From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, linux-pci@atrey.karlin.mff.cuni.cz
Cc: bjorn.helgaas@hp.com
Subject: [PATCH] PCI: trivial DBG tidy-up
Date: Fri, 1 Apr 2005 15:47:50 -0800 [thread overview]
Message-ID: <11123992702271@kroah.com> (raw)
In-Reply-To: <11123992703458@kroah.com>
ChangeSet 1.2181.16.8, 2005/03/17 13:50:00-08:00, bjorn.helgaas@hp.com
[PATCH] PCI: trivial DBG tidy-up
Tidy-up a bunch of PCI DBG output to use pci_name() when possible,
add domain when appropriate, remove redundancy, settle on one
style (DBG vs DBGC), etc.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/pci/hotplug.c | 10 ++++------
drivers/pci/probe.c | 13 +++++++------
drivers/pci/setup-bus.c | 25 ++++++++++++-------------
drivers/pci/setup-irq.c | 8 ++++----
drivers/pci/setup-res.c | 14 +++++++-------
5 files changed, 34 insertions(+), 36 deletions(-)
diff -Nru a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
--- a/drivers/pci/hotplug.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/hotplug.c 2005-04-01 15:37:39 -08:00
@@ -71,7 +71,8 @@
struct pci_dev_wrapped wrapped_dev;
int result = 0;
- DBG("scanning bus %02x\n", wrapped_bus->bus->number);
+ DBG("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus),
+ wrapped_bus->bus->number);
if (fn->pre_visit_pci_bus) {
result = fn->pre_visit_pci_bus(wrapped_bus, wrapped_parent);
@@ -106,8 +107,7 @@
struct pci_bus_wrapped wrapped_bus;
int result = 0;
- DBG("scanning bridge %02x, %02x\n", PCI_SLOT(wrapped_dev->dev->devfn),
- PCI_FUNC(wrapped_dev->dev->devfn));
+ DBG("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev));
if (fn->visit_pci_dev) {
result = fn->visit_pci_dev(wrapped_dev, wrapped_parent);
@@ -153,8 +153,7 @@
return result;
break;
default:
- DBG("scanning device %02x, %02x\n",
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ DBG("PCI: Scanning device %s\n", pci_name(dev));
if (fn->visit_pci_dev) {
result = fn->visit_pci_dev (wrapped_dev,
wrapped_parent);
@@ -169,4 +168,3 @@
return result;
}
EXPORT_SYMBOL(pci_visit_dev);
-
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/probe.c 2005-04-01 15:37:39 -08:00
@@ -422,7 +422,7 @@
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
- DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n",
+ DBG("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
pci_name(dev), buses & 0xffffff, pass);
/* Disable MasterAbortMode during probing to avoid reporting
@@ -559,8 +559,8 @@
dev->class = class;
class >>= 8;
- DBG("Found %02x:%02x [%04x/%04x] %06x %02x\n", dev->bus->number,
- dev->devfn, dev->vendor, dev->device, class, dev->hdr_type);
+ DBG("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
+ dev->vendor, dev->device, class, dev->hdr_type);
/* "Unknown power state" */
dev->current_state = 4;
@@ -815,7 +815,7 @@
unsigned int devfn, pass, max = bus->secondary;
struct pci_dev *dev;
- DBG("Scanning bus %02x\n", bus->number);
+ DBG("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
/* Go find them, Rover! */
for (devfn = 0; devfn < 0x100; devfn += 8)
@@ -825,7 +825,7 @@
* After performing arch-dependent fixup of the bus, look behind
* all PCI-to-PCI bridges on this bus.
*/
- DBG("Fixups for bus %02x\n", bus->number);
+ DBG("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
pcibios_fixup_bus(bus);
for (pass=0; pass < 2; pass++)
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -841,7 +841,8 @@
*
* Return how far we've got finding sub-buses.
*/
- DBG("Bus scan for %02x returning with max=%02x\n", bus->number, max);
+ DBG("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
+ pci_domain_nr(bus), bus->number, max);
return max;
}
diff -Nru a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
--- a/drivers/pci/setup-bus.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/setup-bus.c 2005-04-01 15:37:39 -08:00
@@ -29,9 +29,9 @@
#define DEBUG_CONFIG 1
#if DEBUG_CONFIG
-# define DBGC(args) printk args
+#define DBG(x...) printk(x)
#else
-# define DBGC(args)
+#define DBG(x...)
