From: David Jeffery <david_jeffery@adaptec.com>
To: "linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: [PATCH2.5] ips 3/4: use pci_dma APIs and remove GFP abuse
Date: 15 Aug 2003 08:43:35 -0400 [thread overview]
Message-ID: <1060951415.3251.46.camel@blackmagic> (raw)
[-- Attachment #1: Type: text/plain, Size: 235 bytes --]
This patch removes several places where we were using kmalloc flag
tricks to always get memory <4GB instead of using the proper
dma_alloc_consistent() API. It also no longer #errors on when compiled
for x86-64 kernels.
David Jeffery
[-- Attachment #2: test3.patch3 --]
[-- Type: text/x-patch, Size: 14483 bytes --]
diff -urN linux-2.6.0-test3_p2/drivers/scsi/ips.c linux-2.6.0-test3_p3/drivers/scsi/ips.c
--- linux-2.6.0-test3_p2/drivers/scsi/ips.c 2003-08-11 13:53:24.000000000 -0400
+++ linux-2.6.0-test3_p3/drivers/scsi/ips.c 2003-08-11 13:54:05.000000000 -0400
@@ -198,8 +198,8 @@
#define IPS_VERSION_HIGH "5.99"
#define IPS_VERSION_LOW ".01-BETA"
-#if !defined(__i386__) && !defined(__ia64__)
-#error "This driver has only been tested on the x86/ia64 platforms"
+#if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__)
+#error "This driver has only been tested on the x86/ia64/x86_64 platforms"
#endif
#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,0)
@@ -250,6 +250,7 @@
static int ips_ioctlsize = IPS_IOCTL_SIZE; /* Size of the ioctl buffer */
static int ips_cd_boot; /* Booting from Manager CD */
static char *ips_FlashData = NULL; /* CD Boot - Flash Data Buffer */
+static dma_addr_t ips_flashbusaddr;
static long ips_FlashDataInUse; /* CD Boot - Flash Data In Use Flag */
static uint32_t MaxLiteCmds = 32; /* Max Active Cmds for a Lite Adapter */
static Scsi_Host_Template ips_driver_template = {
@@ -589,17 +590,6 @@
ips_setup(ips);
#endif
- /* If Booting from the Manager CD, Allocate a large Flash */
- /* Buffer ( so we won't need to allocate one for each adapter ). */
- if (ips_cd_boot) {
- ips_FlashData = (char *) __get_free_pages(IPS_INIT_GFP, 7);
- if (ips_FlashData == NULL) {
- /* The validity of this pointer is checked in ips_make_passthru() before it is used */
- printk(KERN_WARNING
- "ERROR: Can't Allocate Large Buffer for Flashing\n");
- }
- }
-
for (i = 0; i < ips_num_controllers; i++) {
if (ips_register_scsi(i))
ips_free(ips_ha[i]);
@@ -1630,21 +1620,20 @@
ips_alloc_passthru_buffer(ips_ha_t * ha, int length)
{
void *bigger_buf;
- int count;
- int order;
+ dma_addr_t dma_busaddr;
- if (ha->ioctl_data && length <= (PAGE_SIZE << ha->ioctl_order))
+ if (ha->ioctl_data && length <= ha->ioctl_len)
return 0;
/* there is no buffer or it's not big enough, allocate a new one */
- for (count = PAGE_SIZE, order = 0;
- count < length; order++, count <<= 1) ;
- bigger_buf = (void *) __get_free_pages(IPS_ATOMIC_GFP, order);
+ bigger_buf = pci_alloc_consistent(ha->pcidev, length, &dma_busaddr);
if (bigger_buf) {
/* free the old memory */
- free_pages((unsigned long) ha->ioctl_data, ha->ioctl_order);
+ pci_free_consistent(ha->pcidev, ha->ioctl_len, ha->ioctl_data,
+ ha->ioctl_busaddr);
/* use the new memory */
ha->ioctl_data = (char *) bigger_buf;
- ha->ioctl_order = order;
+ ha->ioctl_len = length;
+ ha->ioctl_busaddr = dma_busaddr;
} else {
return -1;
}
@@ -1761,7 +1750,7 @@
static int
ips_flash_copperhead(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb)
{
- int datasize, count;
+ int datasize;
/* Trombone is the only copperhead that can do packet flash, but only
