From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 004 of 9] md: Factor out part of raid10d into a separate function.
Date: Mon, 31 Jul 2006 17:32:08 +1000 [thread overview]
Message-ID: <1060731073208.24470@suse.de> (raw)
In-Reply-To: 20060731172842.24323.patches@notabene
raid10d has toooo many nested block, so take the fix_read_error
functionality out into a separate function.
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/raid10.c | 213 ++++++++++++++++++++++++++------------------------
1 file changed, 115 insertions(+), 98 deletions(-)
diff .prev/drivers/md/raid10.c ./drivers/md/raid10.c
--- .prev/drivers/md/raid10.c 2006-07-31 17:23:57.000000000 +1000
+++ ./drivers/md/raid10.c 2006-07-31 17:24:34.000000000 +1000
@@ -1350,9 +1350,119 @@ static void recovery_request_write(mddev
*
* 1. Retries failed read operations on working mirrors.
* 2. Updates the raid superblock when problems encounter.
- * 3. Performs writes following reads for array syncronising.
+ * 3. Performs writes following reads for array synchronising.
*/
+static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
+{
+ int sect = 0; /* Offset from r10_bio->sector */
+ int sectors = r10_bio->sectors;
+ mdk_rdev_t*rdev;
+ while(sectors) {
+ int s = sectors;
+ int sl = r10_bio->read_slot;
+ int success = 0;
+ int start;
+
+ if (s > (PAGE_SIZE>>9))
+ s = PAGE_SIZE >> 9;
+
+ rcu_read_lock();
+ do {
+ int d = r10_bio->devs[sl].devnum;
+ rdev = rcu_dereference(conf->mirrors[d].rdev);
+ if (rdev &&
+ test_bit(In_sync, &rdev->flags)) {
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ success = sync_page_io(rdev->bdev,
+ r10_bio->devs[sl].addr +
+ sect + rdev->data_offset,
+ s<<9,
+ conf->tmppage, READ);
+ rdev_dec_pending(rdev, mddev);
+ rcu_read_lock();
+ if (success)
+ break;
+ }
+ sl++;
+ if (sl == conf->copies)
+ sl = 0;
+ } while (!success && sl != r10_bio->read_slot);
+ rcu_read_unlock();
+
+ if (!success) {
+ /* Cannot read from anywhere -- bye bye array */
+ int dn = r10_bio->devs[r10_bio->read_slot].devnum;
+ md_error(mddev, conf->mirrors[dn].rdev);
+ break;
+ }
+
+ start = sl;
+ /* write it back and re-read */
+ rcu_read_lock();
+ while (sl != r10_bio->read_slot) {
+ int d;
+ if (sl==0)
+ sl = conf->copies;
+ sl--;
+ d = r10_bio->devs[sl].devnum;
+ rdev = rcu_dereference(conf->mirrors[d].rdev);
+ if (rdev &&
+ test_bit(In_sync, &rdev->flags)) {
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ atomic_add(s, &rdev->corrected_errors);
+ if (sync_page_io(rdev->bdev,
+ r10_bio->devs[sl].addr +
+ sect + rdev->data_offset,
+ s<<9, conf->tmppage, WRITE)
+ == 0)
+ /* Well, this device is dead */
+ md_error(mddev, rdev);
+ rdev_dec_pending(rdev, mddev);
+ rcu_read_lock();
+ }
+ }
+ sl = start;
+ while (sl != r10_bio->read_slot) {
+ int d;
+ if (sl==0)
+ sl = conf->copies;
+ sl--;
+ d = r10_bio->devs[sl].devnum;
+ rdev = rcu_dereference(conf->mirrors[d].rdev);
+ if (rdev &&
+ test_bit(In_sync, &rdev->flags)) {
+ char b[BDEVNAME_SIZE];
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ if (sync_page_io(rdev->bdev,
+ r10_bio->devs[sl].addr +
+ sect + rdev->data_offset,
+ s<<9, conf->tmppage, READ) == 0)
+ /* Well, this device is dead */
+ md_error(mddev, rdev);
+ else
+ printk(KERN_INFO
+ "raid10:%s: read error corrected"
+ " (%d sectors at %llu on %s)\n",
+ mdname(mddev), s,
+ (unsigned long long)sect+
+ rdev->data_offset,
+ bdevname(rdev->bdev, b));
+
+ rdev_dec_pending(rdev, mddev);
+ rcu_read_lock();
+ }
+ }
+ rcu_read_unlock();
+
+ sectors -= s;
+ sect += s;
+ }
+}
+
static void raid10d(mddev_t *mddev)
{
r10bio_t *r10_bio;
@@ -1413,105 +1523,12 @@ static void raid10d(mddev_t *mddev)
* This is all done synchronously while the array is
* frozen.
