From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Piconet problems
Date: Fri, 14 Jan 2005 22:18:55 +0100 [thread overview]
Message-ID: <1105737535.7525.48.camel@pegasus> (raw)
In-Reply-To: <IAAY31$664B7AA9753F60F7A4D5D72B66AB0F53@libero.it>
Hi Jers,
> > send us the outputs of "hciconfig -a" for all of your devices. And don't
> > play with "hcitool cc". If you wanna test stuff then use l2test.
>
> hci0: Type: USB
> BD Address: 00:08:E0:01:9E:86 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:653 acl:0 sco:0 events:19 errors:0
> TX bytes:314 acl:0 sco:0 commands:18 errors:0
> Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'PC A'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
> Manufacturer: Cambridge Silicon Radio (10)
>
> hci0: Type: USB
> BD Address: 00:E0:98:85:A1:64 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:99 acl:0 sco:0 events:13 errors:0
> TX bytes:296 acl:0 sco:0 commands:12 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175
> Manufacturer: Cambridge Silicon Radio (10)
the 0x175 firmwares are not HCI 16.4 and thus don't support scatternet
and are difficult to connect.
> > > After that, I tried to create the second connection on slave2 side by running the same command (hcitool cc
> <master_addr>) and I obtain the following error:
> > > # Can't create connectio: input/output error.
> >
> > Run "hcidump -x" as root and show us the output.
>
> HCIDump - HCI packet analyzer ver 1.16
> device: hci0 snap_len: 1028 filter: 0xffffffff
What about trying to connect now, so we see traffic?
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-01-14 21:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-14 10:21 [Bluez-users] Piconet problems jers
2005-01-14 21:18 ` Marcel Holtmann [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-07-18 18:27 Arlen Nascimento
2005-07-18 18:36 ` Marcel Holtmann
2005-01-24 11:14 jers
2005-01-24 12:25 ` Marcel Holtmann
2005-01-20 15:49 jers
2005-01-21 0:42 ` Marcel Holtmann
2005-01-20 11:33 jers
2005-01-20 12:52 ` Marcel Holtmann
2005-01-17 8:36 jers
2005-01-17 11:21 ` Marcel Holtmann
2005-01-13 13:13 jers
2005-01-13 14:39 ` Marcel Holtmann
2005-01-13 9:22 jers
2005-01-13 10:46 ` Marcel Holtmann
2005-01-11 11:19 jers
2005-01-11 10:40 jers
2005-01-11 10:52 ` Benoit Panizzon
2005-01-11 12:06 ` Marcel Holtmann
2004-12-21 13:28 jers
2004-12-21 13:56 ` Marcel Holtmann
2004-12-21 11:02 jers
2004-12-21 11:16 ` Marcel Holtmann
2004-12-21 20:21 ` blookk -
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1105737535.7525.48.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.