Re: ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device

[Sergio Monteiro Basto <sergio@sergiomb.no-ip.org>]

with hdc=scsi haldeamon doesn't recognize cdwriter.
but with hdc=ide-scsi (was the original from kernel 2.4) haldaamon
reconize my cdwriter !

So this message of this subject just make me wast my time and lose my
patience. ( because I forgot to enable haldaemon before to try
understand the message ) 
Still don't understand if I should or not change to ide-cd on my FC3, if
not please remove the message, if yes rewrite it please .

thanks for your precious time.

On Tue, 2005-02-15 at 20:36 +0000, Sergio Monteiro Basto wrote:
> Well the problem for the common users is the haldeamon doesn't recognize
> automatically /dev/scd0 and /etc/fstab don't have any entry about it.
> 
> So with hdc=scsi, how I read cds on hdc ?
> 
> thanks,
> 
> Note: I am using last updates of FC3, after upgrade from FC1. 
> 
> 
> On Tue, 2005-02-15 at 17:02 +0000, Alan Cox wrote:
> > On Maw, 2005-02-15 at 02:25, Randy.Dunlap wrote:
> > > It means:  don't use the ide-scsi driver.  Support for it is
> > > lagging (not well-maintained) because it's really not needed for
> > > burning CDs.  Just use the ide-cd driver (module) and
> > > specify the CD burner device as /dev/hdX.
> > 
> > This information is unfortunately *WRONG*. The base 2.6 ide-cd driver is
> > vastly inferior to ide-scsi. The ide-scsi layer knows about proper error
> > reporting, end of media and other things that ide-cd does not.
> > 
> > The -ac ide-cd knows some of the stuff that ide-cd needs to and works
> > with various drive/disk combinations the base code doesn't but ide-scsi
> > still handles CD's better.
> > 
> > Alan
> > 
-- 
Sérgio M.B.