - {WAS: alsaconf -L - where's Waldo?) Date: 21 Mar 2003 16:39:07 +0000 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1048264752.1305.6.camel@lotte> References: <1048254648.3400.24.camel@Wizard> <1048263429.8624.23.camel@Wizard> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1048263429.8624.23.camel@Wizard> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Mark Knecht Cc: Takashi Iwai , Alsa-Devel List-Id: alsa-devel@alsa-project.org On Fri, 2003-03-21 at 16:17, Mark Knecht wrote: > Takashi, > I have two sound devices (on-board Via device and an RME HDSP 9652) > but I only want to configure the RME. Currently alsaconf finds the RME, > attempts to install the drivers, and then the drivers fail saying they > cannot find the cards. I had hoped that possibly the log file would give > me more information on why. I suppose it will not if it's only for ISA > devices. (BTW - alsaconf does find this Via chip and can configure it > correctly.) You need a more recent version of the driver, probably the cvs version for this card. The configurator probably checks the PCI id but not the revision nuumber. ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en