From: Len Brown <len.brown@intel.com>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com.br>
Cc: Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [BKPATCH] ACPI for 2.4
Date: 18 Nov 2003 15:58:03 -0500 [thread overview]
Message-ID: <1069189083.2970.540.camel@dhcppc4> (raw)
Hi Marcelo, please do a
bk pull http://linux-acpi.bkbits.net/linux-acpi-release-2.4.23
Asside from the fixes we discussed, I found some of
the ACPI related x86_64 code in need of sync from i386,
so I did that and iterated to fix a few broken build configs.
Of my standard set, !CONFIG_PCI is still broken,
but probably nobody cares. the pci=noacpi code is
updated from 2.6, but both trees needs some cleaning...
It would be good to get some feedback from those with
x86_64 hardware, since I don't currently have any.
thanks,
-Len
ps. a plain patch is also available here:
ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.4.23-rc1/acpi-20031002-2.4.23-rc1.diff.gz
This will update the following files:
Documentation/kernel-parameters.txt | 9 +
MAINTAINERS | 4
arch/i386/kernel/acpi.c | 58 ++++++-
arch/i386/kernel/dmi_scan.c | 1
arch/i386/kernel/io_apic.c | 10 -
arch/i386/kernel/mpparse.c | 4
arch/i386/kernel/setup.c | 6
arch/x86_64/kernel/Makefile | 2
arch/x86_64/kernel/acpi.c | 98 ++++++++++---
arch/x86_64/kernel/e820.c | 10 +
arch/x86_64/kernel/io_apic.c | 20 +-
arch/x86_64/kernel/mpparse.c | 8 -
arch/x86_64/kernel/pci-pc.c | 8 +
arch/x86_64/kernel/setup.c | 4
drivers/acpi/bus.c | 4
drivers/acpi/pci_link.c | 180 ++++++++++++++++++++----
drivers/acpi/system.c | 9 +
include/acpi/acpi_bus.h | 1
include/asm-i386/acpi.h | 29 +--
include/asm-i386/io_apic.h | 23 ++-
include/asm-x86_64/acpi.h | 28 +--
include/asm-x86_64/apic.h | 13 -
include/asm-x86_64/io_apic.h | 21 ++
23 files changed, 412 insertions(+), 138 deletions(-)
through these ChangeSets:
<len.brown@intel.com> (03/11/18 1.1193.1.10)
"pci=noacpi" use pci_disable_acpi() instead of touching use_acpi_pci
directly
<len.brown@intel.com> (03/11/18 1.1063.44.51)
[ACPI] sync some i386 ACPI build fixes into x86_64 to fix
!CONFIG_ACPI build
<len.brown@intel.com> (03/11/18 1.1193.1.8)
x86_64 build fix from previous cset
<len.brown@intel.com> (03/11/18 1.1063.44.50)
i386 build fix from previous cset
<len.brown@intel.com> (03/11/18 1.1193.1.6)
2.4.23 build x86_64 build fixes
<len.brown@intel.com> (03/11/18 1.1063.44.49)
[ACPI] fix x86_64 !CONFIG_ACPI build
<len.brown@intel.com> (03/11/18 1.1063.44.48)
[ACPI] Maintainer: Andy Grover -> Len Brown
<len.brown@intel.com> (03/11/18 1.1063.44.47)
[ACPI] fix x86_64 build errors
<len.brown@intel.com> (03/11/18 1.1063.44.46)
[ACPI]
Re-enable IRQ balacning if IOAPIC mode
http://bugzilla.kernel.org/show_bug.cgi?id=1440
Also allow IRQ balancing in PIC mode if "acpi_irq_balance"
http://bugzilla.kernel.org/show_bug.cgi?id=1391
<len.brown@intel.com> (03/11/18 1.1063.44.45)
[ACPI ] pci=acpi ineffective fix from i386 2.6 (Thomas Schlichter)
http://bugzilla.kernel.org/show_bug.cgi?id=1219
<len.brown@intel.com> (03/11/18 1.1063.44.44)
[ACPI] "acpi_pic_sci=edge" in case platform requires Edge Triggered
SCI
http://bugzilla.kernel.org/show_bug.cgi?id=1390
<len.brown@intel.com> (03/11/18 1.1063.44.43)
[ACPI] print_IO_APIC() only after it is actually programmed
http://bugzilla.kernel.org/show_bug.cgi?id=1177
<len.brown@intel.com> (03/11/17 1.1063.44.42)
[ACPI] fix ACPI/legacy interrupt sharing issue ala 2.6
http://bugzilla.kernel.org/show_bug.cgi?id=1283
<len.brown@intel.com> (03/11/17 1.1063.44.41)
[ACPI] fix poweroff failure ala 2.6 (Ducrot Bruno)
http://bugzilla.kernel.org/show_bug.cgi?id=1456
<len.brown@intel.com> (03/11/07 1.1063.44.40)
[ACPI] In ACPI mode, delay print_IO_APIC() to make its output valid.
http://bugzilla.kernel.org/show_bug.cgi?id=1177
<len.brown@intel.com> (03/11/07 1.1063.44.39)
[ACPI] If ACPI is disabled by DMI BIOS date, then
turn it off completely, including table parsing for HT.
This avoids a crash due to ancient garbled tables.
acpi=force is available to over-ride this default.
http://bugzilla.kernel.org/show_bug.cgi?id=1434
<len.brown@intel.com> (03/10/30 1.1063.44.38)
[ACPI] fix CONFIG_HOTPLUG_PCI_ACPI config (Xose Vazquez Perez)
next reply other threads:[~2003-11-18 20:59 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-18 20:58 Len Brown [this message]
2003-11-20 11:16 ` [BKPATCH] ACPI for 2.4 Len Brown
2003-11-21 17:49 ` Willy Tarreau
2003-11-21 18:46 ` Willy Tarreau
-- strict thread matches above, loose matches on Subject: below --
2004-01-27 5:52 Len Brown
[not found] ` <1075182740.2489.40.camel-D2Zvc0uNKG8@public.gmane.org>
2004-01-27 6:01 ` Nate Lawson
2004-02-07 9:10 Len Brown
2004-02-07 9:10 ` Len Brown
[not found] ` <1076145024.8687.32.camel-D2Zvc0uNKG8@public.gmane.org>
2004-02-08 8:20 ` Willy Tarreau
2004-02-08 8:20 ` Willy Tarreau
[not found] ` <20040208082059.GD29363-HkMpAodKYdnXX8ko2wsARw@public.gmane.org>
2004-02-08 9:08 ` Willy Tarreau
2004-02-08 9:08 ` Willy Tarreau
2004-02-25 10:01 Len Brown
2004-02-25 10:01 ` Len Brown
2004-03-06 6:32 Len Brown
2004-03-06 6:32 ` Len Brown
2004-03-14 6:01 Len Brown
2004-03-14 6:01 ` Len Brown
[not found] ` <1079244088.2173.134.camel-D2Zvc0uNKG8@public.gmane.org>
2004-03-14 16:31 ` Sérgio Monteiro Basto
2004-03-23 10:43 Len Brown
2004-03-23 10:43 ` Len Brown
2004-03-27 0:53 Len Brown
2004-03-27 0:53 ` Len Brown
2004-04-01 10:40 Len Brown
2004-04-01 10:40 ` Len Brown
2004-04-01 12:24 O.Sezer
2004-04-01 12:57 ` O.Sezer
2004-05-06 22:28 Len Brown
2004-05-20 6:14 Len Brown
2004-06-18 7:32 Len Brown
[not found] ` <1087540935.4488.214.camel-D2Zvc0uNKG8@public.gmane.org>
2004-06-18 12:09 ` Marcelo Tosatti
2004-10-28 9:33 Len Brown
2004-10-28 9:33 ` Len Brown
2004-11-09 8:17 Len Brown
2004-11-16 19:26 Len Brown
2004-11-16 19:26 ` Len Brown
2004-11-23 6:34 Len Brown
2005-05-19 6:25 ` Len Brown
2005-01-31 8:32 Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1069189083.2970.540.camel@dhcppc4 \
--to=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.tosatti@cyclades.com.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.