From: Michael De Groat <mpdegroat@numerica.us>
To: linux-ppp@vger.kernel.org
Subject: PPP not connecting to PoPToP server
Date: Wed, 05 Jan 2005 22:15:34 +0000 [thread overview]
Message-ID: <1104963334.4071.7.camel@nickel> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="windows-1254", Size: 7186 bytes --]
Hello:
When I run pptpconfig and try to connect to my server I get this in
debug:
pptpconfig: debug information dump begins
WARNING: security sensitive information follows
pptpconfig 1.2 2004/06/19 08:57:15
# pppd --version
pppd version 2.4.3
# uname -a
Linux zinc.numerica.us 2.6.8.1-12mdk #1 Fri Oct 1 12:53:41 CEST 2004
i686 Intel(R) Celeron(R) CPU 1.80GHz unknown GNU/Linux
# grep mppe /proc/modules
# modinfo ppp_mppe
Array
(
[name] => numerica
[server] => 216.17.193.45
[domain] =>
[username] => backup
[password] => (hidden by pptpconfig)
[pppd-options] =>
[pptp-options] =>
[resolv] => 192.168.2.253
[dns-options] =>
[routing] => routing_client_to_lan
[usepeerdns] =>
[require-mppe] =>
[nomppe-40] =>
[nomppe-128] =>
[refuse-eap] =>
[mppe-stateful] =>
[autostart] =>
[iconify] =>
[persist] => 1
[debug] => 1
[client-to-lan] => a:1:{s:14:"192.168.2.0/24";s:0:"";}
)
# route -n (before pppd)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0
eth0
pptpconfig: debug information dump ends, starting pppd
pppd options in effect:
debug # (from /etc/ppp/peers/numerica)
updetach # (from command line)
persist # (from /etc/ppp/peers/numerica)
logfd 1 # (from command line)
linkname numerica # (from /etc/ppp/peers/numerica)
dump # (from /etc/ppp/peers/numerica)
noauth # (from /etc/ppp/options.pptp)
name backup # (from /etc/ppp/peers/numerica)
remotename numerica # (from /etc/ppp/peers/numerica)
# (from /etc/ppp/options.pptp)
pty pptp 216.17.193.45 --nolaunchpppd # (from /etc/ppp/peers/numerica)
ipparam numerica # (from /etc/ppp/peers/numerica)
nobsdcomp # (from /etc/ppp/options.pptp)
nodeflate # (from /etc/ppp/options.pptp)
using channel 46
Using interface ppp0
pptpconfig: monitoring interface ppp0
Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xda1951eb> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1450> <asyncmap 0x0> <auth chap MS-v2>
<magic 0x8b34636> <pcomp> <accomp>]
LCP: timeout sending Config-Requests
Connection terminated.
On my PoPToP server, the log shows this:
Jan 5 21:55:07 smoothie pptpd[26324]: CTRL: Client 192.168.2.51 control
connection started
Jan 5 21:55:08 smoothie pptpd[26324]: CTRL: Starting call (launching
pppd, opening GRE)
Jan 5 21:55:08 smoothie modprobe: modprobe: Can't locate module
char-major-5
Jan 5 21:55:08 smoothie pppd[26326]: pppd 2.4.2 started by root, uid 0
Jan 5 21:55:08 smoothie pppd[26326]: Using interface ppp0
Jan 5 21:55:08 smoothie pppd[26326]: Connect: ppp0 <--> /dev/ttyp0
Jan 5 21:55:08 smoothie pppd[26326]: Warning - secret
file /etc/ppp/pap-secrets has world and/or group access
Jan 5 21:55:38 smoothie pppd[26326]: LCP: timeout sending
Config-Requests
Jan 5 21:55:38 smoothie pppd[26326]: Connection terminated.
Jan 5 21:55:38 smoothie pppd[26326]: Exit.
Jan 5 21:55:38 smoothie pptpd[26324]: GRE:
read(fd=5,buffer€4d580,len96) from PTY failed: status = -1 error Input/output error
Jan 5 21:55:38 smoothie pptpd[26324]: CTRL: PTY read or GRE write
failed (pty,gre)=(5,6)
Jan 5 21:55:38 smoothie pptpd[26324]: CTRL: Client 192.168.2.51 control
connection finished
Any suggestions on what's not working??? I'm using a MDK10.1 stock
workstation.
Thanks,
Michael
--
Michael De Groat, Jr.
IT Manager
Numerica Corporation
mpdegroat@numerica.us
Office: 970.419.8343, ext 13
Mobile: 970.567.0036
Numerica Disclaimer
This message and any attachments are intended only for the individual or
entity to which the message is addressed. It is confidential and may
contain privileged information. If you are neither the intended
recipient nor the agent responsible for delivering the message to the
intended recipient, you are hereby notified that any review,
retransmission, dissemination, or taking of any action in reliance upon,
the information in this communication is strictly prohibited, and may be
unlawful. If you feel you have received this communication in error,
please notify us immediately by returning this Email to the sender and
deleting it from your computer.
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
reply other threads:[~2005-01-05 22:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1104963334.4071.7.camel@nickel \
--to=mpdegroat@numerica.us \
--cc=linux-ppp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.