From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-raid@vger.kernel.org
Subject: [PATCH md 018 of 20] Allow available size of component devices to be set via sysfs.
Date: Mon, 12 Dec 2005 14:15:48 +1100 [thread overview]
Message-ID: <1051212031548.5212@suse.de> (raw)
In-Reply-To: 20051212135705.4561.patches@notabene
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./Documentation/md.txt | 7 +++++++
./drivers/md/md.c | 25 +++++++++++++++++++++++++
2 files changed, 32 insertions(+)
diff ./Documentation/md.txt~current~ ./Documentation/md.txt
--- ./Documentation/md.txt~current~ 2005-12-12 11:37:32.000000000 +1100
+++ ./Documentation/md.txt 2005-12-12 11:38:02.000000000 +1100
@@ -250,6 +250,13 @@ Each directory contains:
the device before this offset us not touched, unless it is
used for storing metadata (Formats 1.1 and 1.2).
+ size
+ The amount of the device, after the offset, that can be used
+ for storage of data. This will normally be the same as the
+ component_size. This can be written while assembling an
+ array. If a value less than the current component_size is
+ written, component_size will be reduced to this value.
+
An active md device will also contain and entry for each active device
in the array. These are named
diff ./drivers/md/md.c~current~ ./drivers/md/md.c
--- ./drivers/md/md.c~current~ 2005-12-12 11:37:48.000000000 +1100
+++ ./drivers/md/md.c 2005-12-12 11:38:30.000000000 +1100
@@ -1686,12 +1686,37 @@ offset_store(mdk_rdev_t *rdev, const cha
static struct rdev_sysfs_entry rdev_offset =
__ATTR(offset, 0644, offset_show, offset_store);
+static ssize_t
+rdev_size_show(mdk_rdev_t *rdev, char *page)
+{
+ return sprintf(page, "%llu\n", rdev->size);
+}
+
+static ssize_t
+rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len)
+{
+ char *e;
+ unsigned long long size = simple_strtoull(buf, &e, 10);
+ if (e==buf || (*e && *e != '\n'))
+ return -EINVAL;
+ if (rdev->mddev->pers)
+ return -EBUSY;
+ rdev->size = size;
+ if (size < rdev->mddev->size || rdev->mddev->size == 0)
+ rdev->mddev->size = size;
+ return len;
+}
+
+static struct rdev_sysfs_entry rdev_size =
+__ATTR(size, 0644, rdev_size_show, rdev_size_store);
+
static struct attribute *rdev_default_attrs[] = {
&rdev_state.attr,
&rdev_super.attr,
&rdev_errors.attr,
&rdev_slot.attr,
&rdev_offset.attr,
+ &rdev_size.attr,
NULL,
};
static ssize_t
next prev parent reply other threads:[~2005-12-12 3:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-12 3:10 [PATCH md 000 of 20] Introduction NeilBrown
2005-12-12 3:10 ` [PATCH md 001 of 20] Fix a use-after-free bug in raid1 NeilBrown
2005-12-12 3:10 ` [PATCH md 002 of 20] Use correct size of raid5 stripe cache when measuring how full it is NeilBrown
2005-12-12 3:10 ` [PATCH md 003 of 20] Define and use safe_put_page for md NeilBrown
2005-12-12 3:13 ` [PATCH md 004 of 20] Helper function to match commands written to sysfs files NeilBrown
2005-12-12 3:14 ` [PATCH md 005 of 20] Fix typo in comment NeilBrown
2005-12-12 3:14 ` [PATCH md 006 of 20] Make a couple of names in md.c static NeilBrown
2005-12-12 3:14 ` [PATCH md 007 of 20] Make sure bitmap updates are visible through filesystem NeilBrown
2005-12-12 3:14 ` [PATCH md 008 of 20] Fix rdev->pending counts in raid1 NeilBrown
2005-12-12 3:14 ` [PATCH md 009 of 20] Allow chunk_size to be settable through sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 010 of 20] Allow md array component size to be accessed and set via sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 011 of 20] Expose md metadata format in sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 012 of 20] Allow array level to be set textually via sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 013 of 20] Count corrected read errors per drive NeilBrown
2005-12-12 10:07 ` Andrew Morton
2005-12-12 3:15 ` [PATCH md 014 of 20] Allow md/raid_disks to be settable NeilBrown
2005-12-12 3:15 ` [PATCH md 015 of 20] Keep better track of dev/array size when assembling md arrays NeilBrown
2005-12-12 3:15 ` [PATCH md 016 of 20] Expose device slot information via sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 017 of 20] Export rdev->data_offset " NeilBrown
2005-12-12 3:15 ` NeilBrown [this message]
2005-12-12 3:15 ` [PATCH md 019 of 20] Support adding new devices to md arrays " NeilBrown
2005-12-12 3:15 ` [PATCH md 020 of 20] Allow sync-speed to be controlled per-device NeilBrown
2005-12-12 11:30 ` Jeff Breidenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1051212031548.5212@suse.de \
--to=neilb@suse.de \
--cc=akpm@osdl.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.