From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] sbcinfo.c frame_len problem? From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <42368844.7010000@xmission.com> References: <42368844.7010000@xmission.com> Content-Type: text/plain Message-Id: <1110872684.8820.3.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 15 Mar 2005 08:44:44 +0100 Hi Brad, > This was in an anonymous bug reported at the sf project. > > ===================================== > In sbcinfo.c, the frame_len is calculated incorrectly. > > 195: frame_len[0] = count + 4; > > The output of sbc_test_01.sbc results in: > > Frame length 46 Bytes > > instead of 42 (according to "A2DP Test v10.pdf"). > ===================================== > > should the "+ 4" be dropped? I have no idea, but the question is if the calculation shows always four bytes too much? Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel