From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org, pcihpd-discuss@lists.sourceforge.net
Subject: Re: [PATCH] More PCI fixes for 2.5.73
Date: Wed, 25 Jun 2003 17:48:15 -0700 [thread overview]
Message-ID: <10565884951291@kroah.com> (raw)
In-Reply-To: <10565884952122@kroah.com>
ChangeSet 1.1429.2.7, 2003/06/25 17:16:12-07:00, greg@kroah.com
[PATCH] IBM PCI Hotplug: fixes found by sparse
drivers/pci/hotplug/ibmphp_hpc.c | 61 +++++++++++++++++++--------------------
drivers/pci/hotplug/ibmphp_res.c | 4 +-
2 files changed, 32 insertions(+), 33 deletions(-)
diff -Nru a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
--- a/drivers/pci/hotplug/ibmphp_hpc.c Wed Jun 25 17:37:49 2003
+++ b/drivers/pci/hotplug/ibmphp_hpc.c Wed Jun 25 17:37:49 2003
@@ -152,11 +152,11 @@
u8 status;
int i;
void *wpg_addr; // base addr + offset
- ulong wpg_data, // data to/from WPG LOHI format
- ultemp, data; // actual data HILO format
+ unsigned long wpg_data; // data to/from WPG LOHI format
+ unsigned long ultemp;
+ unsigned long data; // actual data HILO format
-
- debug_polling ("%s - Entry WPGBbar[%lx] index[%x] \n", __FUNCTION__, (ulong) WPGBbar, index);
+ debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __FUNCTION__, WPGBbar, index);
//--------------------------------------------------------------------
// READ - step 1
@@ -165,17 +165,17 @@
if (ctlr_ptr->ctlr_type == 0x02) {
data = WPG_READATADDR_MASK;
// fill in I2C address
- ultemp = (ulong) ctlr_ptr->u.wpeg_ctlr.i2c_addr;
+ ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
ultemp = ultemp >> 1;
data |= (ultemp << 8);
// fill in index
- data |= (ulong) index;
+ data |= (unsigned long)index;
} else if (ctlr_ptr->ctlr_type == 0x04) {
data = WPG_READDIRECT_MASK;
// fill in index
- ultemp = (ulong) index;
+ ultemp = (unsigned long)index;
ultemp = ultemp << 8;
data |= ultemp;
} else {
@@ -184,14 +184,14 @@
}
wpg_data = swab32 (data); // swap data before writing
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMOSUP_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
writel (wpg_data, wpg_addr);
//--------------------------------------------------------------------
// READ - step 2 : clear the message buffer
data = 0x00000000;
wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMBUFL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
writel (wpg_data, wpg_addr);
//--------------------------------------------------------------------
@@ -199,7 +199,7 @@
// 2020 : [20] OR operation at [20] offset 0x20
data = WPG_I2CMCNTL_STARTOP_MASK;
wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET + (ulong) WPG_I2C_OR;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
writel (wpg_data, wpg_addr);
//--------------------------------------------------------------------
@@ -207,7 +207,7 @@
i = CMD_COMPLETE_TOUT_SEC;
while (i) {
long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
wpg_data = readl (wpg_addr);
data = swab32 (wpg_data);
if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
@@ -223,7 +223,7 @@
i = CMD_COMPLETE_TOUT_SEC;
while (i) {
long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CSTAT_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
wpg_data = readl (wpg_addr);
data = swab32 (wpg_data);
if (HPC_I2CSTATUS_CHECK (data))
@@ -237,7 +237,7 @@
//--------------------------------------------------------------------
// READ - step 6 : get DATA
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMBUFL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
wpg_data = readl (wpg_addr);
data = swab32 (wpg_data);
@@ -259,12 +259,12 @@
{
u8 rc;
void *wpg_addr; // base addr + offset
- ulong wpg_data, // data to/from WPG LOHI format
- ultemp, data; // actual data HILO format
+ unsigned long wpg_data; // data to/from WPG LOHI format
+ unsigned long ultemp;
+ unsigned long data; // actual data HILO format
int i;
-
- debug_polling ("%s - Entry WPGBbar[%lx] index[%x] cmd[%x]\n", __FUNCTION__, (ulong) WPGBbar, index, cmd);
+ debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __FUNCTION__, WPGBbar, index, cmd);
rc = 0;
//--------------------------------------------------------------------
@@ -276,17 +276,17 @@
if (ctlr_ptr->ctlr_type == 0x02) {
data = WPG_WRITEATADDR_MASK;
// fill in I2C address
- ultemp = (ulong) ctlr_ptr->u.wpeg_ctlr.i2c_addr;
+ ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
ultemp = ultemp >> 1;
data |= (ultemp << 8);
// fill in index
- data |= (ulong) index;
+ data |= (unsigned long)index;
