From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] D-Link DWB-120M and BlueZ 2.14 From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <200501282151.ALQ50969@ms12.netsolmail.com> References: <200501282151.ALQ50969@ms12.netsolmail.com> Content-Type: text/plain Message-Id: <1106961215.10580.5.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 29 Jan 2005 02:13:35 +0100 Hi Chris, > I installed bluez-libs-2.14 and bluez-utils-2.14 on a linux 2.4.26 system. I > also installed the BCM2033-FW.bin and BCM2033-MD.hex files in both / > lib/firmware and /usr/lib/hotplug/firmware. The bluez kernel module > loads, and I can see stuff like this in the messages log when I unplug and > plug in the device and start the hcid daemon: > > Jan 28 12:23:59 krank kernel: usb.c: deregistering driver hci_usb > Jan 28 12:24:14 krank kernel: BlueZ Core ver 2.3 Copyright (C) 2000,2001 > Qualcomm Inc > Jan 28 12:24:14 krank kernel: Written 2000,2001 by Maxim Krasnyansky > > Jan 28 12:24:31 krank kernel: BlueZ HCI USB driver ver 2.5 Copyright > (C) 2000,2001 Qualcomm Inc > Jan 28 12:24:31 krank kernel: Written 2000,2001 by Maxim Krasnyansky > > Jan 28 12:24:31 krank kernel: usb.c: registered new driver hci_usb > Jan 28 12:25:13 krank kernel: usb.c: USB disconnect on device 00:04.2-2 > address 2 > Jan 28 12:25:17 krank kernel: hub.c: new USB device 00:04.2-2, assigned > address 3 > Jan 28 12:36:49 krank -- MARK -- > Jan 28 12:39:06 krank hcid[1025]: Bluetooth HCI daemon > > However, when I do a 'hcitool dev' it doesn't see anything- it just says > "Devices:" and then nothing. If I run lsusb it says: > > Bus 001 Device 001: ID 0000:0000 > Bus 001 Device 003: ID 0a5c:2033 Broadcom Corp. BCM2033 Bluetooth > > What'd I do wrong? on a system with a 2.4 kernel you need the bcm203x utility. You must enable when compiling bluez-utils. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users