From: Detlev Casanova <detlev.casanova@collabora.com>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
Hans Verkuil <hverkuil@xs4all.nl>
Cc: "Arnd Bergmann" <arnd@arndb.de>,
"Jernej Škrabec" <jernej.skrabec@gmail.com>
Subject: Re: [GIT PULL FOR v6.9] Various fixes and enhancements
Date: Wed, 14 Feb 2024 11:40:49 -0500 [thread overview]
Message-ID: <11131784.CDJkKcVGEf@arisu> (raw)
In-Reply-To: <12e4850c-0ae2-4d9f-83b7-8c762e6e3756@xs4all.nl>
[-- Attachment #1: Type: text/plain, Size: 8317 bytes --]
Hi Hans,
I see that my visl patches on that branch are the v4. But I recently sent a
v5, fixing a checkpatch warning (but also fixed by you) and removing unnecessary
code changes: https://lore.kernel.org/linux-media/20240117151202.405426-1-detlev.casanova@collabora.com/
These are not big changes, so I don't mind keeping v4 and dropping v5 if that
is easier for you.
Regards,
Detlev
On Wednesday, February 14, 2024 10:17:54 A.M. EST Hans Verkuil wrote:
> If there are no comments, then I'll push this tomorrow or Friday.
>
> Regards,
>
> Hans
>
> The following changes since commit 8c64f4cdf4e6cc5682c52523713af8c39c94e6d5:
>
> media: edia: dvbdev: fix a use-after-free (2024-02-07 06:06:03 +0100)
>
> are available in the Git repository at:
>
> git://linuxtv.org/hverkuil/media_tree.git tags/br-v6.9d
>
> for you to fetch changes up to 10a934521ad37903bc290ed9b5fac5cd3c1e26a0:
>
> media: v4l: marvell: select CONFIG_V4L2_ASYNC where needed (2024-02-14
> 16:14:11 +0100)
>
> ----------------------------------------------------------------
> Tag branch
>
> ----------------------------------------------------------------
> Andrzej Pietrasiewicz (1):
> media: videobuf2: Add missing doc comment for waiting_in_dqbuf
>
> Arnd Bergmann (3):
> media: sta2x11: fix irq handler cast
> media: pvrusb2: fix pvr2_stream_callback casts
> media: v4l: marvell: select CONFIG_V4L2_ASYNC where needed
>
> Changhuang Liang (1):
> staging: media: starfive: Set 16 bpp for capture_raw device
>
> Colin Ian King (2):
> media: tda18271: remove redundant assignment to variable bcal
> media: i2c: st-vgxy61: remove redundant initialization of pointer mode
>
> Daniil Dulov (2):
> media: go7007: add check of return value of go7007_read_addr()
> media: pvrusb2: remove redundant NULL check
>
> Detlev Casanova (4):
> media: visl,vidtv: Set parameters permissions to 0444
> media: visl: Add a tpg_verbose parameter
> doc: media: visl: Document tpg_verbose parameter
> media: visl: Add codec specific variability on output frames
>
> Hans Verkuil (3):
> media: staging: imx: controls are from another device, mark this
> media: v4l2-ctrls-core.c: check min/max for menu, controls
> media: core: v4l2-ioctl.c: use is_valid_ioctl()
>
> Hsia-Jun(Randy) Li (1):
> media: v4l2-mem2mem: fix mem order in last buf
>
> Jernej Skrabec (4):
> media: cedrus: h265: Fix configuring bitstream size
> media: sun8i-di: Fix coefficient writes
> media: sun8i-di: Fix power on/off sequences
> media: sun8i-di: Fix chroma difference threshold
>
> Kells Ping (1):
> media: platform: cros-ec: Add Dita to the match table
>
> Kevin Hao (3):
> media: dvb_frontend: Use wait_event_freezable_timeout() for freezable
> kthread media: msp3400: Use wait_event_freezable_timeout() in msp_sleep()
> media: pvrusb2: Use wait_event_freezable() for freezable kthread
>
> Lucas Stach (1):
> media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak
>
> Markus Elfring (1):
> media: ti: Use devm_platform_ioremap_resource() in ti_csi2rx_probe()
>
> Matthias Schwarzott (1):
> media: zl10036: Fix my email address
>
> Ming Qian (2):
> media: imx-jpeg: Support for negotiating bytesperline with client
> media: amphion: Abort vpu parsing directly in seek
>
> Niklas Söderlund (1):
