From: Wim Vanderbauwhede <wim@motherearth.org>
To: Sander Nagtegaal <trunks-carracho@planet.nl>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] Re: Qemu-devel Digest, Vol 15, Issue 19 - WINE with QEMU on non-86x processor?
Date: Mon, 07 Jun 2004 11:27:40 +0100 [thread overview]
Message-ID: <1086604060.3736.30.camel@sicilia> (raw)
In-Reply-To: <200406071153.13888.trunks-carracho@planet.nl>
[-- Attachment #1: Type: text/plain, Size: 1618 bytes --]
In attachment my wine config file. Save it as ~/.wine/config
and edit the "Path" entries under the [Drive ...] entries a bit so that
all paths point to meaningful directories:
[Drive C]
"Path"="/home/ARCHS/rh_x86/usr/share/wine-c"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
; make sure that device is correct and has proper permissions !
"Device" = "/dev/cdrom"
[Drive E]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"
[Drive F]
"Path" = "/home/wim"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"
[Drive G]
"Path" = "/home/ARCHS/rh_x86"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
On Mon, 2004-06-07 at 10:53, Sander Nagtegaal wrote:
> Op maandag 7 juni 2004 10:29, schreef u:
> > -I assume you know how to set up wine (I mean adapting the
> > ~/.wine/config file). My qemu-wine home directory is usr/share/wine-c in
> > the target platform directory. If you like I can mail my .wine/config
> > file.
>
> No......I do not know how to set up wine..That was my next problem after I
> managed to let qemu run the "ls" file. Could you mail the config or email me
> how to set it up? Thanks alot! You're a great help. I'm going to try it!
>
[-- Attachment #2: qemu_wine_config --]
[-- Type: text/plain, Size: 7966 bytes --]
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is nescessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
;;[Drive A]
;;"Path" = "/mnt/fd0"
;;"Type" = "floppy"
;;"Label" = "Floppy"
;;"Serial" = "87654321"
;;"Device" = "/dev/fd0"
[Drive C]
"Path"="/home/ARCHS/rh_x86/usr/share/wine-c"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
; make sure that device is correct and has proper permissions !
"Device" = "/dev/cdrom"
[Drive E]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"
[Drive F]
"Path" = "/home/wim"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"
[Drive G]
"Path" = "/home/ARCHS/rh_x86"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
[wine]
"Windows" = "c:\\windows"
"System" = "c:\\windows\\system"
"Temp" = "e:\\"
"Path" = "c:\\windows;c:\\windows\\system;e:\\;e:\\test;f:\\"
"Profile" = "c:\\windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
"ShellLinker" = "wineshelllink"
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win2k3,win20,win30,win31)
"Windows" = "winxp" ; DOS version to imitate
;"DOS" = "6.22"
# <wineconf>
; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"advapi32" = "builtin"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv" = "builtin, native"
"ddraw" = "builtin, native"
"dinput" = "builtin, native"
"dsound" = "builtin, native"
"opengl32" = "builtin, native"
"msvcrt" = "native, builtin"
"rpcrt4" = "native, builtin"
"msvideo" = "builtin, native"
"msvfw32" = "builtin, native"
"mcicda.drv" = "builtin, native"
"mciseq.drv" = "builtin, native"
"mciwave.drv" = "builtin, native"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msacm.drv" = "builtin, native"
"msacm" = "builtin, native"
"msacm32" = "builtin, native"
"midimap.drv" = "builtin, native"
; default for all other dlls
"*" = "native, builtin, so"
[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "N"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "640x480"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
#"UseDGA" = "Y"
"UseDGA" = "N"
; Use XShm extension if present
"UseXShm" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;;"Synchronous" = "Y"
[fonts]
;Read documentation/fonts before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"
;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"
[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"
[parallelports]
"Lpt1" = "/dev/lp0"
[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
;"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"
[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"
[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
;"write" = "0x779,0x379,0x280-0x2a0"
[spy]
"Exclude" = "WM_SIZE;WM_TIMER;"
[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"
[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has *nothing* to do with the windows version Wine returns:
;; use cmdline option --winver if you want that.
"WineLook" = "Win95"
[Console]
;"Drivers" = "tty"
;"XtermProg" = "nxterm"
;"InitialRows" = "25"
;"InitialColumns" = "80"
;"TerminalType" = "nxterm"
[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"
; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/a2ps/afm"
"3" = "/usr/share/enscript"
"4" = "/usr/X11R6/lib/X11/fonts/Type1"
[WinMM]
"Drivers" = "wineoss.drv"
#"Drivers" = "winearts.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"
;; sample AppDefaults entries
;[AppDefaults\\iexplore.exe\\DllOverrides]
;"shlwapi" = "native"
;"rpcrt4" = "native"
;"ole32" = "native"
;"shdocvw" = "native"
;"wininet" = "native"
;"shfolder" = "native"
;"shell32" = "native"
;"shell" = "native"
;"comctl32" = "native"
;
;[AppDefaults\\setup.exe\\x11drv]
;"Desktop" = "800x600"
# </wineconf>
next prev parent reply other threads:[~2004-06-07 10:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <E1BWhiS-0006Mt-00@moses.all2all.org>
2004-06-05 20:56 ` [Qemu-devel] Re: Qemu-devel Digest, Vol 15, Issue 19 - WINE with QEMU on non-86x processor? Wim Vanderbauwhede
[not found] ` <200406052312.04434.trunks-carracho@planet.nl>
2004-06-07 8:29 ` Wim Vanderbauwhede
[not found] ` <200406071153.13888.trunks-carracho@planet.nl>
2004-06-07 10:27 ` Wim Vanderbauwhede [this message]
[not found] ` <200406071535.27517.trunks-carracho@planet.nl>
2004-06-07 13:55 ` [Qemu-devel] Re: WINE with QEMU on PPC Wim Vanderbauwhede
2004-06-07 16:02 ` Sander Nagtegaal
2004-06-07 17:51 ` Mark Guertin
2004-06-07 20:07 ` Wim Vanderbauwhede
[not found] ` <200406072332.06794.trunks-carracho@planet.nl>
2004-06-07 21:36 ` Sander Nagtegaal
2004-06-07 22:10 ` Sander Nagtegaal
2004-06-08 7:12 ` Wim Vanderbauwhede
2004-06-08 8:54 ` Sander Nagtegaal
[not found] ` <1086685662.3281.4.camel@sicilia>
[not found] ` <200406081553.31093.trunks-carracho@planet.nl>
2004-06-08 14:10 ` [Qemu-devel] Re: WINE with QEMU on PPC: importance of gcc/glibc versions? Sander Nagtegaal
2004-06-09 7:57 ` Wim Vanderbauwhede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1086604060.3736.30.camel@sicilia \
--to=wim@motherearth.org \
--cc=qemu-devel@nongnu.org \
--cc=trunks-carracho@planet.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.