From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] problems with nc6 with bluez support From: Marcel Holtmann To: Mauro Tortonesi Cc: BlueZ Mailing List In-Reply-To: <200401221042.53134.mtortonesi@ing.unife.it> References: <200401221042.53134.mtortonesi@ing.unife.it> Content-Type: text/plain Message-Id: <1074767225.7263.65.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 22 Jan 2004 11:27:05 +0100 Hi Mauro, > i have just modified nc6 (an advanced IPv6-enabled nc clone) to support > connections over bluetooth. normal connections over l2cap seem to work fine > (although i have not been able to tranfer audio data over l2cap yet) but when > i try to perform data tranfers over sco the looks like nice stuff and if I find some extra time I will test it. But you should forget about the SCO transfers. SCO is for audio transmission (voice) only. Use L2CAP (SOCK_SEQPACKET) and RFCOMM (SOCK_STREAM). > i am using kernel 2.4.25-pre6 and 2.4.22 on my test hosts. perhaps i should > switch to 2.6-series kernels? i am not sure about this, since l2test and > scotest from bluez-utils 2.3 seem to work fine on these kernel. The 2.4.25-pre6 is still fine. If you get a problem with a 2.4 kernel apply the latest of my -mh patches. Regards Marcel ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel