From: Richard Worwood <mlists@tdbnetworks.org>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] BlueZ Newbie
Date: Tue, 17 Aug 2004 06:00:10 +0100 [thread overview]
Message-ID: <1092718810.3163.76.camel@hellontoast> (raw)
[-- Attachment #1: Type: text/plain, Size: 1089 bytes --]
Firstly apologies in advance if I ask any stupid questions but I'm a
complete newbie to BlueZ and am trying to use it to enable me to dial-up
to the net using gprs.
Any way to the problem I've got all the way to the point that rfcomm
associations happen automatically and then I try to access the device
using minicom and it starts fine but doesn't appear to be completing the
connection process and then drops.
I've included extracts from the /var/log/messages output my config files
and an hcidump for your review.
Thanks in advance
Richard
/var/log/messages extract:
Aug 17 05:26:52 hellontoast hcid[4513]: HCI dev 0 registered
Aug 17 05:26:53 hellontoast hcid[4513]: HCI dev 0 up
Aug 17 05:26:53 hellontoast hcid[4513]: Starting security manager 0
^[[AAug 17 05:28:22 hellontoast hcid[4513]: link_key_request
(sba=00:10:60:A4:75:55, dba=00:0E:07:CA:15:AE)
Aug 17 05:34:13 hellontoast hcid[4513]: link_key_request
(sba=00:10:60:A4:75:55, dba=00:0E:07:CA:15:AE)
Aug 17 05:34:23 hellontoast hcid[4513]: link_key_request
(sba=00:10:60:A4:75:55, dba=00:0E:07:CA:15:AE)
--
Richard
[-- Attachment #2: hcid.conf --]
[-- Type: text/plain, Size: 1547 bytes --]
#
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.3 2002/07/18 18:12:46 maxk Exp $
#
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
# PIN helper
pin_helper /etc/bluetooth/bluepin
#pin_helper /usr/bin/bluepin;
#dbus_pin_helper;
# A dbus PIN daemon can be found at
# ftp://ftp.handhelds.org/pub/projects/gpe/source/bluez-pin-0.20.tar.gz
}
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "%h-%d";
# Local device class
class 0x120104;
# Default packet type
#pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
#
#lm accept,master;
#
lm accept,master;
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
#
#lp hold,sniff;
#
lp hold,sniff,park;
# Authentication and Encryption
auth enable;
encrypt enable;
}
[-- Attachment #3: hcidump.log --]
[-- Type: text/x-log, Size: 7959 bytes --]
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection(0x01|0x0005) plen 13
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connect Complete(0x03) plen 11
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Max Slots Change(0x1b) plen 3
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0084 scid 0x0040 result 1 status 2
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0084 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0084 flags 0x0000 clen 4
MTU 1024
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0084 flags 0x0000 result 0 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 17
> ACL data: handle 0x0029 flags 0x01 dlen 1
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x84 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0084
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0084
> HCI Event: Number of Completed Packets(0x13) plen 5
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0085 scid 0x0040 result 1 status 2
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0085 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0085 flags 0x0000 clen 4
MTU 1024
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0085 flags 0x0000 result 0 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
MTU 672
> HCI Event: Number of Completed Packets(0x13) plen 5
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x85 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x0029 flags 0x02 dlen 18
L2CAP(d): cid 0x85 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 17
> ACL data: handle 0x0029 flags 0x01 dlen 1
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 3
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x85 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Link Key Request(0x17) plen 6
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> HCI Event: Command Complete(0x0e) plen 10
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x85 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 1 len 3
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 1 len 3
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x85 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 1 len 3
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 2 pf 1 ilen 0 fcs 0xd9
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x85 len 4 [psm 3]
RFCOMM(s): UA: cr 0 dlci 2 pf 1 ilen 0 fcs 0xf3
< ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x85 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0085 scid 0x0040
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 1 len 3
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0085 scid 0x0040
> HCI Event: Disconn Complete(0x05) plen 4
> HCI Event: Connect Request(0x04) plen 10
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connect Complete(0x03) plen 11
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
> HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connection Packet Type Changed(0x1d) plen 5
> ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0086
< ACL data: handle 0x002a flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0086 result 0 status 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x002a flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0086 flags 0x0000 result 0 clen 0
< ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0086 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x002a flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x002a flags 0x02 dlen 17
L2CAP(d): cid 0x40 len 13 [psm 1]
SDP SS Req: tid 0x1 len 0x8
pat uuid-16 0x1101 (SP)
max 0x14
cont 00
< ACL data: handle 0x002a flags 0x02 dlen 14
L2CAP(d): cid 0x86 len 10 [psm 1]
SDP SS Rsp: tid 0x1 len 0x5
cur 0x0 tot 0x0
cont 00
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Max Slots Change(0x1b) plen 3
> ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0086
< ACL data: handle 0x002a flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0086
> HCI Event: Number of Completed Packets(0x13) plen 5
< HCI Command: Disconnect(0x01|0x0006) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Disconn Complete(0x05) plen 4
[-- Attachment #4: rfcomm.conf --]
[-- Type: text/plain, Size: 365 bytes --]
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#
#
# Example:
#
rfcomm0 {
# # Automatically bind the device at startup
bind yes;
#
# # Bluetooth address of the device
device 00:0E:07:CA:15:AE;
#
# # RFCOMM channel for the connection
channel 1;
#
# # Description of the connection
comment "Example Bluetooth device";
}
[-- Attachment #5: bluepin --]
[-- Type: application/x-shellscript, Size: 28 bytes --]
[-- Attachment #6: link_key --]
[-- Type: application/octet-stream, Size: 36 bytes --]
[-- Attachment #7: pin --]
[-- Type: text/plain, Size: 5 bytes --]
3497
next reply other threads:[~2004-08-17 5:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-17 5:00 Richard Worwood [this message]
2004-08-17 7:02 ` [Bluez-users] BlueZ Newbie Marcel Holtmann
2004-08-17 9:02 ` mlists
2004-08-17 10:07 ` Bc. Michal Semler
2004-08-17 9:40 ` mlists
2004-08-17 12:02 ` Marcel Holtmann
2004-08-17 21:02 ` Richard Worwood
2004-08-18 8:09 ` Richard Worwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1092718810.3163.76.camel@hellontoast \
--to=mlists@tdbnetworks.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.