VT82C686 and MIDI fun

[Chris White <chriswhite@gentoo.org>]

[-- Attachment #1: Type: text/plain, Size: 978 bytes --]

Alright, so I thought I send this here just in case I RTFM wrong :P.  So
basically, here's the deal.. I'm on a ppc system (2.6.9 kernel) using
alsa driver 1.0.8 (latest), via82xx module (Via being the vendor, my
model being in the subject line), and all a nice midi keyboard hooked up
to the MIDI/Gameport with an adapater I got.  Now, I've tried the
following without much success:

1) I did the `modprobe snd-via82xx mpu_port=0x330` command to set the
mpu port, which is what it's documented as, /dev/midi does nothing
2) Ok, maybe my setup is jacked, so I tried hooking it up to my x86
system, works like a charm
3) I looked over the documentation.. which tells me to work with
snd-mpu401.. but I thought that was depricated by snd-mpu401-uart?

So.. that said.. I'm stuck here wondering what's going on.  It's either
a) go buy a card or b) there's some serious endian going on.
Comments/suggestions/flames welcome (though wait till I get the firesuit
on).

[-- Attachment #2: このメッセージにはデジタル署名された部分があります --]
[-- Type: application/pgp-signature, Size: 189 bytes --]