> media: rcar-csi2: Move driver to renesas directory
>
> Ricardo B. Marliere (1):
> media: bt8xx: make bttv_sub_bus_type const
>
> Vincenzo Mezzela (1):
> docs: media: fix typo in docs
>
> XueBing Chen (4):
> media: dvb-frontends: Clean up errors in cx24110.h
> media: stv6110x: Clean up errors in stv6110x.h
> media: Clean up errors in bcm3510_priv.h
> media: dvb-frontends: Clean up errors in tda8083.h
>
> Yang Li (1):
> media: mediatek: vcodec: Remove unneeded semicolon
>
> Documentation/admin-guide/media/visl.rst |
> 12 +- Documentation/driver-api/media/v4l2-subdev.rst
> | 2 +- MAINTAINERS
> | 1 + drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> | 2 + drivers/media/dvb-core/dvb_frontend.c
> | 13 +- drivers/media/dvb-frontends/bcm3510_priv.h
> | 6 +-
> drivers/media/dvb-frontends/cx24110.h |
> 8 +- drivers/media/dvb-frontends/stv6110x_priv.h
> | 8 +- drivers/media/dvb-frontends/tda8083.h
> | 8 +- drivers/media/dvb-frontends/zl10036.c
> | 2 +- drivers/media/dvb-frontends/zl10036.h
> | 2 +- drivers/media/i2c/msp3400-driver.c
> | 20 +--
> drivers/media/i2c/msp3400-driver.h |
> 2 +- drivers/media/i2c/st-vgxy61.c
> | 2 +- drivers/media/pci/bt8xx/bttv-gpio.c
> | 2 +- drivers/media/pci/bt8xx/bttvp.h
> | 2 +- drivers/media/pci/sta2x11/sta2x11_vip.c
> | 9 +- drivers/media/platform/amphion/vdec.c
> | 4 +-
> drivers/media/platform/marvell/Kconfig |
> 2 +
> drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c |
> 14 +- drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c
> | 16 ++ drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h
> | 1 + drivers/media/platform/renesas/Kconfig
> | 16 ++ drivers/media/platform/renesas/Makefile
> | 1 + drivers/media/platform/renesas/{rcar-vin
> => }/rcar-csi2.c | 0
> drivers/media/platform/renesas/rcar-vin/Kconfig |
> 16 -- drivers/media/platform/renesas/rcar-vin/Makefile
> | 1 - drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
> | 69 ++++----
> drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c |
> 5 +- drivers/media/test-drivers/vidtv/vidtv_bridge.c
> | 26 +-- drivers/media/test-drivers/visl/visl-core.c
> | 15 +- drivers/media/test-drivers/visl/visl-dec.c
> | 344 +++++++++++++++++++++++-----------------
> drivers/media/test-drivers/visl/visl.h |
> 1 + drivers/media/tuners/tda18271-fe.c
> | 1 - drivers/media/usb/go7007/go7007-usb.c
> | 4 +- drivers/media/usb/pvrusb2/pvrusb2-context.c
> | 8 +- drivers/media/usb/pvrusb2/pvrusb2-dvb.c
> | 12 +- drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
> | 11 +-
> drivers/media/v4l2-core/v4l2-ctrls-api.c |
> 2 +- drivers/media/v4l2-core/v4l2-ctrls-core.c
> | 5 +- drivers/media/v4l2-core/v4l2-ioctl.c
> | 2 +- drivers/media/v4l2-core/v4l2-mem2mem.c
> | 4 +-
> drivers/staging/media/imx/imx-media-csc-scaler.c |
> 1 + drivers/staging/media/imx/imx-media-fim.c
> | 2 +- drivers/staging/media/starfive/camss/stf-capture.c
> | 8 +- drivers/staging/media/sunxi/cedrus/cedrus_h265.c
> | 10 +- include/media/videobuf2-core.h
> | 13 +- 47 files changed, 398 insertions(+), 317
> deletions(-)
> rename drivers/media/platform/renesas/{rcar-vin => }/rcar-csi2.c (100%)
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2024-02-14 16:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-14 15:17 [GIT PULL FOR v6.9] Various fixes and enhancements Hans Verkuil
2024-02-14 16:32 ` [GIT PULL FOR v6.9] Various fixes and enhancements (#99152) Jenkins
2024-02-14 16:40 ` Detlev Casanova [this message]
2024-02-15 8:22 ` [GIT PULL FOR v6.9] Various fixes and enhancements Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11131784.CDJkKcVGEf@arisu \
--to=detlev.casanova@collabora.com \
--cc=arnd@arndb.de \
--cc=hverkuil@xs4all.nl \
--cc=jernej.skrabec@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.