All of lore.kernel.org
 help / color / mirror / Atom feed
From: "B.G. Bruce" <bgb@nt-nv.com>
To: xen-devel <xen-devel@lists.sourceforge.net>
Subject: VNET - full update
Date: Wed, 09 Feb 2005 17:49:58 -0400	[thread overview]
Message-ID: <1107985798.9884.367.camel@master.vms.security> (raw)

[-- Attachment #1: Type: text/plain, Size: 251 bytes --]

I would like to revoke my patch from earlier today for vnets and instead
submit the attached patch in it's place as a full update that allows
vnets to compile and run under 2.6.10/xen-testing.

PATCH: vnet-cleanup.patch
Signed off by:  bgb@nt-nv.com


[-- Attachment #2: vnet-cleanup.patch --]
[-- Type: text/x-patch, Size: 6987 bytes --]

diff -ruN xen-2.0-testing.bk/tools/vnet/INSTALL xen/tools/vnet/INSTALL
--- xen-2.0-testing.bk/tools/vnet/INSTALL	1969-12-31 20:00:00.000000000 -0400
+++ xen/tools/vnet/INSTALL	2005-02-09 17:43:33.050255000 -0400
@@ -0,0 +1,31 @@
+To compile and install run "make install"; if it fails or you need to reinstall 
+run "make clean" first or the build will fail, at least that is what I have 
+found under 2.6.10.
+
+Other important items:
+1)	You will need to have your xen0 kernel compiled with HMAC_SUPPORT 
+	2.6.x = (MAIN MENU: Cryptographic Options -> HMAC Support)
+	BEFORE running "make install".
+
+2)	You will want at least some of the other alogorithms listed under
+	"Cryptographic Options" for the kernel compiled as modules.
+
+3)	You will want the networking IPsec/VLAN options compiled in as modules
+	2.6.x = (MAIN MENU: Device Drivers -> Networking Support -> 
+				Networking Options ->
+					IP: AH transformation
+					IP: ESP transformation
+					IP: IPComp transformation 
+					IP: tunnel transformation
+
+					IPsec user configuration interface
+	
+					802.1Q VLAN Support
+
+4)	The module (vnet_module) will not properly load from the command line
+	with a "modprobe vnet_module".  Use network-vnet to properly configure
+	your system and load the module for you.
+
+Please refer to the additional documentation found in tools/vnet/doc for
+proper syntax and config file parameters.
+
diff -ruN xen-2.0-testing.bk/tools/vnet/Makefile xen/tools/vnet/Makefile
--- xen-2.0-testing.bk/tools/vnet/Makefile	2005-01-31 20:38:33.000000000 -0400
+++ xen/tools/vnet/Makefile	2005-02-09 13:39:34.000000000 -0400
@@ -12,6 +12,7 @@
 all: compile
 
 compile: vnetd vnet-module
+#compile: vnet-module
 
 gc.tar.gz:
 	wget http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/$@
@@ -20,10 +21,8 @@
 	tar xfz gc.tar.gz
 	ln -sf gc?.? gc
 
-gc/Makefile:
-	(cd gc && ./configure --prefix=`pwd`/install)
-
-gc-install: gc gc/Makefile
+gc-install: gc 
+	(cd gc && make test && ./configure --prefix=`pwd`/install)
 	make -C gc
 	make -C gc install
 
@@ -47,5 +46,6 @@
 clean:
 	-$(MAKE) -C vnetd clean
 	-$(MAKE) -C vnet-module clean
-
+	-rm -rf gc?.? gc
+	
 pristine: clean gc-pristine
diff -ruN xen-2.0-testing.bk/tools/vnet/vnet-module/Makefile-2.6 xen/tools/vnet/vnet-module/Makefile-2.6
--- xen-2.0-testing.bk/tools/vnet/vnet-module/Makefile-2.6	2005-01-31 20:38:33.000000000 -0400
+++ xen/tools/vnet/vnet-module/Makefile-2.6	2005-02-09 14:56:55.000000000 -0400
@@ -38,8 +38,8 @@
 
 .PHONY: install install-module modules_install
 install install-module modules_install: module
-	install -m 0755 -d $(DESTDIR)$(KERNEL_MODULE_DIR)
-	install -m 0554 $(KERNEL_MODULE) $(DESTDIR)$(KERNEL_MODULE_DIR)
+	install -m 0755 -d $(DESTDIR)$(KERNEL_MODULE_DIR)/xen
+	install -m 0554 $(KERNEL_MODULE) $(DESTDIR)$(KERNEL_MODULE_DIR)/xen
 
 .PHONY: clean
 clean:
diff -ruN xen-2.0-testing.bk/tools/vnet/vnet-module/if_varp.h xen/tools/vnet/vnet-module/if_varp.h
--- xen-2.0-testing.bk/tools/vnet/vnet-module/if_varp.h	2005-01-31 20:38:33.000000000 -0400
+++ xen/tools/vnet/vnet-module/if_varp.h	2005-02-09 14:03:46.000000000 -0400
@@ -36,7 +36,7 @@
 } __attribute__((packed)) VnetMsgHdr;
 
 typedef struct VarpHdr {
-    VnetMsgHdr;
+    VnetMsgHdr vnetmsghdr;
     uint32_t vnet;
     Vmac vmac;
     uint32_t addr;
@@ -50,4 +50,4 @@
 
