From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] role change not allowed when connecting with PAND
Date: Mon, 13 Dec 2004 21:07:14 +0100 [thread overview]
Message-ID: <1102968434.2143.19.camel@pegasus> (raw)
In-Reply-To: <200412132025.29208.wim.delvaux@adaptiveplanet.com>
Hi Wim,
> When I run
>
> pand --connect XXXX --persist
>
> and my server runs
>
> pand --listen --role NAP
>
> and hciconfig -a on the client shows (Had to type this over)
>
> link policy : RSWITCH, HOLD PARK SNIFF
> link mode : SLAVE ACCEPT
> Features : 0xff 0xff 0x05 0x00
>
> and on the server it shows
>
> hci0: Type: USB
> BD Address: 00:60:57:02:71:A2 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:4704 acl:33 sco:0 events:445 errors:0
> TX bytes:12193 acl:111 sco:0 commands:128 errors:0
> Features: 0xff 0xff 0x09 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: ACCEPT MASTER
> Name: 'buro-0'
> Class: 0x100000
> Service Classes: Object Transfer
> Device Class: Miscellaneous,
> HCI Ver: 1.1 (0x1) HCI Rev: 0xbc LMP Ver: 1.1 (0x1) LMP Subver: 0xbc
> Manufacturer: Cambridge Silicon Radio (10)
>
> I get the following HCIDUMP -x output
>
> HCIDump - HCI packet analyzer ver 1.12
> device: hci0 snap_len: 1028 filter: 0xffffffff
> > HCI Event: Connect Request (0x04) plen 10
> 96 85 0D C7 02 00 12 01 12 01
> < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> 96 85 0D C7 02 00 00
> > HCI Event: Command Status (0x0f) plen 4
> 00 01 09 04
> > HCI Event: Role Change (0x12) plen 8
> 21 96 85 0D C7 02 00 01
> > HCI Event: Link Key Request (0x17) plen 6
> 96 85 0D C7 02 00
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> 96 85 0D C7 02 00 72 97 A4 D0 A0 3A D3 4E E8 50 A4 46 46 F0
> 8A A1
> > HCI Event: Command Complete (0x0e) plen 10
> 01 0B 04 0C 96 85 0D C7 02 00
> > HCI Event: Connect Complete (0x03) plen 11
> 21 28 00 96 85 0D C7 02 00 01 00
> > HCI Event: Connect Request (0x04) plen 10
> 96 85 0D C7 02 00 12 01 12 01
> < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> 96 85 0D C7 02 00 00
> > HCI Event: Command Status (0x0f) plen 4
> 00 01 09 04
> > HCI Event: Role Change (0x12) plen 8
> 21 96 85 0D C7 02 00 01
> > HCI Event: Link Key Request (0x17) plen 6
> 96 85 0D C7 02 00
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> 96 85 0D C7 02 00 72 97 A4 D0 A0 3A D3 4E E8 50 A4 46 46 F0
> 8A A1
> > HCI Event: Command Complete (0x0e) plen 10
> 01 0B 04 0C 96 85 0D C7 02 00
> > HCI Event: Connect Complete (0x03) plen 11
> 21 29 00 96 85 0D C7 02 00 01 00
> > HCI Event: Connect Request (0x04) plen 10
> 96 85 0D C7 02 00 12 01 12 01
> < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> 96 85 0D C7 02 00 00
> > HCI Event: Command Status (0x0f) plen 4
> 00 01 09 04
> > HCI Event: Role Change (0x12) plen 8
> 21 96 85 0D C7 02 00 01
> > HCI Event: Link Key Request (0x17) plen 6
> 96 85 0D C7 02 00
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> 96 85 0D C7 02 00 72 97 A4 D0 A0 3A D3 4E E8 50 A4 46 46 F0
> 8A A1
> > HCI Event: Command Complete (0x0e) plen 10
> 01 0B 04 0C 96 85 0D C7 02 00
> > HCI Event: Connect Complete (0x03) plen 11
> 21 28 00 96 85 0D C7 02 00 01 00
>
>
> Why don't I get a connection ?
you still have security mode 3 on one side. Disable the "auth" and/or
"encrypt" and try again. Don't set the master link mode on device level,
because pand has a --master for this case.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2004-12-13 20:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-13 19:25 [Bluez-users] role change not allowed when connecting with PAND wim delvaux
2004-12-13 20:07 ` Marcel Holtmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1102968434.2143.19.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.