From: Rusty Lynch <rusty@linux.co.intel.com>
To: Philip Edelbrock <phil@netroedge.com>, Frodo Looijaard <frodol@dds.nl>
Cc: lkml <linux-kernel@vger.kernel.org>
Subject: [PATCH][2.6.0-test2]adm1021 i2c driver bug fix
Date: 06 Aug 2003 13:17:55 -0700 [thread overview]
Message-ID: <1060201075.3854.15.camel@vmhack> (raw)
While initializing the adm1021 device, the driver is performing a conversion
from fixed point to Celcius on values that were declaired as Celcius. On
my Dell Precision 220 this results in a shutdown after a couple of minutes
running.
This patch was made against the 2.6.0-test2 tree, and just removes the
conversion.
--rustyl
--- drivers/i2c/chips/adm1021.c.orig 2003-08-06 13:04:25.000000000 -0700
+++ drivers/i2c/chips/adm1021.c 2003-08-06 13:09:43.000000000 -0700
@@ -356,13 +356,13 @@
{
/* Initialize the adm1021 chip */
adm1021_write_value(client, ADM1021_REG_TOS_W,
- TEMP_TO_REG(adm1021_INIT_TOS));
+ adm1021_INIT_TOS);
adm1021_write_value(client, ADM1021_REG_THYST_W,
- TEMP_TO_REG(adm1021_INIT_THYST));
+ adm1021_INIT_THYST);
adm1021_write_value(client, ADM1021_REG_REMOTE_TOS_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_TOS));
+ adm1021_INIT_REMOTE_TOS);
adm1021_write_value(client, ADM1021_REG_REMOTE_THYST_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_THYST));
+ adm1021_INIT_REMOTE_THYST);
/* Enable ADC and disable suspend mode */
adm1021_write_value(client, ADM1021_REG_CONFIG_W, 0);
/* Set Conversion rate to 1/sec (this can be tinkered with) */
reply other threads:[~2003-08-06 20:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1060201075.3854.15.camel@vmhack \
--to=rusty@linux.co.intel.com \
--cc=frodol@dds.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=phil@netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.