From: "Ronny V. Vindenes" <s864@ii.uib.no>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@lists.sourceforge.net, alsa-user@lists.sourceforge.net
Subject: Re: [Alsa-user] Re: ALSA 1.0.0pre3 release
Date: Wed, 26 Nov 2003 15:30:39 +0100 [thread overview]
Message-ID: <1069857039.3235.19.camel@localhost.localdomain> (raw)
In-Reply-To: <s5hekvvxlkk.wl@alsa2.suse.de>
[-- Attachment #1: Type: text/plain, Size: 2772 bytes --]
On Wed, 2003-11-26 at 15:15, Takashi Iwai wrote:
> At Wed, 26 Nov 2003 15:10:06 +0100,
> Ronny V. Vindenes wrote:
> >
> > On Wed, 2003-11-26 at 13:32, Takashi Iwai wrote:
> > > At Wed, 26 Nov 2003 13:10:11 +0100,
> > > Ronny V. Vindenes wrote:
> > > >
> > > > On Wed, 2003-11-26 at 11:44, Takashi Iwai wrote:
> > > > > At Wed, 26 Nov 2003 01:11:07 +0100,
> > > > > Ronny V. Vindenes wrote:
> > > > > >
> > > > > > On Tue, 2003-11-25 at 20:04, Takashi Iwai wrote:
> > > > > > > Hi,
> > > > > > >
> > > > > > > right now the ALSA 1.0.0pre3 packages are released.
> > > > > > >
> > > > > > > In this version, alsa-tools package was divided to two several ones,
> > > > > > > alsa-tools and alsa-firmware. The latter contains only the firmware
> > > > > > > binary files required by loader programs in alsa-tools package.
> > > > > > > Please test them if you have a board requiring the loader (hdsp,
> > > > > > > mixart, vx, usx2y).
> > > > > > >
> > > > > > > Especially, HDSP users, please test and report whether it works, since
> > > > > > > the hdsploader was modified to load the files dynamically.
> > > > > > >
> > > > > > >
> > > > > >
> > > > > > mmap'ed sound with the cs46xx driver seems to be broken, every other
> > > > > > half second the sound is muted. Non-mmap'ed sound plays normally. This
> > > > > > is under 2.6.0-test9-mm5. The version included in test9-mm5 works as
> > > > > > expected (there was some patches in mm5 against ALSA, but applying those
> > > > > > to 1.0.0pre3 made no difference for this particular problem).
> > > > >
> > > > > there is no big change in cs46xx driver itself, so the change is
> > > > > either in kernel core or in the config.
> > > > > do you use CONFIG_SND_CS46XX_NEW_DSP ?
> > > >
> > > > Yes.
> > > >
> > > > I've tested it with 2.6.0-test10 too now, and I've narrowed it down a
> > > > bit: native alsa mmap'ed or not works, but oss emulation only works
> > > > correctly when not using mmap.
> > > >
> > > > Things like wine, quake3, Enemy Territory all sound awful. Plain
> > > > 2.6.0-test10 works fine in all cases.
> > >
> > > to be sure, try to set direct mode for oss-emulation via writing to
> > > the proc file. see alsa-kernel/Documentation/OSS-Emulation.txt.
> >
> > Setting direct mode made no difference.
> >
> > >
> > > also, please check /proc/asound/card0/pcm0p/sub0/* files in both
> > > cases.
> >
> > I've attached cat /proc/asound/card0/pcm0p/sub0/* for both cases
>
> sorry, i meant the ALSA 1.0.0pre3 and the 2.6.0-test10 (oss-emu with
> mmap). it's known that the mmap support of this chip is not perfect.
> but i still suspect that the base oss-emu code change affected this.
>
>
> Takashi
>
ok, here's from plain test10
--
Ronny V. Vindenes <s864@ii.uib.no>
[-- Attachment #2: 2.6.0-test10 --]
[-- Type: text/plain, Size: 764 bytes --]
access: MMAP_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 22050 (22050/1)
period_size: 512
buffer_size: 16384
tick_time: 1000
OSS format: S16_LE
OSS channels: 2
OSS rate: 22050
OSS period bytes: 2048
OSS periods: 32
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: CS46xx
name: CS46xx
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 31
subdevices_avail: 30
64
state: RUNNING
trigger_time: 1069856885.000853207
tstamp : 1069856889.000718741
delay : 16144
avail : 240
avail_max : 33200
-----
hw_ptr : 85232
appl_ptr : 101376
tstamp_mode: NONE
period_step: 1
sleep_min: 0
avail_min: 512
xfer_align: 1
start_threshold: 1
stop_threshold: 1073741824
silence_threshold: 528
silence_size: 528
boundary: 1073741824
next prev parent reply other threads:[~2003-11-26 14:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-25 19:04 ALSA 1.0.0pre3 release Takashi Iwai
2003-11-26 0:11 ` Ronny V. Vindenes
2003-11-26 10:44 ` [Alsa-user] " Takashi Iwai
2003-11-26 12:10 ` Ronny V. Vindenes
2003-11-26 12:32 ` Re: [Alsa-devel] " Takashi Iwai
2003-11-26 14:10 ` [Alsa-user] " Ronny V. Vindenes
2003-11-26 14:15 ` Takashi Iwai
2003-11-26 14:30 ` Ronny V. Vindenes [this message]
2003-11-26 16:38 ` [Alsa-devel] " Thomas Charbonnel
2003-11-26 17:08 ` Takashi Iwai
2003-11-27 0:46 ` Thomas Charbonnel
2003-11-27 10:43 ` [Alsa-devel] " Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1069857039.3235.19.camel@localhost.localdomain \
--to=s864@ii.uib.no \
--cc=alsa-devel@lists.sourceforge.net \
--cc=alsa-user@lists.sourceforge.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.