From: "Ramón Rey Vicente" <ramon.rey@hispalinux.es>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>
Subject: Re: [2.6.0-test9-mm2] Error trying to read a cdrom disc
Date: Tue, 11 Nov 2003 19:24:43 +0100 [thread overview]
Message-ID: <1068575082.1450.7.camel@debian> (raw)
In-Reply-To: <1068574968.1450.6.camel@debian>
[-- Attachment #1.1: Type: text/plain, Size: 227 bytes --]
Sorry, the info about my ide controller
--
Ramón Rey Vicente <ramon dot rey at hispalinux dot es>
jabber ID <rreylinux at jabber dot org>
GPG public key ID 0xBEBD71D5 -> http://pgp.escomposlinux.org/
[-- Attachment #1.2: via_controller_info --]
[-- Type: text/plain, Size: 1476 bytes --]
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.38
South Bridge: VIA vt82c586b
Revision: ISA 0x47 IDE 0x6
Highest DMA rate: UDMA33
BM-DMA base: 0xe000
PCI clock: 33.3MHz
Master Read Cycle IRDY: 1ws
Master Write Cycle IRDY: 1ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes yes
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 40w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA UDMA PIO DMA
Address Setup: 30ns 30ns 30ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 90ns
Data Recovery: 30ns 30ns 30ns 30ns
Cycle Time: 60ns 60ns 120ns 120ns
Transfer Rate: 33.3MB/s 33.3MB/s 16.6MB/s 16.6MB/s
[-- Attachment #2: Esta parte del mensaje está firmada digitalmente --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
prev parent reply other threads:[~2003-11-11 18:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-11 18:22 [2.6.0-test9-mm2] Error trying to read a cdrom disc Ramón Rey Vicente
2003-11-11 18:24 ` Ramón Rey Vicente [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1068575082.1450.7.camel@debian \
--to=ramon.rey@hispalinux.es \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.