From: Marcel Holtmann <marcel@holtmann.org>
To: Florian <Kimpenhaus@gmx.de>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Bluetooth Access Point elmeg D@VOS-44.dsl
Date: Thu, 26 Feb 2004 14:25:19 +0100 [thread overview]
Message-ID: <1077801919.2754.38.camel@pegasus> (raw)
In-Reply-To: <opr3y5uonaqdj9uv@mail.gmx.de>
Hi Florian,
> sorry my fault Link mode was master. Now I get
>
>
> bash-2.05b# dund --nodetach --connect 00:0B:CE:00:01:8E --msdun
> dund[6848]: DUN daemon ver 1.1
> dund[6848]: Searching for LAP on 00:0B:CE:00:01:8E
> dund[6848]: Connecting to 00:0B:CE:00:01:8E channel 1
> dund[6848]: Connection established
>
> bash-2.05b# hcid -n
> hcid[6838]: HCI daemon ver 2.3 started
> hcid[6838]: HCI dev 0 up
> hcid[6838]: Starting security manager 0
> hcid[6838]: link_key_request (sba=51:3D:23:C9:03:00, dba=8E:01:00:CE:0B:00)
> hcid[6838]: link_key_request (sba=51:3D:23:C9:03:00, dba=8E:01:00:CE:0B:00)
>
> bash-2.05b# hcidump
> HCIDump - HCI packet analyzer ver 1.5
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Read Local Supported Features(0x04|0x0003) plen 0
> > HCI Event: Command Complete(0x0e) plen 12
> < HCI Command: Read Buffer Size(0x04|0x0005) plen 0
> > HCI Event: Command Complete(0x0e) plen 11
> < HCI Command: Read BD ADDR(0x04|0x0009) plen 0
> > HCI Event: Command Complete(0x0e) plen 10
> < HCI Command: Read Voice Setting(0x03|0x0025) plen 0
> > HCI Event: Command Complete(0x0e) plen 6
> < HCI Command: Set Event Filter(0x03|0x0005) plen 2
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Page Timeout(0x03|0x0018) plen 2
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Connection Accept Timeout(0x03|0x0016) plen 2
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Scan Enable(0x03|0x001a) plen 1
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Authentication Enable(0x03|0x0020) plen 1
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Encryption Mode(0x03|0x0022) plen 1
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Class of Device(0x03|0x0024) plen 3
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Change Local Name(0x03|0x0013) plen 248
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Create Connection(0x01|0x0005) plen 13
> > HCI Event: Command Status(0x0f) plen 4
> > HCI Event: Role Change(0x12) plen 8
> > HCI Event: Link Key Request(0x17) plen 6
> < HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> > HCI Event: Command Complete(0x0e) plen 10
> > HCI Event: Connect Complete(0x03) plen 11
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 1 scid 0x0040
> < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> > HCI Event: Command Complete(0x0e) plen 6
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > HCI Event: Max Slots Change(0x1b) plen 3
> > HCI Event: Link Key Request(0x17) plen 6
> < HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> > HCI Event: Command Complete(0x0e) plen 10
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
> MTU 2016
> < ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> < ACL data: handle 0x0006 flags 0x02 dlen 22
> L2CAP(d): cid 0x40 len 18 [psm 1]
> SDP SSA Req: tid 0x0 len 0xd
> pat uuid-16 0x1102 (LAN)
> max 0xffff
> aid(s) 0x0004 (ProtocolDescList)
> cont 00
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 1
> L2CAP(d): cid 0x40 len 31 [psm 1]
> SDP SSA Rsp: tid 0x0 len 0x1a
> cnt 0x17
> len 0x17 frm->len 0x15 n 0x14
> srv rec #0
> aid 0x0004 (ProtocolDescList)
> uuid-16 0x0100 (L2CAP)
> uuid-16 0x0003 (RFCOMM) uint 0x1
> cont 00
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 3 scid 0x0041
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
> < ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
> MTU 1024
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
> MTU 2016
> < ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> < ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x40 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x41 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 0x0006 flags 0x02 dlen 18
> L2CAP(d): cid 0x40 len 14 [psm 3]
> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 1019
> max_r
> etrans 0 credits 7
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 18
> L2CAP(d): cid 0x41 len 14 [psm 3]
> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size 1019
> max_r
> etrans 0 credits 0
> < ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x40 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> > ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x41 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x40 len 8 [psm 3]
> RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> > ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x41 len 8 [psm 3]
> RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x40 len 8 [psm 3]
> RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> > ACL data: handle 0x0006 flags 0x02 dlen 9
> L2CAP(d): cid 0x41 len 5 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c
> > ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x41 len 8 [psm 3]
> RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> < ACL data: handle 0x0006 flags 0x02 dlen 9
> L2CAP(d): cid 0x40 len 5 [psm 3]
> RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86
> < ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(d): cid 0x40 len 10 [psm 3]
> RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 48
> L2CAP(d): cid 0x41 len 44 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 39 fcs 0x5c
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 13
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 13
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 13
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
>
>
>
>
> looks like we are on stepp away from getting this working.
> So could you tell me what comes next or is there a nice howto
> for the next step(s)(I am getting a bad conscience writing so
> many begging mails and keep you off your work) If no howto exist
> I promise to write one if I get it running.
you should have a working PPP over RFCOMM connection. There are many
howto's at http://www.holtmann.org/linux/bluetooth/ and now it is only a
problem of using the right PPP settings.
Regards
Marcel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-02-26 13:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-25 15:23 [Bluez-users] Bluetooth Access Point elmeg D@VOS-44.dsl Florian
2004-02-25 16:18 ` Marcel Holtmann
2004-02-25 18:11 ` Florian
[not found] ` <opr3xs5louqdj9uv@mail.gmx.de>
2004-02-25 18:42 ` Marcel Holtmann
[not found] ` <opr3xydd1hqdj9uv@mail.gmx.de>
2004-02-25 20:28 ` Marcel Holtmann
[not found] ` <opr3x23lc1qdj9uv@mail.gmx.de>
2004-02-25 22:12 ` Marcel Holtmann
[not found] ` <opr3x77rphqdj9uv@mail.gmx.de>
2004-02-25 23:51 ` Marcel Holtmann
[not found] ` <opr3x8uqadqdj9uv@mail.gmx.de>
2004-02-26 0:58 ` Marcel Holtmann
[not found] ` <opr3yb4dsoqdj9uv@mail.gmx.de>
2004-02-26 1:18 ` Marcel Holtmann
[not found] ` <opr3y5uonaqdj9uv@mail.gmx.de>
2004-02-26 13:25 ` Marcel Holtmann [this message]
[not found] ` <opr31ccpcoqdj9uv@mail.gmx.de>
2004-02-27 15:30 ` Marcel Holtmann
[not found] ` <opr4anrqloqdj9uv@mail.gmx.de>
2004-03-03 17:24 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1077801919.2754.38.camel@pegasus \
--to=marcel@holtmann.org \
--cc=Kimpenhaus@gmx.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.