From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Knecht Subject: Re: Alsa-1.0.0rc2 Hammerfall Light - small bug report Date: Sat, 06 Dec 2003 18:15:19 -0800 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1070763319.31277.0.camel@Wizard.knechthome.com> References: <1070760538.5385.12.camel@Wizard.knechthome.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1070760538.5385.12.camel@Wizard.knechthome.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Alsa-Devel List-Id: alsa-devel@alsa-project.org On Sat, 2003-12-06 at 17:28, Mark Knecht wrote: > Hi, > The Hammerfall Light driver has a couple of small bugs in the way it > identifies port status in /proc/asound where it lists the spdif port as > an ADAT port. I'm not using spdif on this machine so I cannot check to > see if it shows lock status correctly. Someone may want to look at this. > > Cheers, > Mark Sorry. Forgot to attach what I saw. Note ADAT3 which do not exist on this card. [mark@localhost mark]$ cat /proc/asound/card0/rme9652 RME Digi9636 (Rev 1.5) (Card #1) Buffers: capture ee400000 playback ee000000 IRQ: 10 Registers bus: 0xf5000000 VM: 0xf091d000 Control register: 44006 Latency: 512 samples (2 periods of 2048 bytes) Hardware pointer (frames): 0 Passthru: no Clock mode: autosync Pref. sync source: ADAT1 ADAT1 Input source: ADAT1 optical IEC958 input: Coaxial IEC958 output: Coaxial only IEC958 quality: Consumer IEC958 emphasis: off IEC958 Dolby: off IEC958 sample rate: error flag set ADAT Sample rate: 44100Hz ADAT1: No Lock ADAT2: No Lock ADAT3: No Lock Timecode signal: no Punch Status: 1: off 2: off 3: off 4: off 5: off 6: off 7: off 8: off 9: off 10: off 11: off 12: off 13: off 14: off 15: off 16: off 17: off 18: off [mark@localhost mark]$ ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/