* for firmware. No one said it had to make sence. */
@@ -1781,24 +1770,28 @@
pt->BasicStatus = 0;
return ips_flash_bios(ha, pt, scb);
} else if (pt->CoppCP.cmd.flashfw.packet_num == 0) {
- if (ips_FlashData && !test_and_set_bit(0, &ips_FlashDataInUse)) {
+ if (ips_FlashData && !test_and_set_bit(0, &ips_FlashDataInUse)){
ha->flash_data = ips_FlashData;
- ha->flash_order = 7;
+ ha->flash_busaddr = ips_flashbusaddr;
+ ha->flash_len = PAGE_SIZE << 7;
ha->flash_datasize = 0;
} else if (!ha->flash_data) {
datasize = pt->CoppCP.cmd.flashfw.total_packets *
pt->CoppCP.cmd.flashfw.count;
- for (count = PAGE_SIZE, ha->flash_order = 0;
- count < datasize; ha->flash_order++, count <<= 1) ;
- ha->flash_data =
- (char *) __get_free_pages(IPS_ATOMIC_GFP,
- ha->flash_order);
+ ha->flash_data = pci_alloc_consistent(ha->pcidev,
+ datasize,
+ &ha->flash_busaddr);
+ if (!ha->flash_data){
+ printk(KERN_WARNING "Unable to allocate a flash buffer\n");
+ return IPS_FAILURE;
+ }
ha->flash_datasize = 0;
+ ha->flash_len = datasize;
} else
return IPS_FAILURE;
} else {
if (pt->CoppCP.cmd.flashfw.count + ha->flash_datasize >
- (PAGE_SIZE << ha->flash_order)) {
+ ha->flash_len) {
ips_free_flash_copperhead(ha);
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"failed size sanity check\n");
@@ -1987,7 +1980,8 @@
if (ha->flash_data == ips_FlashData)
test_and_clear_bit(0, &ips_FlashDataInUse);
else if (ha->flash_data)
- free_pages((unsigned long) ha->flash_data, ha->flash_order);
+ pci_free_consistent(ha->pcidev, ha->flash_len, ha->flash_data,
+ ha->flash_busaddr);
ha->flash_data = NULL;
}
@@ -2040,12 +2034,7 @@
if (pt->CmdBSize) {
scb->data_len = pt->CmdBSize;
- scb->data_busaddr = pci_map_single(ha->pcidev,
- ha->ioctl_data +
- sizeof (ips_passthru_t),
- pt->CmdBSize,
- IPS_DMA_DIR(scb));
- scb->flags |= IPS_SCB_MAP_SINGLE;
+ scb->data_busaddr = ha->ioctl_busaddr + sizeof (ips_passthru_t);
} else {
scb->data_busaddr = 0L;
}
@@ -2469,9 +2458,7 @@
} else {
/* Morpheus Family - Send Command to the card */
- buffer = kmalloc(0x1000, IPS_ATOMIC_GFP);
- if (!buffer)
- return;
+ buffer = ha->ioctl_data;
memset(buffer, 0, 0x1000);
@@ -2490,11 +2477,7 @@
scb->cmd.flashfw.total_packets = 1;
scb->cmd.flashfw.packet_num = 0;
scb->data_len = 0x1000;
- scb->data_busaddr =
- pci_map_single(ha->pcidev, buffer, scb->data_len,
- IPS_DMA_DIR(scb));
- scb->cmd.flashfw.buffer_addr = scb->data_busaddr;
- scb->flags |= IPS_SCB_MAP_SINGLE;
+ scb->cmd.flashfw.buffer_addr = ha->ioctl_busaddr;
/* issue the command */
if (((ret =
@@ -2503,7 +2486,6 @@
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1)) {
/* Error occurred */
- kfree(buffer);
return;
}
@@ -2513,11 +2495,8 @@
minor = buffer[0x1fe + 0xC0]; /* Offset 0x1fe after the header (0xc0) */
subminor = buffer[0x1fd + 0xC0]; /* Offset 0x1fd after the header (0xc0) */
} else {
- kfree(buffer);
return;
}
-
- kfree(buffer);
}
ha->bios_version[0] = hexDigits[(major & 0xF0) >> 4];
@@ -3984,11 +3963,7 @@
scb->cmd.basic_io.segment_4G = 0;
scb->cmd.basic_io.enhanced_sg = 0;
scb->data_len = sizeof (*ha->enq);
- scb->data_busaddr = pci_map_single(ha->pcidev, ha->enq,
- scb->data_len,
- IPS_DMA_DIR(scb));
- scb->cmd.basic_io.sg_addr = scb->data_busaddr;
- scb->flags |= IPS_SCB_MAP_SINGLE;
+ scb->cmd.basic_io.sg_addr = ha->enq_busaddr;
ret = IPS_SUCCESS;
break;
@@ -4550,7 +4525,8 @@
if (ha) {
if (ha->enq) {
- kfree(ha->enq);
