From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Revell Subject: Re: question about parameter settings. Date: Thu, 06 Jan 2005 11:23:09 -0500 Message-ID: <1105028590.15126.6.camel@krustophenia.net> References: Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from mustang.oldcity.dca.net (mustang.oldcity.dca.net [216.158.38.3]) by alsa.alsa-project.org (ALSA's E-mail Delivery System) with SMTP id EDE0B199 for ; Thu, 6 Jan 2005 17:23:12 +0100 (MET) In-Reply-To: Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Don Gulotta Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On Thu, 2005-01-06 at 07:40 -0600, Don Gulotta wrote: > I have a question about the parameters that need to be passed to CS46xx. > I am running Suse Linux 9.2 and it automatically finds the CS46xx but I > get no sound. I have looked at the Alsa documentation and the parameter > lists but don't know what the actual values should be. I only see three > to configure in Yast2 hardware config for the card yet I see 6 in the > documentation. I get the last three to configure. You really should not need to pass any parameters. Are you sure it's not a mixer settings issue? Lee ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt