From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Re: F8T001 version 1 and SuSE 9.2 From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: References: <1107118147.8384.12.camel@pegasus> Content-Type: text/plain Message-Id: <1107121540.8384.23.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 30 Jan 2005 22:45:40 +0100 Hi, > T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0a5c ProdID=2033 Rev= 0.a0 > C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms this is the Broadcom 2033 dongle that needs a firmware download before it will work as H:2 dongle. You must install the bluez-firmware package and make sure that the bcm203x kernel driver is loaded. You can also call dmesg and check for an error message, because there must be one if the firmware isn't found. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users