From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rusty Phillips Subject: Re: Omnistudio USB Date: Wed, 12 Jan 2005 15:50:02 -0500 Message-ID: <1105563002.14697.45.camel@localhost> References: Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Okay, I've been trying most of my testing with the first two channels. However, I just figured out that recording and playback works on channels #3 and #4 at 96000. The first two are the best ones to get, though, because those are the ones with built-in preamps and XLR inputs. Note that even bypassing the preamps by going directly through the line-ins doesn't work, though. Clues? On Wed, 2005-01-12 at 10:02 +0100, Clemens Ladisch wrote: > Rusty Phillips wrote: > > I recently purchased one, and have been trying to find out > > anything I can about getting it to work. So far all I've gotten > > is playback on two channels at 48Khz with alsa (from the 2.6.10 > > kernel as well as from alsa CVS). > > What are the contents of /proc/asound/cardX/stream0? > Is there a second output device in the output of "aplay -l"? > > > Clemens > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt