From mboxrd@z Thu Jan  1 00:00:00 1970
From: Clement MOREAU <clement.moreau@inventel.fr>
Date: Wed, 05 May 2004 06:46:50 +0000
Subject: [LARTC] Simple HTB setup with tcng
Message-Id: <1083739609.7835.12.camel@cmo>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hello all, 

I am trying to set up a simple htb based system, where packets with
source ip 10.0.0.1 should have their own class. 
I plan to use tcng to set it up easier. 

Is there something wrong in my tcng file ? 

~/tcng$ cat htb
/*
 */

#include "fields.tc"
#include "ports.tc"

dev eth0 {
        htb ( ) { 
            class ( rate 600kbps, ceil 600kbps ) 
            { 
                class () if ip_src = 10.0.0.1 ; 
                class (default) ;
            } 
        }
}


When I compile it, I get : 

~/tcng$ tcc htb

# ================ Device eth0 

tc qdisc add dev eth0 handle 1:0 root htb default 3
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 75000bps ceil
75000bps
tc class add dev eth0 parent 1:1 classid 1:2 htb rate 75000bps ceil
75000bps
tc class add dev eth0 parent 1:1 classid 1:3 htb rate 75000bps ceil
75000bps
tc filter add dev eth0 parent 1:1 protocol all prio 1 u32 match u32
0xa000001 0xffffffff at 12 classid 1:2


which is not working as expected. 
Packets never get matched. From what I understand of tc (not too much),
the filter should have been : 
tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u32
0xa000001 0xffffffff at 12 classid 1:2

(I replaced parent 1:1 by parent 1:0). 

I tried this setup and it works as expected (at least : packets from the
server gets matched, other don't. I have used tc -s class show dev eth0
to see it).

Do I miss something ? 

Thank you.

-- 
Clement MOREAU <clement.moreau@inventel.fr>


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/