Re: [Bluez-users] Bluez BNEP connection close

[Marcel Holtmann <marcel@holtmann.org>]

Hi George,

>  >is the SCO support for the hci_usb driver compiled in? Maybe this takes
>  >away the USB bandwidth and this can result in troubles with a 2.4 kernel
>  >and its USB subsystem. With a 2.6 kernel you can disable this with the
>  >module parameter isoc, but I doubt that this is possible with a 2.4
>  >kernel.
> 
> Great... I have the SCO support compiled. So you recommend that I remove it???
> 
> I will do so and hope it works ;)

you don't need to remove the general SCO support, but need to deactivate
the checkbox for SCO support in the hci_usb driver. Take a look at the
file /proc/bus/usb/devices and see if the ISOC endpoints are claimed.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users