From mboxrd@z Thu Jan 1 00:00:00 1970 From: "lartc@manchotnetworks.net" Date: Thu, 05 Aug 2004 09:59:20 +0000 Subject: RE: [LARTC] TC-ng questions/problems Message-Id: <1091699959.13878.4.camel@drs0> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi Joost, OK -- on the units of measure -- you may to double check that your upstream provider is 2.000.000 bits/s and not 2 * 1024^1024. I think that your r2q is probably off -- please see: http://www.docum.org/stef.coene/qos/faq/cache/31.html Check your system log as well -- you may see an indication of the problem. You can try #define MYR2Q 20 and then in your htb declaration try htb ( r2q MYR2Q ) Also consider specifying a burst of 6kB and try someother values. Cheers Charles On Thu, 2004-08-05 at 10:26, Joost Kraaijeveld wrote: > Hi Chalres, > > Thanks for the answer. I have also been bitten by the byte/bit bug in the past but in this case it must be something different. All my values are in in the correct amount of bits. > > The most important problem is actually problem 2: why does the tc toward internet (dev WAN) do what it does? > > > Groeten, > > Joost Kraaijeveld > Askesis B.V. > Molukkenstraat 14 > 6524NB Nijmegen > tel: 024-3888063 / 06-51855277 > fax: 024-3608416 > e-mail: J.Kraaijeveld@Askesis.nl > web: www.askesis.nl > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/