From: Marcel Holtmann <marcel@holtmann.org>
To: Hans Bausewein <hans@comerwell.xs4all.nl>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Broadcom Corporation (Firmware 105.105.074) USB dongle
Date: Sat, 30 Oct 2004 13:47:57 +0200 [thread overview]
Message-ID: <1099136877.6912.41.camel@pegasus> (raw)
In-Reply-To: <20041030094327.GA8724@comerwell.xs4all.nl>
[-- Attachment #1: Type: text/plain, Size: 1727 bytes --]
Hi Hans,
> My new USB dongle (MyCom label, but it's a Broadcom) does not work with
> Linux Debian (unstable) kernel 2.4.27 or 2.6.8 and bluez-utils 2.10-1
> (Debian package). It loads, but scanning does not work.
>
> p2:~# hciconfig -a
> hci0: Type: USB
> BD Address: 00:02:72:C0:11:1C ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING
> RX bytes:163 acl:0 sco:0 events:21 errors:0
> TX bytes:583 acl:0 sco:0 commands:21 errors:0
> Features: 0xff 0xff 0x0d 0x38 0x08 0x08 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Can't read local name on hci0. Input/output error(5)
>
>
> p2:~# hciconfig hci0 version
> hci0: Type: USB
> BD Address: 00:02:72:C0:11:1C ACL MTU: 377:10 SCO MTU: 16:0
> HCI Ver: 1.2 (0x2) HCI Rev: 0x69 LMP Ver: 1.2 (0x2) LMP Subver:
> 0x694a
> Manufacturer: Broadcom Corporation (15)
>
> p2:~# hciconfig hci0 revision
> hci0: Type: USB
> BD Address: 00:02:72:C0:11:1C ACL MTU: 377:10 SCO MTU: 16:0
> Firmware 105.105.074
>
> p2:~# lsusb
> Bus 001 Device 009: ID 0a5c:3503 Broadcom Corp.
> Bus 001 Device 008: ID 0a5c:3502 Broadcom Corp.
> Bus 001 Device 007: ID 0a5c:2009 Broadcom Corp.
> Bus 001 Device 006: ID 0a5c:3535 Broadcom Corp.
> Bus 001 Device 001: ID 0000:0000
please send us the content of /proc/bus/usb/devices and you can try the
attached patch.
> Or should I better swap the device for a (more expensive) MSI ?
The CSR based dongles actually make less problems. If you don't need it
anymore, you can donate it to me, because I really need these kind of
dongles for testing.
Regards
Marcel
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 687 bytes --]
===== drivers/bluetooth/hci_usb.c 1.58 vs edited =====
--- 1.58/drivers/bluetooth/hci_usb.c 2004-10-27 23:42:21 +02:00
+++ edited/drivers/bluetooth/hci_usb.c 2004-10-30 13:42:04 +02:00
@@ -101,8 +101,12 @@
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = HCI_IGNORE },
/* Broadcom BCM2035 */
+ { USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_RESET | HCI_BROKEN_ISOC },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = HCI_RESET | HCI_BROKEN_ISOC },
+ /* Microsoft Wireless Transceiver for Bluetooth 2.0 */
+ { USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET | HCI_BROKEN_ISOC },
+
/* ISSC Bluetooth Adapter v3.1 */
{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
next prev parent reply other threads:[~2004-10-30 11:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-30 9:43 [Bluez-users] Broadcom Corporation (Firmware 105.105.074) USB dongle Hans Bausewein
2004-10-30 11:47 ` Marcel Holtmann [this message]
2004-10-30 12:44 ` Hans Bausewein
2004-10-30 13:41 ` Marcel Holtmann
2004-10-30 15:23 ` Hans Bausewein
2004-10-30 15:42 ` Marcel Holtmann
2004-10-30 15:57 ` Hans Bausewein
2004-10-30 16:10 ` Marcel Holtmann
2004-10-30 19:59 ` Hans Bausewein
2004-10-30 20:23 ` Marcel Holtmann
2004-10-30 20:47 ` Hans Bausewein
2004-11-02 21:40 ` Hans Bausewein
2004-11-02 21:58 ` Marcel Holtmann
2004-11-05 13:33 ` Hans Bausewein
2004-11-05 14:22 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1099136877.6912.41.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
--cc=hans@comerwell.xs4all.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.