} else if (ctlr_ptr->ctlr_type == 0x04) {
data = WPG_WRITEDIRECT_MASK;
// fill in index
- ultemp = (ulong) index;
+ ultemp = (unsigned long)index;
ultemp = ultemp << 8;
data |= ultemp;
} else {
@@ -295,14 +295,14 @@
}
wpg_data = swab32 (data); // swap data before writing
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMOSUP_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
writel (wpg_data, wpg_addr);
//--------------------------------------------------------------------
// WRITE - step 2 : clear the message buffer
- data = 0x00000000 | (ulong) cmd;
+ data = 0x00000000 | (unsigned long)cmd;
wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMBUFL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
writel (wpg_data, wpg_addr);
//--------------------------------------------------------------------
@@ -310,7 +310,7 @@
// 2020 : [20] OR operation at [20] offset 0x20
data = WPG_I2CMCNTL_STARTOP_MASK;
wpg_data = swab32 (data);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET + (ulong) WPG_I2C_OR;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
writel (wpg_data, wpg_addr);
//--------------------------------------------------------------------
@@ -318,7 +318,7 @@
i = CMD_COMPLETE_TOUT_SEC;
while (i) {
long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CMCNTL_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
wpg_data = readl (wpg_addr);
data = swab32 (wpg_data);
if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
@@ -335,7 +335,7 @@
i = CMD_COMPLETE_TOUT_SEC;
while (i) {
long_delay (1 * HZ / 100);
- (ulong) wpg_addr = (ulong) WPGBbar + (ulong) WPG_I2CSTAT_OFFSET;
+ wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
wpg_data = readl (wpg_addr);
data = swab32 (wpg_data);
if (HPC_I2CSTATUS_CHECK (data))
@@ -543,7 +543,7 @@
int rc = 0;
int busindex;
- debug_polling ("%s - Entry pslot[%lx] cmd[%x] pstatus[%lx]\n", __FUNCTION__, (ulong) pslot, cmd, (ulong) pstatus);
+ debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __FUNCTION__, pslot, cmd, pstatus);
if ((pslot == NULL)
|| ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
@@ -683,7 +683,7 @@
int rc = 0;
int timeout;
- debug_polling ("%s - Entry pslot[%lx] cmd[%x]\n", __FUNCTION__, (ulong) pslot, cmd);
+ debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __FUNCTION__, pslot, cmd);
if (pslot == NULL) {
rc = -EINVAL;
err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
@@ -976,7 +976,7 @@
{
int rc = 0;
- debug ("%s - Entry pslot[%lx]\n", __FUNCTION__, (ulong) pslot);
+ debug ("%s - Entry pslot[%p]\n", __FUNCTION__, pslot);
rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
debug ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
return rc;
@@ -1004,8 +1004,7 @@
u8 disable = FALSE;
u8 update = FALSE;
- debug ("process_changeinstatus - Entry pslot[%lx], poldslot[%lx]\n", (ulong) pslot,
- (ulong) poldslot);
+ debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
// bit 0 - HPC_SLOT_POWER
if ((pslot->status & 0x01) != (poldslot->status & 0x01))
diff -Nru a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c
--- a/drivers/pci/hotplug/ibmphp_res.c Wed Jun 25 17:37:49 2003
+++ b/drivers/pci/hotplug/ibmphp_res.c Wed Jun 25 17:37:49 2003
@@ -42,7 +42,7 @@
static int update_bridge_ranges (struct bus_node **);
static int add_range (int type, struct range_node *, struct bus_node *);
static void fix_resources (struct bus_node *);
-static inline struct bus_node *find_bus_wprev (u8, struct bus_node **, u8);
+static struct bus_node *find_bus_wprev (u8, struct bus_node **, u8);
static LIST_HEAD(gbuses);
LIST_HEAD(ibmphp_res_head);
@@ -1757,7 +1757,7 @@
return find_bus_wprev (bus_number, NULL, 0);
}
-static inline struct bus_node *find_bus_wprev (u8 bus_number, struct bus_node **prev, u8 flag)
+static struct bus_node *find_bus_wprev (u8 bus_number, struct bus_node **prev, u8 flag)
{
struct bus_node *bus_cur;
struct list_head *tmp;
next prev parent reply other threads:[~2003-06-26 0:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-26 0:45 [BK PATCH] More PCI fixes for 2.5.73 Greg KH
2003-06-26 0:48 ` [PATCH] " Greg KH
2003-06-26 0:48 ` Greg KH
2003-06-26 0:48 ` Greg KH
2003-06-26 0:48 ` Greg KH
2003-06-26 0:48 ` Greg KH
2003-06-26 0:48 ` Greg KH
2003-06-26 0:48 ` Greg KH [this message]
2003-06-26 0:48 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10565884951291@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pcihpd-discuss@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.