From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Does the Trust BT180 (Broadcom 0x200a) work? and question on bnep0 device. From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <4235806E.4020008@gmx.it> References: <4235806E.4020008@gmx.it> Content-Type: text/plain Message-Id: <1110803012.629.5.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 14 Mar 2005 13:23:32 +0100 Hi Lorenzo, > 1) Does the Trust BT180 Class 1 Bluetooth Adapter work correctly, > without loading any firmware? it should work without loading any firmware. > 2) I tried to configure my Adapter so I could run ifconfing bnep0 .... > The only problem is that I don't have a bnep0 device. I read that I > need at list 2 working computers with a bluetooth adapter (working) > on both, and that I will have the bnep0 adapter only after I have run > > pand --connect xx:xx:xx:xx:xx:xx --service GN > > |__SERVER ADDRESS_| > > Is that true? On one side you need "pand --connect" on the other "pand --listen". > hciconfig : > > hci0: Type: USB > BD Address: 00:0B:0D:60:49:E8 ACL MTU: 377:10 SCO MTU: 16:0 > UP RUNNING PSCAN ISCAN AUTH ENCRYPT > RX bytes:338 acl:0 sco:0 events:48 errors:0 > TX bytes:1440 acl:0 sco:0 commands:46 errors:0 Don't use "auth" and "encrypt". Use the options of the pand server instead. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users