From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI fixes for 2.6.10-rc1
Date: Fri, 12 Nov 2004 15:21:56 -0800 [thread overview]
Message-ID: <11003017162945@kroah.com> (raw)
In-Reply-To: <11003017161569@kroah.com>
ChangeSet 1.2026.66.13, 2004/11/05 15:05:24-08:00, matthew@wil.cx
[PATCH] PCI: add pci_fixup_early
Port Ivan's early PCI fixups patch to 2.6.10-rc1. Also fix some indentation
to make it less than 80 columns.
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
drivers/pci/probe.c | 3 +++
include/asm-generic/vmlinux.lds.h | 3 +++
include/linux/pci.h | 34 ++++++++++++++++++----------------
3 files changed, 24 insertions(+), 16 deletions(-)
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c 2004-11-12 15:13:20 -08:00
+++ b/drivers/pci/probe.c 2004-11-12 15:13:20 -08:00
@@ -478,6 +478,9 @@
/* "Unknown power state" */
dev->current_state = 4;
+ /* Early fixups, before probing the BARs */
+ pci_fixup_device(pci_fixup_early, dev);
+
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
if (class == PCI_CLASS_BRIDGE_PCI)
diff -Nru a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
--- a/include/asm-generic/vmlinux.lds.h 2004-11-12 15:13:20 -08:00
+++ b/include/asm-generic/vmlinux.lds.h 2004-11-12 15:13:20 -08:00
@@ -18,6 +18,9 @@
\
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
+ *(.pci_fixup_early) \
+ VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
*(.pci_fixup_header) \
VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
diff -Nru a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h 2004-11-12 15:13:20 -08:00
+++ b/include/linux/pci.h 2004-11-12 15:13:20 -08:00
@@ -989,31 +989,33 @@
*/
struct pci_fixup {
- u16 vendor, device; /* You can use PCI_ANY_ID here of course */
+ u16 vendor, device; /* You can use PCI_ANY_ID here of course */
void (*hook)(struct pci_dev *dev);
};
enum pci_fixup_pass {
- pci_fixup_header, /* Called immediately after reading configuration header */
+ pci_fixup_early, /* Before probing BARs */
+ pci_fixup_header, /* After reading configuration header */
pci_fixup_final, /* Final phase of device fixups */
pci_fixup_enable, /* pci_enable_device() time */
};
/* Anonymous variables would be nice... */
-#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_header"))) = { \
- vendor, device, hook };
-
-#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_final"))) = { \
- vendor, device, hook };
-
-#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_enable"))) = { \
- vendor, device, hook };
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \
+ static struct pci_fixup __pci_fixup_##name __attribute_used__ \
+ __attribute__((__section__(#section))) = { vendor, device, hook };
+#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
+ vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
next prev parent reply other threads:[~2004-11-12 23:25 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-12 23:20 [BK PATCH] PCI fixes for 2.6.10-rc1 Greg KH
2004-11-12 23:21 ` [PATCH] " Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH [this message]
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-13 9:12 ` Russell King
2004-11-13 10:03 ` Jan Dittmer
2004-11-13 10:22 ` Russell King
2004-11-13 10:45 ` Jan Dittmer
2004-11-13 10:48 ` Russell King
2004-11-13 10:58 ` Jan Dittmer
-- strict thread matches above, loose matches on Subject: below --
2004-11-13 7:33 James Tabor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11003017162945@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.