From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] bluepin bash script with immediate pin response From: Marcel Holtmann To: Burkhard Fischer Cc: BlueZ Mailing List In-Reply-To: <400D599B.3070004@web.de> References: <400D599B.3070004@web.de> Content-Type: text/plain Message-Id: <1074648240.7088.30.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 21 Jan 2004 02:24:00 +0100 Hi Burkhard, > I am using BlueFRITZ! USB Bluetooth dongle, the BlueFRITZ > AP-ISDN and ciptool for establishing a connection. > > I want to replace the python script bluepin with a simple shell script > to avoid interactive authentication. A simple echo should do this, > however I found out that a connection is only established when the > bluepin bash script doesn't answer immediately. > > Here is the syslog: > > Jan 20 16:59:02 magito hcid[544]: pin_code_request > (sba=00:04:0E:82:F9:74, dba=00:04:0E:84:06:CA) > Jan 20 16:59:02 magito hcid[1088]: hci_send_cmd 6bkgLuRqDpSIYZgP > Jan 20 16:59:02 magito hcid[544]: pin_code_request > (sba=00:04:0E:82:F9:74, dba=00:04:0E:84:06:CA) > Jan 20 16:59:02 magito hcid[1091]: hci_send_cmd 6bkgLuRqDpSIYZgP > Jan 20 16:59:34 magito kernel: hci_cmd_task: hci0 command tx timeout > > and with "sleep 1" before echoing the pin everything goes well (besides > the occasional tx timeout): > > Jan 20 17:14:35 magito hcid[544]: pin_code_request > (sba=00:04:0E:82:F9:74, dba=0 > 0:04:0E:84:06:CA) > Jan 20 17:14:36 magito hcid[1577]: hci_send_cmd 6bkgLuRqDpSIYZgP > Jan 20 17:14:38 magito kernel: hci_cmd_task: hci0 command tx timeout > Jan 20 17:15:10 magito hcid[544]: pin_code_request > (sba=00:04:0E:82:F9:74, dba=0 > 0:04:0E:84:06:CA) > Jan 20 17:15:11 magito hcid[1596]: hci_send_cmd 6bkgLuRqDpSIYZgP > Jan 20 17:15:11 magito hcid[544]: pin_code_request > (sba=00:04:0E:82:F9:74, dba=0 > 0:04:0E:84:06:CA) > Jan 20 17:15:12 magito kernel: hci_cmd_task: hci0 command tx timeout > Jan 20 17:15:12 magito hcid[1602]: hci_send_cmd 6bkgLuRqDpSIYZgP > Jan 20 17:15:12 magito hcid[544]: link_key_notify (sba=00:04:0E:82:F9:74) > Jan 20 17:15:12 magito hcid[544]: Saving link key 00:04:0E:82:F9:74 > 00:04:0E:84: > 06:CA > Jan 20 17:15:12 magito hcid[544]: link_key_notify (sba=00:04:0E:82:F9:74) > Jan 20 17:15:12 magito hcid[544]: Replacing link key 00:04:0E:82:F9:74 > 00:04:0E: > 84:06:CA > Jan 20 17:15:12 magito kernel: Found 1 CAPI controller(s) on device > 00:04:0E:84: > 06:CA > Jan 20 17:15:12 magito kernel: kcapi: Controller 1: 00:04:0E:84:06:CA > attached > Jan 20 17:15:12 magito kernel: kcapi: card 1 "00:04:0E:84:06:CA" ready. > Jan 20 17:15:12 magito kernel: kcapi: notify up contr 1 > Jan 20 17:15:12 magito kernel: capi: controller 1 up > > I am using 2.4.24 kernel with the mh1-Patch and the source > bluez-libs-2.5.tar.gz > bluez-utils-2.4.tar.gz > bluez-sdp-1.5.tar.gz > > Is there a reason for this behavior show us the dump (hcidump -w ) for a connection setup. Regards Marcel ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users