From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262799AbTJPK1L (ORCPT ); Thu, 16 Oct 2003 06:27:11 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262801AbTJPK1K (ORCPT ); Thu, 16 Oct 2003 06:27:10 -0400 Received: from genesis.westend.com ([212.117.67.2]:4504 "EHLO genesis.westend.com") by vger.kernel.org with ESMTP id S262799AbTJPK1I convert rfc822-to-8bit (ORCPT ); Thu, 16 Oct 2003 06:27:08 -0400 Subject: Getting Fasttrak TX2 Raid Controler to work. From: Kai Militzer To: linux-kernel@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT X-Mailer: Ximian Evolution 1.0.5 Date: 16 Oct 2003 12:31:08 +0200 Message-Id: <1066300268.1252.21.camel@bart> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi everyone! I tried to get a 2.4.22 kernel to work with support for the Promise Fasttrak TX2 controller. lspci says the following about the controller: 00:0a.0 RAID bus controller: Promise Technology, Inc.:Unknown device 6268 (rev 02) I included CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_BLK_PDC202XX_FORCE=y CONFIG_BLK_DEV_ATARAID=y CONFIG_BLK_DEV_ATARAID_PDC=y in the .config-file When booting the kernel I compiled this way, it detects the Fasttrak, but won't load the RAID, also it is directly compiled into the kernel and not as a module, and can't mount the VFS on /dev/ataraid/d0p* This is no hardware problem or else, because with a debian 2.4.18-bf24 kernel the systems boots without a problem and I can use all devices under /dev/ataraid/d0p* Does anyone have an idea how I can get this to work? Thank you in advance. Best Regards, Kai -- Kai Militzer WESTEND GmbH | Internet-Business-Provider Technik CISCO Systems Partner - Authorized Reseller Lütticher Straße 10 Tel 0241/701333-11 km@westend.com D-52064 Aachen Fax 0241/911879