 
 
-#endif /* ! _VNET_IF_VARP_H */
+#endif  /* ! _VNET_IF_VARP_H */
diff -ruN xen-2.0-testing.bk/tools/vnet/vnet-module/varp.c xen/tools/vnet/vnet-module/varp.c
--- xen-2.0-testing.bk/tools/vnet/vnet-module/varp.c	2005-01-31 20:38:33.000000000 -0400
+++ xen/tools/vnet/vnet-module/varp.c	2005-02-09 14:22:47.000000000 -0400
@@ -368,8 +368,8 @@
     // Varp header.
     varph = (void*)skb_put(skbout, varp_n);
     *varph = (VarpHdr){};
-    varph->id                = htons(VARP_ID);
-    varph->opcode            = htons(opcode);
+    varph->vnetmsghdr.id     = htons(VARP_ID);
+    varph->vnetmsghdr.opcode = htons(opcode);
     varph->vnet              = htonl(vnet);
     varph->vmac              = *vmac;
     varph->addr              = saddr;
@@ -1076,9 +1076,9 @@
         goto exit;
     }
     mine = 1;
-    if(varph->id != htons(VARP_ID)){
+    if(varph->vnetmsghdr.id != htons(VARP_ID)){
         // It's not varp at all - ignore it.
-        wprintf("> Unknown id: %d \n", ntohs(varph->id));
+        wprintf("> Unknown id: %d \n", ntohs(varph->vnetmsghdr.id));
         goto exit;
     }
     if(1){
@@ -1086,13 +1086,13 @@
                 NIPQUAD(skb->nh.iph->saddr), NIPQUAD(skb->nh.iph->daddr));
         dprintf("> sport=%u dport=%u\n", ntohs(skb->h.uh->source), ntohs(skb->h.uh->dest));
         dprintf("> opcode=%d vnet=%u vmac=" MACFMT " addr=" IPFMT "\n",
-                ntohs(varph->opcode),
+                ntohs(varph->vnetmsghdr.opcode),
                 ntohl(varph->vnet),
                 MAC6TUPLE(varph->vmac.mac),
                 NIPQUAD(varph->addr));
         varp_dprint();
     }
-    switch(ntohs(varph->opcode)){
+    switch(ntohs(varph->vnetmsghdr.opcode)){
     case VARP_OP_REQUEST:
         err = varp_handle_request(skb, varph);
         break;
@@ -1100,7 +1100,7 @@
         err = varp_handle_announce(skb, varph);
         break;
     default:
-        wprintf("> Unknown opcode: %d \n", ntohs(varph->opcode));
+        wprintf("> Unknown opcode: %d \n", ntohs(varph->vnetmsghdr.opcode));
        break;
     }
   exit:
diff -ruN xen-2.0-testing.bk/tools/vnet/vnetd/vcache.c xen/tools/vnet/vnetd/vcache.c
--- xen-2.0-testing.bk/tools/vnet/vnetd/vcache.c	2005-01-31 20:38:33.000000000 -0400
+++ xen/tools/vnet/vnetd/vcache.c	2005-02-09 14:13:59.000000000 -0400
@@ -102,11 +102,11 @@
     int varp_n = sizeof(VarpHdr);
     VarpHdr varph = {};
 
-    varph.id     = htons(VARP_ID);
-    varph.opcode = htons(opcode);
-    varph.vnet   = vnet;
-    varph.vmac   = *vmac;
-    varph.addr   = addr;
+    varph.vnetmsghdr.id     = htons(VARP_ID);
+    varph.vnetmsghdr.opcode = htons(opcode);
+    varph.vnet              = vnet;
+    varph.vmac              = *vmac;
+    varph.addr              = addr;
 
     if(0){
         struct sockaddr_in self;
@@ -503,7 +503,7 @@
  * @param local whether it's local or not
  */
 void vcache_forward_varp(VarpHdr *varph, int local){
-    uint16_t opcode = ntohs(varph->opcode);
+    uint16_t opcode = ntohs(varph->vnetmsghdr.opcode);
     if(local){
         ConnList *l;
         for(l = vnetd->connections; l; l = l->next){
@@ -611,7 +611,7 @@
         dprintf("> opcode=%d vnet=%u vmac=" MACFMT "\n",
                 ntohs(varph->opcode), ntohl(varph->vnet), MAC6TUPLE(varph->vmac.mac));
     }
-    switch(ntohs(varph->opcode)){
+    switch(ntohs(varph->vnetmsghdr.opcode)){
     case VARP_OP_REQUEST:
         err = vcache_handle_request(msg, varph, local);
         break;

             reply	other threads:[~2005-02-09 21:49 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-09 21:49 B.G. Bruce [this message]
2005-02-10 10:28 ` VNET - full update Mike Wray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1107985798.9884.367.camel@master.vms.security \
    --to=bgb@nt-nv.com \
    --cc=xen-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.