All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jocelyn Mayer <l_indien@magic.fr>
To: Greg KH <greg@kroah.com>
Cc: Dave Jones <davej@redhat.com>,
	linux kernel <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.0-test2 does not boot with matroxfb
Date: 11 Aug 2003 20:55:45 +0200	[thread overview]
Message-ID: <1060628145.29139.164.camel@jma1.dev.netgem.com> (raw)
In-Reply-To: <20030811181414.GB17442@kroah.com>

On Mon, 2003-08-11 at 20:14, Greg KH wrote:
> On Mon, Aug 11, 2003 at 07:07:03PM +0100, Dave Jones wrote:
> > On Mon, Aug 11, 2003 at 08:01:06PM +0200, Jocelyn Mayer wrote:
> >  > I played with my PC this week-end.
> >  > First I recompiled XFree up to version 4.3.0. It fixed nothing.
> >  > I found out that the agpgart/dri drivers failed to init:
> >  > Linux agpgart interface v0.100 (c) Dave Jones
> > 
> > Did you also compile in any of the AGP chipset drivers?
> > You should see another AGP line following the above message.
> > If you built them as modules, make sure you put amd-k7-agp or the like
> > in your /etc/modules to make sure it gets loaded.
> > 
Here's the agpgart config I used:
all is in the kernel, nothing in a module....

dules in the kernel, not in modules,
as I used to do in 2.4 kernel, which works well for me
The configuration I tested was (from my .config file):
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_MGA=y

> > Greg, I'm getting quite a few mails which has been people getting
> > bitten by this. We discussed this briefly at OLS, what's the missing
> > piece of the puzzle here, hotplug userspace scripts iirc ?
> 
> Yeah, putting a /sbin/hotplug and the agp modules in initramfs so that
> when the pci device is found during boot, the module will be loaded.  I
> think you might be able to do this with initrd too.
> 
> But in reality, it's a user config error :)
> 
I guess not, as I don't use modules (and don't want to) for this feature
andI don't use any initrd (and never want too)...


> thanks,
> 
> greg k-h
What am I missing here ?

Regards.

-- 
Jocelyn Mayer <l_indien@magic.fr>


  reply	other threads:[~2003-08-11 19:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-08-09 11:40 2.6.0-test2 does not boot with matroxfb Jocelyn Mayer
2003-08-11 18:01 ` Jocelyn Mayer
2003-08-11 18:07   ` Dave Jones
2003-08-11 18:14     ` Greg KH
2003-08-11 18:55       ` Jocelyn Mayer [this message]
2003-08-11 18:56         ` Dave Jones
2003-08-11 19:10           ` Jocelyn Mayer
  -- strict thread matches above, loose matches on Subject: below --
2003-08-14 23:14 rwhron
2003-08-11 19:14 Petr Vandrovec
2003-08-11 18:29 Petr Vandrovec
2003-08-11 19:00 ` Jocelyn Mayer
2003-08-09 21:07 Juergen Rose
2003-08-08 16:16 Petr Vandrovec
2003-08-08 15:45 Juergen Rose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1060628145.29139.164.camel@jma1.dev.netgem.com \
    --to=l_indien@magic.fr \
    --cc=davej@redhat.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.