From: "Nathanial A. Byrnes" <nate@qabal.org>
To: Gordon Henderson <gordon@drogon.net>
Cc: linux-raid@vger.kernel.org
Subject: Re: RAID 5 on four IDE channels doesn't work
Date: Mon, 11 Oct 2004 00:02:23 -0400 [thread overview]
Message-ID: <1097467343.8389.10.camel@vilya> (raw)
In-Reply-To: <Pine.LNX.4.56.0410101951040.9395@lion.drogon.net>
Hi Gordon,
Thanks for your reply. Actually, I used mknod directly, I got the major
and minor numbers from /sys/block/hd?/dev, and just made the block file
entries, then I was able to use fdisk to see the drives. So the entries
in /sys tell me the kernel saw the devices, and fdisk would lead me to
believe that the entries in /dev were OK.
root@qabal:~# ls -Fal /dev/hd[ik]
brw-r--r-- 1 root root 56, 0 Oct 10 02:19 /dev/hdi
brw-r--r-- 1 root root 57, 0 Oct 10 02:20 /dev/hdk
For some reason, when I run autostart (sorry no output, I have to
reconfigure and reboot to be able to e-mail) it doesn't even mention the
higher drives, it just tells me that there is something wrong with the
super-blocks on the devices with the major and minor numbers of
/dev/hd[eg] and then tries to start the array with just those two
devices. Any ideas?
Thanks Again,
Nate
On Sun, 2004-10-10 at 14:56, Gordon Henderson wrote:
> On Sun, 10 Oct 2004, Nathanial A. Byrnes wrote:
>
> > Where hde-hdh are on my PCI promise controller, and hdi-hdl are on my
> > onboard HighPoint 366 controller. (The same array worked on just the
> > Highpoint 366 controller as well)
>
> Assuming you have the right driver compiled into the kernel, /dev doesn't
> list hdi-l by default (at least not on my Debian systems) Check the dmesg
> output to make sure the driver is compiled in and it's recognising the
> drives.
>
> You might need to run MAKEDEV with the right runes - but worse, I've had
> to hand-edit this file to insert the right major/minor device numbers for
> some really high alphabetical letters.
>
> I have this:
>
> brw-rw---- 1 root disk 3, 0 Mar 14 2002 hda
> brw-rw---- 1 root disk 3, 64 Mar 14 2002 hdb
> brw-rw---- 1 root disk 22, 0 Mar 14 2002 hdc
> brw-rw---- 1 root disk 22, 64 Mar 14 2002 hdd
> brw-rw---- 1 root disk 33, 0 Mar 14 2002 hde
> brw-rw---- 1 root disk 33, 64 Mar 14 2002 hdf
> brw-rw---- 1 root disk 34, 0 Mar 14 2002 hdg
> brw-rw---- 1 root disk 34, 64 Mar 14 2002 hdh
> brw-rw---- 1 root disk 56, 0 May 24 15:31 hdi
> brw-rw---- 1 root disk 56, 64 May 24 15:31 hdj
> brw-rw---- 1 root disk 57, 0 May 24 15:31 hdk
> brw-rw---- 1 root disk 57, 64 May 24 15:31 hdl
> brw-rw---- 1 root disk 88, 0 May 24 16:00 hdm
> brw-rw---- 1 root disk 88, 64 May 24 16:00 hdn
> brw-rw---- 1 root disk 89, 0 May 24 16:00 hdo
> brw-rw---- 1 root disk 89, 64 May 24 16:00 hdp
> brw-rw---- 1 root disk 90, 0 May 24 16:00 hdq
> brw-rw---- 1 root disk 90, 64 May 24 16:00 hdr
>
> I think I had to dig in the kernel originally to get the major/minor
> devices. Hope this is of use.
>
> You can get the MAKEDEV I used to create these from
> http://www.drogon.net/MAKEDEV
>
> Gordon
>
> !DSPAM:4169860d14355587716053!
prev parent reply other threads:[~2004-10-11 4:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-10 18:14 RAID 5 on four IDE channels doesn't work Nathanial A. Byrnes
2004-10-10 18:56 ` Gordon Henderson
2004-10-11 4:02 ` Nathanial A. Byrnes [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1097467343.8389.10.camel@vilya \
--to=nate@qabal.org \
--cc=gordon@drogon.net \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.