From: "Ramón Rey Vicente" <ramon.rey@hispalinux.es>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [v2.6.0-test2] hda: dma_timer_expiry: dma status == 0x60
Date: 29 Jul 2003 15:50:16 +0200 [thread overview]
Message-ID: <1059486614.12370.8.camel@debian> (raw)
[-- Attachment #1: Type: text/plain, Size: 4422 bytes --]
Hi
Using hdparm with this options
hdparm -k1 -d1 -u1 -c1 -a8 -m16 -X udma2 /dev/hda
I obtain this
blk: queue c02fb11c, I/O limit 4095Mb (mask 0xffffffff)
hda: channel busy
hda: dma_timer_expiry: dma status == 0x60
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
hdb: DMA disabled
hda: no DRQ after issuing MULTWRITE
ide0: reset: success
blk: queue c02fb11c, I/O limit 4095Mb (mask 0xffffffff)
hda: CHECK for good STATUS
Some information of my system
Linux debian 2.6.0-test2 #2 Sun Jul 27 21:18:34 CEST 2003 i586 GNU/Linux
Gnu C 3.3.1
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.34
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.11
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded r128 snd_seq_midi snd_seq_oss snd_seq_midi_event
snd_seq snd_pcm_oss snd_mixer_oss snd_ens1371 snd_rawmidi snd_seq_device
snd_pcm snd_page_alloc snd_timer snd_ac97_codec snd ipt_REDIRECT
iptable_nat ipt_state ip_conntrack iptable_filter ip_tables uhci_hcd
usbcore 8139too mii crc32 ide_cd cdrom
And my hardware
cat /proc/via:
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.37
South Bridge: VIA vt82c586b
Revision: ISA 0x47 IDE 0x6
Highest DMA rate: UDMA33
BM-DMA base: 0xe000
PCI clock: 33.3MHz
Master Read Cycle IRDY: 1ws
Master Write Cycle IRDY: 1ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes yes
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 40w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA PIO DMA UDMA
Address Setup: 30ns 30ns 30ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 90ns
Data Recovery: 30ns 30ns 30ns 30ns
Cycle Time: 60ns 120ns 120ns 60ns
Transfer Rate: 33.3MB/s 16.6MB/s 16.6MB/s 33.3MB/s
Processor
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 451.191
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow
k6_mtrr
bogomips : 888.83
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-40ff : VIA Technologies, In VT82C586B ACPI
d000-dfff : PCI Bus #01
d000-d0ff : ATI Technologies Inc Rage 128 PF/PRO AGP
e000-e00f : VIA Technologies, In VT82C586/B/686A/B PI
e000-e007 : ide0
e008-e00f : ide1
e400-e41f : VIA Technologies, In USB
e400-e41f : uhci-hcd
e800-e8ff : Realtek Semiconducto RTL-8139/8139C/8139C
e800-e8ff : 8139too
ec00-ec3f : Ensoniq ES1371 [AudioPCI-97]
ec00-ec3f : Ensoniq AudioPCI
--
Ramón Rey Vicente <ramon dot rey at hispalinux dot es>
jabber ID <rreylinux at jabber dot org>
------------------------------------------------------------
gpg public key ID 0xBEBD71D5 # http://pgp.escomposlinux.org/
[-- Attachment #2: Esta parte del mensaje está firmada digitalmente --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2003-07-29 13:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1059486614.12370.8.camel@debian \
--to=ramon.rey@hispalinux.es \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.