From: Alan Jenkins <aj504@student.cs.york.ac.uk>
To: linux-kernel@vger.kernel.org
Subject: 2.6.9 suspend-to-disk bug (during resume)
Date: Thu, 20 Jan 2005 08:49:45 +0000 [thread overview]
Message-ID: <1106210985l.8224l.0l@linux> (raw)
In-Reply-To: <1106210882.7975.9.camel@linux.site> (from aj504@student.cs.york.ac.uk on Thu Jan 20 08:48:02 2005)
On 20/01/05 08:48:02, Alan Jenkins wrote:
I have noticed a similar message, and so has someone else on the list:
http://groups-beta.google.com/group/fa.linux.kernel/browse_thread/thread/1bfcbbca2d508bb3/cb69d674510d215a?q=%22bad:+scheduling+while+atomic!%22+suspend&_done=%2Fgroup%2Ffa.linux.kernel%2Fsearch%3Fgroup%3Dfa.linux.kernel%26q%3D%22bad:+scheduling+while+atomic!%22+suspend%26qt_g%3D1%26searchnow%3DSearch+this+group%26&_doneTitle=Back+to+Search&&d#cb69d674510d215a
I have an asrock motherboard with an sis chipset.
SiS seems to be the common factor. I think its something general about
the chipset. My messages seem to involve the network card, the sound
card and the i8042 (ps/2 port) controller:
ohci_hcd 0000:00:03.0: remove, state 1
usb usb1: USB disconnect, address 1
ohci_hcd 0000:00:03.0: USB bus 1 deregistered
ohci_hcd 0000:00:03.1: remove, state 1
usb usb2: USB disconnect, address 1
usb 2-1: USB disconnect, address 3
drivers/usb/media/stv680.c: [usb_stv680_remove_disconnected:1467]
STV(i): STV0680 disconnected
ohci_hcd 0000:00:03.1: USB bus 2 deregistered
ehci_hcd 0000:00:03.2: remove, state 1
usb usb3: USB disconnect, address 1
ehci_hcd 0000:00:03.2: USB bus 3 deregistered
PM: suspend-to-disk mode set to 'shutdown'
Stopping tasks:
=====================================================================|
Freeing memory... \b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b
\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b
\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b
\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\bdone (39643 pages freed)
PM: Attempting to suspend to disk.
PM: snapshotting memory.
swsusp: critical section:
[nosave pfn 0x398]<7>[nosave pfn 0x399]swsusp: Need to copy 23546 pages
suspend: (pages needed: 23546 + 512 free: 41972)
[nosave pfn 0x398]<7>[nosave pfn 0x399]<7>PM: Image restored
successfully.
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 10 (level, low) -> IRQ 10
bad: scheduling while atomic!
[<c030164e>] schedule+0x4be/0x570
[<c011ce69>] call_console_drivers+0x79/0x110
[<c0124817>] __mod_timer+0x177/0x190
[<c0301b8a>] schedule_timeout+0x5a/0xb0
[<c0293ed9>] pci_conf1_read+0x109/0x110
[<c0125210>] process_timeout+0x0/0x10
[<d0de7f08>] snd_intel8x0_ich_chip_init+0x1a8/0x2c0 [snd_intel8x0]
[<c02932cd>] pcibios_set_master+0x1d/0x90
[<d0de8123>] snd_intel8x0_chip_init+0x13/0xc0 [snd_intel8x0]
[<d0de8418>] intel8x0_resume+0x28/0x100 [snd_intel8x0]
[<d0dfaba1>] snd_card_pci_resume+0x41/0x47 [snd]
[<c01fa5f2>] pci_device_resume+0x22/0x30
[<c0264756>] resume_device+0x16/0x20
[<c02647bb>] dpm_resume+0x5b/0x70
[<c02647e9>] device_resume+0x19/0x30
[<c01362f5>] finish+0x5/0x40
[<c0136448>] pm_suspend_disk+0x78/0xc0
[<c013489c>] enter_state+0x9c/0xa0
[<c0134a01>] state_store+0xd1/0xf0
[<c0134930>] state_store+0x0/0xf0
[<c018e786>] subsys_attr_store+0x36/0x50
[<c018e9db>] flush_write_buffer+0x2b/0x40
[<c018ea2e>] sysfs_write_file+0x3e/0x60
[<c0157840>] vfs_write+0xb0/0x110
[<c0157951>] sys_write+0x41/0x70
[<c0106079>] sysenter_past_esp+0x52/0x71
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:03.2[D] -> GSI 3 (level, low) -> IRQ 3
bad: scheduling while atomic!
[<c030164e>] schedule+0x4be/0x570
[<c0301b8a>] schedule_timeout+0x5a/0xb0
[<c029542a>] pci_write+0x2a/0x30
[<c0125210>] process_timeout+0x0/0x10
[<c01255bf>] msleep+0x1f/0x30
[<c01f8c15>] pci_set_power_state+0x155/0x180
[<d083c466>] sis900_resume+0x56/0x110 [sis900]
[<c01fa5f2>] pci_device_resume+0x22/0x30
[<c0264756>] resume_device+0x16/0x20
[<c02647bb>] dpm_resume+0x5b/0x70
[<c02647e9>] device_resume+0x19/0x30
[<c01362f5>] finish+0x5/0x40
[<c0136448>] pm_suspend_disk+0x78/0xc0
[<c013489c>] enter_state+0x9c/0xa0
[<c0134a01>] state_store+0xd1/0xf0
[<c0134930>] state_store+0x0/0xf0
[<c018e786>] subsys_attr_store+0x36/0x50
[<c018e9db>] flush_write_buffer+0x2b/0x40
[<c018ea2e>] sysfs_write_file+0x3e/0x60
[<c0157840>] vfs_write+0xb0/0x110
[<c0157951>] sys_write+0x41/0x70
[<c0106079>] sysenter_past_esp+0x52/0x71
bad: scheduling while atomic!
[<c030164e>] schedule+0x4be/0x570
[<c01f6329>] __delay+0x9/0x10
[<c028370a>] do_rw_taskfile+0x1fa/0x250
[<c03017c8>] wait_for_completion+0x78/0xe0
[<c01196a0>] default_wake_function+0x0/0x10
[<c01196a0>] default_wake_function+0x0/0x10
[<c027f659>] ide_do_drive_cmd+0xf9/0x150
[<c027c97c>] generic_ide_resume+0x8c/0xb0
[<c02838c0>] task_no_data_intr+0x0/0xa0
[<c0259bd9>] i8042_controller_resume+0x59/0x100
[<c0264756>] resume_device+0x16/0x20
[<c02647bb>] dpm_resume+0x5b/0x70
[<c02647e9>] device_resume+0x19/0x30
[<c01362f5>] finish+0x5/0x40
[<c0136448>] pm_suspend_disk+0x78/0xc0
[<c013489c>] enter_state+0x9c/0xa0
[<c0134a01>] state_store+0xd1/0xf0
[<c0134930>] state_store+0x0/0xf0
[<c018e786>] subsys_attr_store+0x36/0x50
[<c018e9db>] flush_write_buffer+0x2b/0x40
[<c018ea2e>] sysfs_write_file+0x3e/0x60
[<c0157840>] vfs_write+0xb0/0x110
[<c0157951>] sys_write+0x41/0x70
[<c0106079>] sysenter_past_esp+0x52/0x71
Restarting tasks...<3>bad: scheduling while atomic!
[<c030164e>] schedule+0x4be/0x570
[<c0118c1c>] activate_task+0x4c/0x60
[<c0118d12>] try_to_wake_up+0xa2/0xb0
[<c0134d6a>] thaw_processes+0xda/0xf0
[<c02647bb>] dpm_resume+0x5b/0x70
[<c0136303>] finish+0x13/0x40
[<c0136448>] pm_suspend_disk+0x78/0xc0
[<c013489c>] enter_state+0x9c/0xa0
[<c0134a01>] state_store+0xd1/0xf0
[<c0134930>] state_store+0x0/0xf0
[<c018e786>] subsys_attr_store+0x36/0x50
[<c018e9db>] flush_write_buffer+0x2b/0x40
[<c018ea2e>] sysfs_write_file+0x3e/0x60
[<c0157840>] vfs_write+0xb0/0x110
[<c0157951>] sys_write+0x41/0x70
[<c0106079>] sysenter_past_esp+0x52/0x71
done
bad: scheduling while atomic!
[<c030164e>] schedule+0x4be/0x570
[<c0157951>] sys_write+0x41/0x70
[<c01060f2>] work_resched+0x5/0x16
bad: scheduling while atomic!
[<c030164e>] schedule+0x4be/0x570
[<c011a040>] sys_sched_yield+0x40/0x50
[<c01630cb>] coredump_wait+0x2b/0x90
[<c01631fa>] do_coredump+0xca/0x1e5
[<c0118c1c>] activate_task+0x4c/0x60
[<c0118d12>] try_to_wake_up+0xa2/0xb0
[<c0125ed5>] __dequeue_signal+0xf5/0x160
[<c0125f63>] dequeue_signal+0x23/0x90
[<c0127b6d>] get_signal_to_deliver+0x26d/0x360
[<c0105e2f>] do_signal+0x8f/0x160
[<c0118a67>] recalc_task_prio+0xf7/0x260
[<c030148f>] schedule+0x2ff/0x570
[<c0117150>] do_page_fault+0x0/0x607
[<c0105f37>] do_notify_resume+0x37/0x3c
[<c0106116>] work_notifysig+0x13/0x15
note: do_acpi_sleep[7075] exited with preempt_count 1
alps.c: E6 report: 00 00 64
alps.c: E7 report: 10 00 64
evdev_connect: evdev cd92ade0 handle cd92adfc name event1
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
eth0: Abnormal interrupt,status 0x03008001.
eth0: Media Link On 10mbps half-duplex
ACPI: PCI interrupt 0000:00:03.2[D] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: irq 3, pci mem d0860000
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24.10-default ehci_hcd
usb usb1: SerialNumber: 0000:00:03.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 10, pci mem d0862000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: irq 10, pci mem d0c1a000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24.10-default ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: wakeup
usb 3-1: new full speed USB device using address 2
usb 3-1: Product: USB Dual-mode Camera
usb 3-1: Manufacturer: STMicroelectronics
drivers/usb/media/stv680.c: [stv680_probe:1396] STV(i): STV0680 camera
found.
drivers/usb/media/stv680.c: [stv680_probe:1434] STV(i): registered new
video device: video0
next parent reply other threads:[~2005-01-20 8:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1106210882.7975.9.camel@linux.site>
2005-01-20 8:49 ` Alan Jenkins [this message]
2005-01-20 9:19 ` 2.6.9 suspend-to-disk bug (during resume) Rafael J. Wysocki
2005-01-21 9:45 ` Alan Jenkins
2005-01-20 14:58 ` Pavel Machek
2005-01-21 9:08 ` Alan Jenkins
2005-01-21 10:39 ` Pavel Machek
2005-01-21 13:18 ` Alan Jenkins
2004-10-24 13:13 andreoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1106210985l.8224l.0l@linux \
--to=aj504@student.cs.york.ac.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.