Re: xircom card bus with 2.4.21 link trouble (was: xircom card bus with 2.4.20 link trouble)

[Arnaud Ligot <spyroux@freegates.be>]

/me auto slaps 

with the 2.4.20, it work but it don't work with 2.4.21.
Sorry

Le ven 20/06/2003 à 11:26, Arnaud Ligot a écrit :
> Hello,
> 
> Since I run the 2.4.21 kernel (+bootsplash patch), (I didn't try without
> this patch but I think it is not the problem), my Xircom Cardbus don't
> work any more! In fact, I put the card into the pcmcia slot, the pc
> detect it, load the correct module (xirc2ps_cb), start eth1 but the led
> link (both side) blinks.
> I have try with a hub 10, a ethernet card 10 and an ethernet card
> 10/100. I have so try 2 cables... but same problem.
> I have try to impose the ethernet type of link mii-tool -A10BaseT-HD and
> -F10BaseT-HD.
> 
> Thanks
> 
> Arnaud
> 
> extract of /var/messages (10mbps):
> ------
> Jun 20 08:34:49 portable kernel: cs: memory probe 0xa0000000-0xa0ffffff:
> clean.
> Jun 20 08:34:49 portable kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55
> (dd9jn+kvh)
> Jun 20 08:34:53 portable kernel: eth1: autonegotiation failed; using
> 10mbs
> Jun 20 08:34:53 portable kernel: eth1: MII selected
> Jun 20 08:34:53 portable kernel: eth1: media 10BaseT, silicon revision 0
> Jun 20 08:34:53 portable kernel: eth1: Xircom: port 0x300, irq 3, hwaddr
> 00:80:C7:CC:1F:A
> 2
> Jun 20 08:34:54 portable kernel: eth1: autonegotiation failed; using
> 10mbs
> Jun 20 08:34:54 portable kernel: eth1: MII selected
> Jun 20 08:34:54 portable kernel: eth1: media 10BaseT, silicon revision 0
> Jun 20 08:34:59 portable kernel: eth1: autonegotiation failed; using
> 10mbs
> Jun 20 08:34:59 portable kernel: eth1: MII selected
> ....
> -----
> 
> short extract of /var/messages (100mbps):
> -----
> Jun 20 10:14:52 portable kernel: eth1: MII link partner: 05e1
> Jun 20 10:14:52 portable kernel: eth1: MII selected
> Jun 20 10:14:52 portable kernel: eth1: media 100BaseT, silicon revision
> 5
> -----
> 
> ----
-- 
Arnaud Ligot <spyroux@freegates.be>