From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Problems with a Broadcom USB Bluetooth Adapter From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <422860FF.9080202@gmail.com> References: <422860FF.9080202@gmail.com> Content-Type: text/plain Message-Id: <1109943266.8058.35.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 04 Mar 2005 14:34:26 +0100 Hi Fabio, > I'm trying to use my bluetooth adapter with a Linux box (Debian Sarge, > with kernel 2.6.10), but I found some problems. > > When I plug the adapter into the usb slot, the KDE Information Center > can see the new hardware as BCM2033 Bluetooth (class 224, usb version > 1.01, vendor id 0xa5c Broadcom, product id 0x2033 BCM2033 Bluetooth, > revision 0.a0, speed 12 Mbit/s). Anyway, I also installed (through > apt-get) KBluetoothD, but when I run it I get an error message saying: > "No working Bluetooth adapter found. Only local services will be > displayed". I also tried the hciconfig utility from root console, but > the output is nothing. > > My kernel is the 2.6.10 version, recompiled by me (I needed to do this > because I experienced many problems with the ACPI support). I think all > necessary modules are presents; the command "modprobe -l | grep > bluetooth" give me: > > /lib/modules/2.6.10/kernel/drivers/bluetooth/hci_uart.ko > /lib/modules/2.6.10/kernel/drivers/bluetooth/bfusb.ko > /lib/modules/2.6.10/kernel/drivers/bluetooth/bcm203x.ko > /lib/modules/2.6.10/kernel/drivers/bluetooth/hci_vhci.ko > /lib/modules/2.6.10/kernel/drivers/bluetooth/hci_usb.ko > /lib/modules/2.6.10/kernel/net/bluetooth/bluetooth.ko > /lib/modules/2.6.10/kernel/net/bluetooth/l2cap.ko > /lib/modules/2.6.10/kernel/net/bluetooth/sco.ko > /lib/modules/2.6.10/kernel/net/bluetooth/rfcomm/rfcomm.ko > /lib/modules/2.6.10/kernel/net/bluetooth/bnep/bnep.ko > > The command "lsmod" give me (mixed with other things): > > bluetooth 43780 5 hci_usb,rfcomm,l2cap > bcm203x 4736 0 > firmware_class 7936 1 bcm203x > usbcore 117624 6 bcm203x,hci_usb,ndiswrapper,usbhid,ohci_hcd > usbhid 40512 0 > ohci_hcd 32776 0 > > I also paste here the dmesg output, starting from the time when I plug > the adapter: > > hub 1-0:1.0: state 5 ports 4 chg fff0 evt 0002 > ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC > PPS CCS > hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 > PRSC PPS PES CCS > usb 1-1: new full speed USB device using ohci_hcd and address 3 > ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 > PRSC PPS PES CCS > usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 > usb 1-1: hotplug > usb 1-1: adding 1-1:1.0 (config #1, interface 0) > usb 1-1:1.0: hotplug > usb 1-1: adding 1-1:1.1 (config #1, interface 1) > usb 1-1:1.1: hotplug > usb 1-1: adding 1-1:1.2 (config #1, interface 2) > usb 1-1:1.2: hotplug > Bluetooth: HCI USB driver ver 2.7 > hci_usb 1-1:1.0: usb_probe_interface > hci_usb 1-1:1.0: usb_probe_interface - got id > hci_usb 1-1:1.1: usb_probe_interface > hci_usb 1-1:1.1: usb_probe_interface - got id > hci_usb 1-1:1.2: usb_probe_interface > hci_usb 1-1:1.2: usb_probe_interface - got id > usbcore: registered new driver hci_usb > bcm203x: Unknown symbol release_firmware > bcm203x: Unknown symbol request_firmware > Bluetooth: Broadcom Blutonium firmware driver ver 1.0 > bcm203x 1-1:1.0: usb_probe_interface > bcm203x 1-1:1.0: usb_probe_interface - got id > bcm203x_probe: Mini driver request failed > bcm203x: probe of 1-1:1.0 failed with error -5 > bcm203x 1-1:1.1: usb_probe_interface > bcm203x 1-1:1.1: usb_probe_interface - got id > bcm203x 1-1:1.2: usb_probe_interface > bcm203x 1-1:1.2: usb_probe_interface - got id > usbcore: registered new driver bcm203x install the bluez-firmware package. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users