Re: [Bluez-users] Belkin F8T002 PC Card problem with Bluez

[Marcel Holtmann <marcel@rvs.uni-bielefeld.de>]

Hi Alexandre,

> 	I am trying for 3 days to configure this card on my laptop. I am 
> running Mandrake 9.2beta with a hand-compiled kernel 2.4.22.
> 
> 	First, to make my card recognized by the hardware, I have to enter 
> "cardctl insert". It does not do this automatically. Is this normal ? 
> But when I remove the card it beeps and knows that the card is no more 
> here. But this is not the most important problem... Here it is...
> 
> 	I succeeded to know what to do to have the card recognized by the 
> kernel (compile with CONFIG_SERIAL as a module) and now when I do the 
> "cardctl insert"command, I have the new /dev/ttyS4 device that appears. 
> OK. But then, when I try to hciattach it with "hciattach /dev/ttyS4 any 
> flow", the CPU is loaded and in the /var/log/messages logfile is 
> appended a lot of lines, all the same, saying "h4_recv: Unknown HCI 
> packet type ef", with the last "ef" changed with "0f", "18", etc... each 
> time a different hexadecimal number.

try "hciattach /dev/ttyS4 bcsp".

> 	I patched the drivers/char/serial.c module source and the 
> include/linux/pci_ids.h to have the chip recognized by the serial module.

Send the patch (diff -urN) to the mailing list.

Regards

Marcel




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users