#endif
#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
@@ -151,8 +151,7 @@
struct pci_bus_region region;
u32 l, io_upper16;
- DBGC((KERN_INFO "PCI: Bus %d, bridge: %s\n",
- bus->number, pci_name(bridge)));
+ DBG(KERN_INFO "PCI: Bridge: %s\n", pci_name(bridge));
/* Set up the top and bottom of the PCI I/O segment for this bus. */
pcibios_resource_to_bus(bridge, ®ion, bus->resource[0]);
@@ -163,14 +162,14 @@
l |= region.end & 0xf000;
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
- DBGC((KERN_INFO " IO window: %04lx-%04lx\n",
- region.start, region.end));
+ DBG(KERN_INFO " IO window: %04lx-%04lx\n",
+ region.start, region.end);
}
else {
/* Clear upper 16 bits of I/O base/limit. */
io_upper16 = 0;
l = 0x00f0;
- DBGC((KERN_INFO " IO window: disabled.\n"));
+ DBG(KERN_INFO " IO window: disabled.\n");
}
/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
@@ -185,12 +184,12 @@
if (bus->resource[1]->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- DBGC((KERN_INFO " MEM window: %08lx-%08lx\n",
- region.start, region.end));
+ DBG(KERN_INFO " MEM window: %08lx-%08lx\n",
+ region.start, region.end);
}
else {
l = 0x0000fff0;
- DBGC((KERN_INFO " MEM window: disabled.\n"));
+ DBG(KERN_INFO " MEM window: disabled.\n");
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
@@ -204,12 +203,12 @@
if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- DBGC((KERN_INFO " PREFETCH window: %08lx-%08lx\n",
- region.start, region.end));
+ DBG(KERN_INFO " PREFETCH window: %08lx-%08lx\n",
+ region.start, region.end);
}
else {
l = 0x0000fff0;
- DBGC((KERN_INFO " PREFETCH window: disabled.\n"));
+ DBG(KERN_INFO " PREFETCH window: disabled.\n");
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
diff -Nru a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
--- a/drivers/pci/setup-irq.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/setup-irq.c 2005-04-01 15:37:39 -08:00
@@ -20,9 +20,9 @@
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
-# define DBGC(args) printk args
+#define DBG(x...) printk(x)
#else
-# define DBGC(args)
+#define DBG(x...)
#endif
@@ -53,8 +53,8 @@
irq = 0;
dev->irq = irq;
- DBGC((KERN_ERR "PCI fixup irq: (%s) got %d\n",
- dev->dev.kobj.name, dev->irq));
+ DBG(KERN_ERR "PCI: fixup irq: (%s) got %d\n",
+ dev->dev.kobj.name, dev->irq);
/* Always tell the device, so the driver knows what is
the real IRQ to use; the device does not use it. */
diff -Nru a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
--- a/drivers/pci/setup-res.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/setup-res.c 2005-04-01 15:37:39 -08:00
@@ -27,9 +27,9 @@
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
-# define DBGC(args) printk args
+#define DBG(x...) printk(x)
#else
-# define DBGC(args)
+#define DBG(x...)