+ pci_free_consistent(ha->pcidev, sizeof(IPS_ENQ),
+ ha->enq, ha->enq_busaddr);
ha->enq = NULL;
}
@@ -4578,11 +4554,11 @@
}
if (ha->ioctl_data) {
- free_pages((unsigned long) ha->ioctl_data,
- ha->ioctl_order);
+ pci_free_consistent(ha->pcidev, ha->ioctl_len,
+ ha->ioctl_data, ha->ioctl_busaddr);
ha->ioctl_data = NULL;
ha->ioctl_datasize = 0;
- ha->ioctl_order = 0;
+ ha->ioctl_len = 0;
}
ips_deallocatescbs(ha, ha->max_cmds);
@@ -5920,10 +5896,7 @@
scb->cmd.basic_io.sector_count = 0;
scb->cmd.basic_io.log_drv = 0;
scb->data_len = sizeof (*ha->enq);
- scb->data_busaddr = pci_map_single(ha->pcidev, ha->enq, scb->data_len,
- IPS_DMA_DIR(scb));
- scb->cmd.basic_io.sg_addr = scb->data_busaddr;
- scb->flags |= IPS_SCB_MAP_SINGLE;
+ scb->cmd.basic_io.sg_addr = ha->enq_busaddr;
/* send command */
if (((ret =
@@ -5966,10 +5939,7 @@
scb->cmd.basic_io.sector_count = 0;
scb->cmd.basic_io.log_drv = 0;
scb->data_len = sizeof (*ha->subsys);
- scb->data_busaddr = pci_map_single(ha->pcidev, ha->subsys,
- scb->data_len, IPS_DMA_DIR(scb));
- scb->cmd.basic_io.sg_addr = scb->data_busaddr;
- scb->flags |= IPS_SCB_MAP_SINGLE;
+ scb->cmd.basic_io.sg_addr = ha->ioctl_busaddr;
/* send command */
if (((ret =
@@ -5978,6 +5948,7 @@
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1))
return (0);
+ memcpy(ha->subsys, ha->ioctl_data, sizeof(*ha->subsys));
return (1);
}
@@ -6013,10 +5984,7 @@
scb->cmd.basic_io.op_code = IPS_CMD_READ_CONF;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
scb->data_len = sizeof (*ha->conf);
- scb->data_busaddr = pci_map_single(ha->pcidev, ha->conf,
- scb->data_len, IPS_DMA_DIR(scb));
- scb->cmd.basic_io.sg_addr = scb->data_busaddr;
- scb->flags |= IPS_SCB_MAP_SINGLE;
+ scb->cmd.basic_io.sg_addr = ha->ioctl_busaddr;
/* send command */
if (((ret =
@@ -6037,7 +6005,8 @@
return (0);
}
-
+
+ memcpy(ha->conf, ha->ioctl_data, sizeof(*ha->conf));
return (1);
}
@@ -6072,11 +6041,10 @@
scb->cmd.nvram.reserved = 0;
scb->cmd.nvram.reserved2 = 0;
scb->data_len = sizeof (*ha->nvram);
- scb->data_busaddr = pci_map_single(ha->pcidev, ha->nvram,
- scb->data_len, IPS_DMA_DIR(scb));
- scb->cmd.nvram.buffer_addr = scb->data_busaddr;
- scb->flags |= IPS_SCB_MAP_SINGLE;
-
+ scb->cmd.nvram.buffer_addr = ha->ioctl_busaddr;
+ if (write)
+ memcpy(ha->ioctl_data, ha->nvram, sizeof(*ha->nvram));
+
/* issue the command */
if (((ret =
ips_send_wait(ha, scb, ips_cmd_timeout, intr)) == IPS_FAILURE)
@@ -6087,7 +6055,8 @@
return (0);
}
-
+ if (!write)
+ memcpy(ha->nvram, ha->ioctl_data, sizeof(*ha->nvram));
return (1);
}
@@ -7242,7 +7211,6 @@
uint16_t subdevice_id;
int j;
int index;
- uint32_t count;
dma_addr_t dma_address;
char *ioremap_ptr;
char *mem_ptr;
@@ -7367,9 +7335,13 @@
return ips_abort_init(ha, index);
}
}
+ if(ips_cd_boot && !ips_FlashData){
+ ips_FlashData = pci_alloc_consistent(pci_dev, PAGE_SIZE << 7,
+ &ips_flashbusaddr);
+ }
- ha->enq = kmalloc(sizeof (IPS_ENQ), IPS_INIT_GFP);
-
+ ha->enq = pci_alloc_consistent(pci_dev, sizeof (IPS_ENQ),
+ &ha->enq_busaddr);
if (!ha->enq) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate host inquiry structure\n");
@@ -7386,7 +7358,7 @@
ha->adapt->hw_status_start = dma_address;
ha->dummy = (void *) (ha->adapt + 1);
- ha->conf = kmalloc(sizeof (IPS_CONF), IPS_INIT_GFP);
+ ha->conf = kmalloc(sizeof (IPS_CONF), GFP_KERNEL);
if (!ha->conf) {
IPS_PRINTK(KERN_WARNING, pci_dev,
@@ -7394,7 +7366,7 @@
return ips_abort_init(ha, index);
}
