From: "David E. Storey" <dave@tamos.net>
To: alsa <alsa-devel@lists.sourceforge.net>
Subject: Re: still losing with hdsp (me too)
Date: 04 Jun 2003 13:55:05 -0400 [thread overview]
Message-ID: <1054749305.443.12.camel@localhost> (raw)
In-Reply-To: <200306031413.13936.Jaakko.Prattala@Helsinki.FI>
[-- Attachment #1: Type: text/plain, Size: 2017 bytes --]
I'm also having problems with the hdsp driver, however, I can get my
multiface + PCMCIA card working just fine so long as I boot XP first. XP
will load the firmware and when I reboot into linux and do a "modprobe
snd-hdsp", it loads up just fine and states that the firmware has
already been initialized. If I don't boot into XP first...
(root@scorpius root)# lspci -vvv -s 07:00
07:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
DSP (rev 0b)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 21000000 (32-bit, non-prefetchable)
[size=64K]
(root@scorpius root)# modprobe snd-hdsp
(root@scorpius root)# dmesg
[snip]
cs: cb_alloc(bus 7): vendor 0x10ee, device 0x3fc5
PCI: Enabling device 07:00.0 (0080 -> 0082)
Hammerfall memory allocator: buffers allocated for 1 cards
PCI: Setting latency timer of device 07:00.0 to 64
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:4107: card initialization
pending : waiting for firmware
(root@scorpius root)# hdsploader
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : Intel 82801CA-ICH3 at 0x1c00, irq 9
Card 1 : RME Hammerfall DSP at 0x21000000, irq 9
Upload firmware for card hw:1
Hwdep ioctl error on card hw:1 : Input/output error.
(root@scorpius root)# dmesg
[snip]
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:4107: card initialization
pending : waiting for firmware
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:644: wait for FIFO status <= 0
failed after 30 iterations
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:3803: initializing firmware
upload
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:508: Hammerfall-DSP: no
Digiface or Multiface connected!
While the XP boot-up is annoying, the driver works fine otherwise.
d!
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
prev parent reply other threads:[~2003-06-04 17:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-02 22:46 still losing with hdsp jfm3
2003-06-03 11:13 ` still losing with hdsp (me too) Jaakko Prättälä
2003-06-03 16:19 ` Mark Knecht
2003-06-04 17:55 ` David E. Storey [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1054749305.443.12.camel@localhost \
--to=dave@tamos.net \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.