#endif
@@ -42,10 +42,10 @@
pcibios_resource_to_bus(dev, ®ion, res);
- DBGC((KERN_ERR " got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
+ DBG(KERN_ERR " got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
"BAR %d of %s\n", res->start, res->end,
region.start, region.end, res->flags,
- resno, pci_name(dev)));
+ resno, pci_name(dev));
new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
if (res->flags & IORESOURCE_IO)
@@ -60,7 +60,7 @@
reg = dev->rom_base_reg;
} else {
/* Hmm, non-standard resource. */
- BUG();
+
return; /* kill uninitialised var warning */
}
@@ -85,9 +85,9 @@
}
}
res->flags &= ~IORESOURCE_UNSET;
- DBGC((KERN_INFO "PCI: moved device %s resource %d (%lx) to %x\n",
+ DBG(KERN_INFO "PCI: moved device %s resource %d (%lx) to %x\n",
pci_name(dev), resno, res->flags,
- new & ~PCI_REGION_FLAG_MASK));
+ new & ~PCI_REGION_FLAG_MASK);
}
int __devinit
next prev parent reply other threads:[~2005-04-02 0:40 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-01 23:45 [BK PATCH] PCI update for 2.6.12-rc1 Greg KH
2005-04-01 23:47 ` PCI: increase the size of the pci.ids strings Greg KH
2005-04-01 23:47 ` Remove item from feature-removal-schedule.txt that was already removed from the kernel Greg KH
2005-04-01 23:47 ` PCI: add CONFIG_PCI_NAMES to the feature-removal-schedule.txt file Greg KH
2005-04-01 23:47 ` [PATCH] PCI: sync up with the latest pci.ids file from sf.net Greg KH
2005-04-01 23:47 ` [PATCH] PCI: Add PCI device ID for new Mellanox HCA Greg KH
2005-04-01 23:47 ` [PATCH] PCI: Patch for Serverworks chips in hotplug environment Greg KH
2005-04-01 23:47 ` PCI: fix an oops in some pci devices on hotplug remove when their resources are being freed Greg KH
2005-04-01 23:47 ` Greg KH [this message]
2005-04-01 23:47 ` [PATCH] PCI Hotplug: remove code duplication in drivers/pci/hotplug/ibmphp_pci.c Greg KH
2005-04-01 23:47 ` [PATCH] PCI Hotplug: only call ibmphp_remove_resource() if argument is not NULL Greg KH
2005-04-01 23:47 ` [PATCH] PCI: 80 column lines Greg KH
2005-04-01 23:47 ` [PATCH] [PATCH] remove redundant devices list Greg KH
2005-04-01 23:47 ` [PATCH] PCI busses are structs, not integers Greg KH
2005-04-01 23:47 ` [PATCH] pci_ids.h correction for Intel ICH7M Greg KH
2005-04-01 23:47 ` [PATCH] sort-out-pci_rom_address_enable-vs-ioresource_rom_enable.patch Greg KH
2005-04-01 23:47 ` [PATCH] arch/i386/pci/i386.c: Use new for_each_pci_dev macro Greg KH
2005-04-01 23:47 ` PCI Hotplug: enforce the rule that a hotplug slot needs a release function Greg KH
2005-04-01 23:47 ` [PATCH] PCI Hotplug: add documentation about release pointer Greg KH
2005-04-01 23:47 ` [PATCH] PCI: Quirk for Asus M5N Greg KH
2005-04-01 23:47 ` [PATCH] drivers/pci/hotplug/cpqphp_core.c: fix a check after use Greg KH
2005-04-01 23:47 ` [PATCH] PCI: shrink drivers/pci/proc.c::pci_seq_start() Greg KH
2005-04-01 23:47 ` [PATCH] PCI: handle multiple video cards on the same bus Greg KH
2005-04-01 23:47 ` [PATCH] PCI: remove pci_find_device usage from pci sysfs code Greg KH
2005-04-01 23:47 ` [PATCH] drivers/pci/msi.c: fix a check after use Greg KH
2005-04-01 23:47 ` PCI: clean up the dynamic id logic a little bit Greg KH
2005-04-01 23:47 ` [PATCH] PCI: create PCI_DEBUG config option to make it easier for users to enable pci debugging Greg KH
2005-04-02 12:20 ` [PATCH] PCI Hotplug: remove code duplication in drivers/pci/hotplug/ibmphp_pci.c Rolf Eike Beer
2005-04-02 19:26 ` Andrew Morton
2005-04-08 0:07 ` Greg KH
2005-04-08 7:02 ` Rolf Eike Beer
2005-04-02 1:10 ` PCI: fix an oops in some pci devices on hotplug remove when their resources are being freed Matthew Wilcox
2005-04-02 3:31 ` Greg KH
2005-04-02 3:53 ` Matthew Wilcox
2005-04-02 4:04 ` Greg KH
2005-04-04 20:11 ` PCI: increase the size of the pci.ids strings Giuseppe Bilotta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11123992702271@kroah.com \
--to=gregkh@suse.de \
--cc=bjorn.helgaas@hp.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.