From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Knecht Subject: Re: NEW hdsp 9652 problems - {WAS: alsaconf -L - where's Waldo?) Date: 21 Mar 2003 09:40:59 -0800 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1048268460.11156.12.camel@Wizard> References: <1048254648.3400.24.camel@Wizard> <1048263429.8624.23.camel@Wizard> <1048264752.1305.6.camel@lotte> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1048264752.1305.6.camel@lotte> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Justin Cormack Cc: Alsa-Devel List-Id: alsa-devel@alsa-project.org On Fri, 2003-03-21 at 08:39, Justin Cormack wrote: > On Fri, 2003-03-21 at 16:17, Mark Knecht wrote: > > Takashi, > > I have two sound devices (on-board Via device and an RME HDSP 9652) > > but I only want to configure the RME. Currently alsaconf finds the RME, > > attempts to install the drivers, and then the drivers fail saying they > > cannot find the cards. I had hoped that possibly the log file would give > > me more information on why. I suppose it will not if it's only for ISA > > devices. (BTW - alsaconf does find this Via chip and can configure it > > correctly.) > > You need a more recent version of the driver, probably the cvs version > for this card. The configurator probably checks the PCI id but not the > revision nuumber. Justin, Thanks for the reply. It makes sense to me, however, since I use the PlanetCCRMA flow, and alsa is supplied as an RPM, I have no way (that I know of) to just get a new driver, compile it and try it out. I need a new RPM, I think. Thanks for the ideas! Cheers, Mark ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en