From: Erwin Authried <eauth@softsys.co.at>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] pand connection to XP SP2 fails
Date: Tue, 14 Dec 2004 12:57:39 +0100 [thread overview]
Message-ID: <1103025459.4095.68.camel@justakiss> (raw)
In-Reply-To: <1103024932.2143.156.camel@pegasus>
[-- Attachment #1: Type: text/plain, Size: 908 bytes --]
Am Die, den 14.12.2004 schrieb Marcel Holtmann um 12:48:
> Hi Erwin,
>
> > I want to establish a pand connection to XP/SP2 with a MSI-6967 dongle.
> > I have installed the MSI driver for WinXP with SP2. The client is a
> > Laptop with a CBT100C card, Linux 2.4.22-mh7, bluez-libs+utils 2.12.
> > When I try to connect to the XP box with
> > pand --role PANU -c <ADR>
> > Windows is asking for the Pin. After entering the correct pin, I'm
> > always getting the following pand error:
> >
> > ...
> > pand[15249]: Connecting to <ADR>
> > hcid[15183]: link_key_request (sba=..., dab=...)
> > pand[15249]: Connect to <ADR> failed. Protocol error(71)
> >
> > I'm able to connect to a PC running Bluez with the same setup.
>
> show us the output of "hcidump -X" (as root) while your are connecting.
>
> Regards
>
> Marcel
>
I have attached the output of "hciconfig -a" and "hcidump -x"
Regards,
Erwin
[-- Attachment #2: hciconfig.txt --]
[-- Type: text/plain, Size: 610 bytes --]
hci0: Type: UART
BD Address: 00:80:5A:20:F1:5B ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:5644 acl:48 sco:0 events:202 errors:0
TX bytes:5169 acl:42 sco:0 commands:89 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
[-- Attachment #3: dump.txt --]
[-- Type: text/plain, Size: 3463 bytes --]
HCIDump - HCI packet analyzer ver 1.16
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
4D 5D 48 76 0C 00 18 CC 02 00 00 00 01
> HCI Event: Command Status (0x0f) plen 4
00 01 05 04
> HCI Event: Role Change (0x12) plen 8
00 4D 5D 48 76 0C 00 01
> HCI Event: Connect Complete (0x03) plen 11
00 29 00 4D 5D 48 76 0C 00 01 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
29 00 0F 00
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
4D 5D 48 76 0C 00 01
> HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 29 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 1 status 0
> HCI Event: Link Key Request (0x17) plen 6
4D 5D 48 76 0C 00
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
4D 5D 48 76 0C 00
> HCI Event: Command Complete (0x0e) plen 10
01 0C 04 00 4D 5D 48 76 0C 00
> HCI Event: PIN Code Request (0x16) plen 6
4D 5D 48 76 0C 00
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
4D 5D 48 76 0C 00 04 31 32 33 34 00 00 00 00 00 00 00 00 00
00 00 00
> HCI Event: Command Complete (0x0e) plen 10
01 0D 04 00 4D 5D 48 76 0C 00
> HCI Event: Link Key Notification (0x18) plen 23
4D 5D 48 76 0C 00 97 24 3F 6E DA 91 C1 4F C5 62 6B 11 0B 27
38 3A 00
> HCI Event: Encrypt Change (0x08) plen 4
00 29 00 01
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 1691
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 1691
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 15]
BNEP: Control(0x01|0)
Setup Req(0x01) size 0x02 dst 0x1116(NAP) src 0x1115(PANU)
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 15]
BNEP: Control(0x01|0)
Setup Rsp(0x02) res 0x0001
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
29 00 13
> HCI Event: Command Status (0x0f) plen 4
00 01 06 04
> HCI Event: Disconn Complete (0x05) plen 4
00 29 00 16
next prev parent reply other threads:[~2004-12-14 11:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-14 11:46 [Bluez-users] pand connection to XP SP2 fails Erwin Authried
2004-12-14 11:48 ` Marcel Holtmann
2004-12-14 11:57 ` Erwin Authried [this message]
2004-12-14 12:55 ` [Bluez-users] " Sebastian Roth
2004-12-14 14:54 ` Erwin Authried
2004-12-15 10:42 ` Marcel Holtmann
2004-12-15 11:31 ` Erwin Authried
2004-12-15 11:36 ` Marcel Holtmann
2004-12-15 12:16 ` Erwin Authried
2004-12-15 12:21 ` Erwin Authried
2004-12-15 12:28 ` Marcel Holtmann
2004-12-14 21:39 ` [Bluez-users] " Michal Semler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1103025459.4095.68.camel@justakiss \
--to=eauth@softsys.co.at \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.