From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: Re: Antwort: Re: [linux-lvm] MultiPath From: Ryan Frank In-Reply-To: References: Content-Transfer-Encoding: 7bit Message-Id: <1053696372.1216.92.camel@prvpcompq249.css.twable.com> Mime-Version: 1.0 Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Fri May 23 08:22:02 2003 List-Id: Content-Type: text/plain; charset="us-ascii" To: LVM List On Fri, 2003-05-23 at 00:41, Dietmar Stein wrote: > Hi > > Follow documentation / sample raidtab for multipathing, which comes with > raidtools. If you've done that, both paths should be used (we have tested > this once and it was working, also the failover of the active path). > > Otherwise I would say there's a misconfiguration. > > Dietmar Thats where I am now, I followed the docs, and even tried a couple things I found using google... However, it doesn't seem to like the second path. If I cat /proc/mdstat it shows two paths... But If I write to the volume's I only see one path of activity... If I pull that line, the write stops... Weird... I will keep working it.. -- +----------------------------------------------------+ |Ryan Frank Unix System Administrator | |Time Warner Cable 7910 Crescent Executive Dr.| |(704) 731-3324 - phone 3rd Floor | |(704) 731-1180 - fax Charlotte, NC 28217 | |150*143328*1 - nextel ryan.frank@twcable.com | +----------------------------------------------------+