*/
- int sect = 0; /* Offset from r10_bio->sector */
- int sectors = r10_bio->sectors;
- freeze_array(conf);
- if (mddev->ro == 0) while(sectors) {
- int s = sectors;
- int sl = r10_bio->read_slot;
- int success = 0;
-
- if (s > (PAGE_SIZE>>9))
- s = PAGE_SIZE >> 9;
-
- rcu_read_lock();
- do {
- int d = r10_bio->devs[sl].devnum;
- rdev = rcu_dereference(conf->mirrors[d].rdev);
- if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- success = sync_page_io(rdev->bdev,
- r10_bio->devs[sl].addr +
- sect + rdev->data_offset,
- s<<9,
- conf->tmppage, READ);
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- if (success)
- break;
- }
- sl++;
- if (sl == conf->copies)
- sl = 0;
- } while (!success && sl != r10_bio->read_slot);
- rcu_read_unlock();
-
- if (success) {
- int start = sl;
- /* write it back and re-read */
- rcu_read_lock();
- while (sl != r10_bio->read_slot) {
- int d;
- if (sl==0)
- sl = conf->copies;
- sl--;
- d = r10_bio->devs[sl].devnum;
- rdev = rcu_dereference(conf->mirrors[d].rdev);
- if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- atomic_add(s, &rdev->corrected_errors);
- if (sync_page_io(rdev->bdev,
- r10_bio->devs[sl].addr +
- sect + rdev->data_offset,
- s<<9, conf->tmppage, WRITE) == 0)
- /* Well, this device is dead */
- md_error(mddev, rdev);
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- }
- }
- sl = start;
- while (sl != r10_bio->read_slot) {
- int d;
- if (sl==0)
- sl = conf->copies;
- sl--;
- d = r10_bio->devs[sl].devnum;
- rdev = rcu_dereference(conf->mirrors[d].rdev);
- if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- if (sync_page_io(rdev->bdev,
- r10_bio->devs[sl].addr +
- sect + rdev->data_offset,
- s<<9, conf->tmppage, READ) == 0)
- /* Well, this device is dead */
- md_error(mddev, rdev);
- else
- printk(KERN_INFO "raid10:%s: read error corrected (%d sectors at %llu on %s)\n",
- mdname(mddev), s, (unsigned long long)(sect+rdev->data_offset), bdevname(rdev->bdev, b));
-
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- }
- }
- rcu_read_unlock();
- } else {
- /* Cannot read from anywhere -- bye bye array */
- md_error(mddev, conf->mirrors[r10_bio->devs[r10_bio->read_slot].devnum].rdev);
- break;
- }
- sectors -= s;
- sect += s;
+ if (mddev->ro == 0) {
+ freeze_array(conf);
+ fix_read_error(conf, mddev, r10_bio);
+ unfreeze_array(conf);
}
- unfreeze_array(conf);
-
bio = r10_bio->devs[r10_bio->read_slot].bio;
r10_bio->devs[r10_bio->read_slot].bio =
mddev->ro ? IO_BLOCKED : NULL;
next prev parent reply other threads:[~2006-07-31 7:32 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-31 7:31 [PATCH 000 of 9] md: Introduction - assorted cleanup and minor fixes NeilBrown
2006-07-31 7:31 ` [PATCH 001 of 9] md: The scheduled removal of the START_ARRAY ioctl for md NeilBrown
2006-07-31 7:31 ` [PATCH 002 of 9] md: Fix a comment that is wrong in raid5.h NeilBrown
2006-07-31 7:32 ` [PATCH 003 of 9] md: Factor out part of raid1d into a separate function NeilBrown
2006-07-31 7:32 ` NeilBrown [this message]
2006-08-01 17:15 ` [PATCH 004 of 9] md: Factor out part of raid10d " Bill Davidsen
2006-08-01 20:27 ` Neil Brown
2006-07-31 7:32 ` [PATCH 005 of 9] md: Replace magic numbers in sb_dirty with well defined bit flags NeilBrown
2006-07-31 15:33 ` Ingo Oeser
2006-08-01 17:12 ` Bill Davidsen
2006-08-02 22:52 ` Doug Ledford
2006-07-31 7:32 ` [PATCH 006 of 9] md: Remove the working_disks and failed_disks from raid5 state data NeilBrown
2006-07-31 7:43 ` Michael Tokarev
2006-07-31 7:32 ` [PATCH 007 of 9] md: Remove 'working_disks' from raid10 state NeilBrown
2006-07-31 7:32 ` [PATCH 008 of 9] md: Remove working_disks from raid1 state data NeilBrown
2006-07-31 7:32 ` [PATCH 009 of 9] md: Improve locking around error handling NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1060731073208.24470@suse.de \
--to=neilb@suse.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.