- ha->nvram = kmalloc(sizeof (IPS_NVRAM_P5), IPS_INIT_GFP);
+ ha->nvram = kmalloc(sizeof (IPS_NVRAM_P5), GFP_KERNEL);
if (!ha->nvram) {
IPS_PRINTK(KERN_WARNING, pci_dev,
@@ -7402,7 +7374,7 @@
return ips_abort_init(ha, index);
}
- ha->subsys = kmalloc(sizeof (IPS_SUBSYS), IPS_INIT_GFP);
+ ha->subsys = kmalloc(sizeof (IPS_SUBSYS), GFP_KERNEL);
if (!ha->subsys) {
IPS_PRINTK(KERN_WARNING, pci_dev,
@@ -7410,19 +7382,18 @@
return ips_abort_init(ha, index);
}
- for (count = PAGE_SIZE, ha->ioctl_order = 0;
- count < ips_ioctlsize; ha->ioctl_order++, count <<= 1) ;
-
- ha->ioctl_data =
- (char *) __get_free_pages(IPS_INIT_GFP, ha->ioctl_order);
- ha->ioctl_datasize = count;
-
+ /* the ioctl buffer is now used during adapter initialization, so its
+ * successful allocation is now required */
+ if (ips_ioctlsize < PAGE_SIZE)
+ ips_ioctlsize = PAGE_SIZE;
+
+ ha->ioctl_data = pci_alloc_consistent(pci_dev, ips_ioctlsize,
+ &ha->ioctl_busaddr);
+ ha->ioctl_len = ips_ioctlsize;
if (!ha->ioctl_data) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate IOCTL data\n");
- ha->ioctl_data = NULL;
- ha->ioctl_order = 0;
- ha->ioctl_datasize = 0;
+ return ips_abort_init(ha, index);
}
/*
diff -urN linux-2.6.0-test3_p2/drivers/scsi/ips.h linux-2.6.0-test3_p3/drivers/scsi/ips.h
--- linux-2.6.0-test3_p2/drivers/scsi/ips.h 2003-08-11 12:43:05.000000000 -0400
+++ linux-2.6.0-test3_p3/drivers/scsi/ips.h 2003-08-11 13:54:05.000000000 -0400
@@ -128,22 +128,13 @@
#define min(x,y) ((x) < (y) ? x : y)
#endif
+ #define pci_dma_hi32(a) ((a >> 16) >> 16)
#define pci_dma_lo32(a) (a & 0xffffffff)
#if (BITS_PER_LONG > 32) || (defined CONFIG_HIGHMEM64G && defined IPS_HIGHIO)
#define IPS_ENABLE_DMA64 (1)
- #define pci_dma_hi32(a) (a >> 32)
#else
#define IPS_ENABLE_DMA64 (0)
- #define pci_dma_hi32(a) (0)
- #endif
-
- #if defined(__ia64__)
- #define IPS_ATOMIC_GFP (GFP_DMA | GFP_ATOMIC)
- #define IPS_INIT_GFP GFP_DMA
- #else
- #define IPS_ATOMIC_GFP GFP_ATOMIC
- #define IPS_INIT_GFP GFP_KERNEL
#endif
/*
@@ -1110,7 +1101,8 @@
uint16_t device_id; /* PCI device ID */
uint8_t slot_num; /* PCI Slot Number */
uint16_t subdevice_id; /* Subsystem device ID */
- uint8_t ioctl_order; /* Number of pages in ioctl */
+ int ioctl_len; /* size of ioctl buffer */
+ dma_addr_t ioctl_busaddr; /* dma address of ioctl buffer*/
uint8_t bios_version[8]; /* BIOS Revision */
uint32_t mem_addr; /* Memory mapped address */
uint32_t io_len; /* Size of IO Address */
@@ -1120,8 +1112,10 @@
ips_hw_func_t func; /* hw function pointers */
struct pci_dev *pcidev; /* PCI device handle */
char *flash_data; /* Save Area for flash data */
- u8 flash_order; /* Save Area for flash size order */
+ int flash_len; /* length of flash buffer */
u32 flash_datasize; /* Save Area for flash data size */
+ dma_addr_t flash_busaddr; /* dma address of flash buffer*/
+ dma_addr_t enq_busaddr; /* dma address of enq struct */
uint8_t requires_esl; /* Requires an EraseStripeLock */
} ips_ha_t;
next reply other threads:[~2003-08-15 12:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-15 12:43 David Jeffery [this message]
2003-08-15 21:09 ` [PATCH2.5] ips 3/4: use pci_dma APIs and remove GFP abuse Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2003-08-18 16:09 Jeffery, David
2003-08-18 23:52 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1060951415.3251.46.camel@blackmagic \
--to=david_jeffery@adaptec.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.